Socket 754 Roundup: Comparing Generation 2
by Wesley Fink on May 28, 2004 5:57 PM EST- Posted in
- Motherboards
General Performance and Encoding
The values are so close together in Multimedia Content Creation and Business Winstone that you can basically conclude that the 5 tested boards are equivalent. There is no way to make a total variation from top to bottom of 0.4 points in Business Winstone or 0.5 points in Multimedia Content Creation significant. This variation represents only a 1.5% difference in the best and worst performance in this suite of 5 second generation Socket 754 boards. PCMark2004 is even more tightly clustered, with the spread from best to worst at only 0.9%.
The 2-pass Media Encoding benchmark also is of little help in differentiating the 5 boards in this roundup. As we have stated in earlier reviews, the on-board memory controller of the Athlon 64 tends to make any differences between boards much smaller than we have seen in the past with the memory controller on the chipset. This is particularly true in overall system performance and encoding benchmarks.
Facebook
Twitter
RSS
30 Comments
View All Comments
intercollector - Saturday, May 29, 2004 - link
I'm a little surprised to see why the MSI K8N didn't get the gold compared to the Epox. Both seem almost identical in every way, except that the K8N seems to include Firewire. Shouldn't this feature make it surpass the Epox board?The only downside of the MSI board seems to be the limit of a 300 max FSB, which is probably fine for 99.99% of overclockers.
Klaasman - Saturday, May 29, 2004 - link
#7-Thanks for link, but my KV8 Pro still wont boot when selecting "fixed" in bios setup.
Why wouldn't my board have the pro chip? Manufacturing screw up maybe?
Wesley Fink - Friday, May 28, 2004 - link
#6 -Bank Interleaving is not an option in any of the BIOS' tested here. Many current BIOS enable Bank interleaving by default. Where it is an option, we definitely enable the best interleaving option available and list what we set in the memory chart. We are not ignoring this option.
bigtoe33 - Friday, May 28, 2004 - link
If you are looking for the latest Abit KV8 pro bios have a look here. http://www.bleedinedge.com/download/bios/abit%20am...multi support and PCI lock inc. if your pro board won't lock the pci bus with this bios then your board may not have the pro chipset.
Myrandex - Friday, May 28, 2004 - link
Well after finishing the article, I was wondering why none of the boards are run with bank interleaving on? Doesn't it increase memory performance for the ones that support it?Myrandex - Friday, May 28, 2004 - link
On the KV8 spec page, it states:Onboard USB 2.0/IEEE-1394 8 USB 2.0 ports supported by nF3-250
No FireWire
Should be K8T800 Pro instead of nF3-250.
Myrandex - Friday, May 28, 2004 - link
Klaasman - Friday, May 28, 2004 - link
What revision of KV8 Pro were you using and what bios version?Nobody else with a recently purchased KV8 can get the locks to work. How come your board does?
Aikouka - Friday, May 28, 2004 - link
Anandtech should have looked at the problem that the Chaintech VNF3-250 has with it's RAID and installing an OS, and the problem where the board refuses to boot from SATA if you enable RAID on any IDE HDDs. People've said they've been able to circumvent it, but I haven't got it to work yet, and Chaintech is worthless when it comes to customer service. I received an automated response about 6 or 7 days after my initial submission on their website (they have no US phone number.) And I still have not received an email from a representative yet.RyanVM - Friday, May 28, 2004 - link
If there's so little variation in system performance between these, why not look at other aspects like USB throughput/CPU utilization, IDE/SATA throughput, ethernet throughput/CPU utilization, etc.Ace's Hardware just did a great article showing that the rather crummy components being used these days on cheaper motherboards have a pretty large impact in performance in those areas.
http://www.aceshardware.com/read.jsp?id=65000298