General Performance and Encoding


Content Creation Performance

General Usage Performance

MPEG-4 Encoding Performance

General Performance

The values are so close together in Multimedia Content Creation and Business Winstone that you can basically conclude that the 5 tested boards are equivalent. There is no way to make a total variation from top to bottom of 0.4 points in Business Winstone or 0.5 points in Multimedia Content Creation significant. This variation represents only a 1.5% difference in the best and worst performance in this suite of 5 second generation Socket 754 boards. PCMark2004 is even more tightly clustered, with the spread from best to worst at only 0.9%.

The 2-pass Media Encoding benchmark also is of little help in differentiating the 5 boards in this roundup. As we have stated in earlier reviews, the on-board memory controller of the Athlon 64 tends to make any differences between boards much smaller than we have seen in the past with the memory controller on the chipset. This is particularly true in overall system performance and encoding benchmarks.

Standard Performance Test Configuration Standard Gaming Performance
Comments Locked

30 Comments

View All Comments

  • Odeen - Monday, May 31, 2004 - link

    There is a difference between SATA native to chipset, and SATA native to the OS.

    SATA native to chipset means the chipset runs the SATA internally, off the Hypertransport or V-Link bandwidth, which is at least a gigabyte/second.

    Intel's implementation of SATA is cool because to the OS it emulates a standard IDE controller. (Thus it's "native" to the OS.) The downside of this approach is that every OS other than XP gets horribly confused seeing two primary and two secondary controllers. (i.e. your PATA1 is Primary, your PATA2 is Secondary, your SATA1 is.. again Primary) Without "compatibility" options in the BIOS, which limits you to four drives total (i.e. SATA channels become masters on IDE1 and IDE2, with PATA masters becoming slaves, and PATA slaves dropping off the map, or, as an alternative, PATA2 disappearing, and SATA1 and SATA2 becoming PATA1 Master and PATA1 Slave) Win2K and DOS-based utilities (such as bootable Antivirus or Partitioning program CD's and utilities like the drive test disks that you get with a hard drive,) fail on startup.

    Running SATA as a SCSI-over-IDE, requiring drivers, is a more flexible approach, but requires the use of driver floppies. Still, there's something neat about having four drives all hooked up as masters (2 SATA / 2 PATA) and installing XP without driver floppies.

    I'm not sure how it can be remotely possible with a 4 drive SATA controller, though.
  • sprockkets - Monday, May 31, 2004 - link

    Does anybody know if the NF3 chipset has any functionality similar to Intel's SATA, like is SATA done natively without needing any special drivers or programs for the os to use or understand?
  • rms - Monday, May 31, 2004 - link

    I also would have preferred to see feature benchmarking instead of cpu/memory benchmarking.

    rms
  • Zak - Sunday, May 30, 2004 - link

    2 RAM slots on the Abit mobo??? They call THAT an improvement??? Why can't there be at least 4? With 1GB chips' prices being still very high that would be a major selling point for many. I'd upgrade my mobo instantly if I could stick 4 512MB DDR400 chips and not have them run at 333...

    Zak
  • Odeen - Sunday, May 30, 2004 - link

    I'm very surprised that none of the motherboards except for MSI actually implemented all the features of their chipsets. Both the NF3-250GB and the K8T800 Pro support 4 chipset-level SATA ports, but only MSI has all 4. If it wasn't for that Corecell silliness, I'd be taking a long, hard look at the MSI board.
  • Crassus - Sunday, May 30, 2004 - link

    Whats the point of showing benchmarks when all the boards perform within margin of error? When the memory controller is part of the CPU there's IMHO little point in benchmarking it.

    Why not go after the components that make a bigger difference, esp. HDD, Ethernet and stuff in terms of throughput, CPU utilisation and so?
  • JustAnAverageGuy - Saturday, May 29, 2004 - link

    #11

    In RAM, generally speed increases are more noticible in real world performance than timings.

    Obviously if you have 400 cas 3-3-3-8, versus 400 cas 2-2-2-11, 2-2-2-11 would win. Generally though, speed is more important than timings after a certain point.

  • bigtoe33 - Saturday, May 29, 2004 - link

    #9

    I think you may have one of these supposed 3000 boards that have non-pro chipsets that Abit says are pro chipsets but really appear to be not..

    I would take your issue to Abit.
  • qquizz - Saturday, May 29, 2004 - link

    Concerning the overclock. I can overclock the crap out of my XP2100+, but I keep it at levels where it's stable using Prime95 and Memtest. I wonder if these overclocks can meet my standards?
  • gplracer - Saturday, May 29, 2004 - link

    All of the ram in this comparision was CAS3. I wonder how the CAS3 at 270mhz compares to CAS@ at 250mhz. I run my corsair at that speed now.

Log in

Don't have an account? Sign up now