Index

Today, we release our seventh Buyer's Guide in the past 7 weeks. You can look forward to Buyer's Guides in the middle of every week, and then, after the end of each month, we will retool our guides to reflect the new hardware and pricing of that particular time period. Today, we are continuing the refresh of our Buyer's Guides to see what has changed, if anything, in the past 4 weeks. In case you haven't read our new Buyer's Guides yet, here's the basic format of them to be released on a weekly basis:

Week 1: Entry Level System
Week 2: Mid-Range System
Week 3: High End System
Week 4: Overclocking System

For every component that goes into a computer, we offer our recommendation for a piece of hardware as well as our alternative on that type of hardware. We've added alternative hardware picks to our guides because it allows AnandTech to recommend a wider variety of hardware (especially for those willing to spend a little more than what we budget for a particular system). Alternative picks tell you just that - your alternatives, which in some cases will be better suited for your needs, and in other cases, will not be. But at the same time, we can still be assertive enough with a first place recommendation so that new buyers aren't indecisive or confused about what to purchase. Most of the prices listed for the hardware that we recommend can be found in our very own RealTime Pricing Engine. Any prices not found in our engine can be found on pricewatch.com. We list pertinent parts of our RealTime pricing engine at the bottom of every page of our Buyer's Guides so that you can choose the lowest prices from a large variety of vendors all by yourself.

We are always taking suggestions on how to improve our Buyer's Guides. If you feel that we are not including a wide enough variety of systems in our guides, please let us know and we can see if it warrants an additional weekly Buyer's Guide.

High End Systems

Before we go into a little detail about what you need to know about building a high end system, we need to first reiterate what you should remember about entry level and mid-range systems.
  1. Entry level systems should be constructed mainly with reliability and price in mind, with performance a fairly distant third consideration.
  2. Mid-range systems place reliability as a number one priority, but performance and price are in a sort of not-so-distant tie for second place.
For a more in-depth explanation of our thoughts on what you should prioritize with entry level and mid-range systems, take a look at our entry level and mid-range guides from the last two weeks here and here.

Anyway, when building a high end system, performance is usually going to be your most important consideration. That is, when building a high end system, you want to make sure that you're picking the hardware that performs the best for the programs you use the most. While you could say that reliability is the second most important consideration when building a high end system, it would probably be more appropriate to say that reliability is the #1 priority. Understandably, price is a distant third consideration. This should be pretty self-explanatory, as anyone who is considering building a top-of-the-line system needs to realize that parts aren't going to be cheap. This guide by no means disregards price altogether, as we aren't going to be building a $10,000 system here. Rather, we are building a system that will cost under $5,000, but with the final price much closer to $1,000 than $5,000.

CPU and Motherboard Recommendations
POST A COMMENT

43 Comments

View All Comments

  • thatsright - Friday, April 02, 2004 - link


    You have a picture of a ASUS Motherboard where it should be a picture of the ABIT IC7-G.

    And it seems like you folks only 'pick' products from your advertisers or manufactures which send AT review samples (tisk, tisk).

    I like the AT system guides somewhat, but I still believe that the SharkyExtreme.com sys guides are put together with a lot more care and style.

    Am I banned yet?
    Reply
  • cK-Gunslinger - Friday, April 02, 2004 - link

    On the summary chart, you only show 2x256MB for the memory configuration. That should be 2x512MB, no? Reply
  • Hooligan2 - Friday, April 02, 2004 - link

    Why do you recommend the powercolor radeon9800 when I always see the ATI Radeon 9800 doing better in the benchmark gaming tests? (sorry if I missed it...I am new to the site) Reply

Log in

Don't have an account? Sign up now