Construction — Build, Appearance, Size (continued)

The Inspiron 8600 follows the same basic design as the Latitude D800, which we covered in our Centrino roundup, but we will go over it nevertheless. The front of the Inspiron 8600 is practically bare, excluding a screen release mechanism (a simple push design, which is more user friendly than the slide release mechanisms) and two speaker ports. The left and right speakers are spaced about 3" inches from the center of the system, and is slightly angled down since the front of the system is sloped down. This helps prevent hands from creating a layout conflict with the speakers, and at the same time, it channels the sound to the surface, where the system lays.

Click to enlarge.


Starting from the left, the side of the Inspiron 8600 reveals a hard drive bay, which can be removed via a single screw on the bottom of the system. Removing the hard drive bay involves removing the cutout, which also houses two audio ports, one for headphones and the other for microphone in. To the left of this is the unit's PCMCIA card slot, which houses a dummy card. Directly below this is where the D800's smart card reader would be, which is seen infrequently in other mobile systems (for the 8600, the gap is filled). Dell told us previously that this was due to direct customer feedback, and it provides “what you have” security into the pre-existing “what you know” security infrastructure.

Below the PCMCIA card slot and where the smart card reader would be is the system's IR window. Traditionally, we are used to having the IR window on the right side, but this didn't seem to cause any problems for us. If anything, it did make it easier to transfer files via IR between two mobile systems. To the left of this stack is the single 4-pin IEEE-1394 unpowered firewire port. We were previously informed by Dell that they plan to move away from the mini-IEEE-1394 port and replace it with a full-sized firewire port. We are still waiting to see what is going to be carried out.

At the furthest left is the unit's cooling vent. Cool air is drawn in from here and passes over the heatsink surface before exiting the system from the bottom.


Click to enlarge.


The large holes on the back right side of the system are hot air exhaust ports. Directly behind them lies the system's CPU heatsink. The next port (going from right to left) is the power port. Dell has wisely chosen to stay away from keyed power plugs in favor of a circular plug, which can be inserted in any direction. To the left of the power port is a recessed portion of the system, which is home to three ports: a serial port, a VGA-out port, and a parallel port. The recessed design helps keep the amount of cable protruding form the back at the minimum. The back of the system also is home to a modem jack, ethernet jack, two USB 2.0 ports, and a S-video out port, which are left to the recessed portion of the system.


Click to enlarge.


The Inspiron 8600 features one major difference from the Latitude D800, which is noticeable on the right side of the system. Where the D800 has a “D/Bay” connector and an USB 2.0 port, the 8600 has nothing. This portion of the system instead is covered up with nothing behind. To the left of this is the modular bay, which houses a DVD+RW drive (the default selection). So far, the system is only configurable with the CD-RW/DVD combo drive or a DVD+RW drive. The modular bay can also accept a floppy drive, a second battery, or a second hard drive. The devices are hot swappable via a release lever that is built into drive bay mechanism. However, according to Dell's configuration page for the 8600, a modular hard drive doesn't seem to be available.

Near the front of the system is home to a lock port on both the left and right side of the system. This gives more freedom for users to arrange their system's position in relation to where the system will be locked up.


Click to enlarge.


There are three access panels on the bottom of the 8600. The large panel in the center of the system is home to the system's two SODIMM slots. Our test system came configured with 512MB of memory, which populated only one slot. The smaller access panel to the right is home to the mini-PCI slot and the internal modem.

Dell has made wisely the choice to create a simple removable component out of the CPU fan. Only two screws hold the fan in place, which has been designed to be easy for the user to remove. The CPU fan is usually one of the first components to break and/or become noisy. Because Dell has fashioned a user accessible CPU fan, Dell has decreased the amount of support and overhead they need to provide users. Instead of a user sending in the entire system, Dell can now ship out a replacement fan for end-users, which the consumer can install. Additionally, the easy access reduces the amount of service that Dell needs to provide, since the user can perform the function themselves.

The long slot along the back of the system is the docking station connection. Dell's new docking solutions are of particular interest, since they offer DVI out connections and a monitor stand that allows the system to serve as a display with an external keyboard and mouse.

The 8600 fashions a typical Dell battery, which has a push button that provides the charge status of the battery via 5 LEDs. Each LED accounts for 20% of battery charge. This may seem like a small feature. But it will definitely come in handy, because a user no longer has to boot up to find out how much battery charge is left.


Click to enlarge.

Click to enlarge.


As we stated for the D800, we have some mixed feeling about the 8600. The use of the Pentium-M processor and Centrino technology should have allowed Dell the freedom to create a more thin and lightweight notebook. However, the Inspiron 8600 is fairly large at 14.2" x 10.8" x 1.5", which keeps it out of the thin characterization. With a weight of about 7 pounds or greater, the 8600 is certainly not lightweight. Compared to other previous Dell systems, the 8600 is thinner, but there is some work to be done for it to measure up to other thin and light notebooks. This isn't denying the fact that the 8600 and the D800 are certainly powerful notebooks, but it would have been nice to see some of the advantages of Centrino technology, in terms of form, taken advantage of.


Construction - Build, Appearance, Size Construction - Under the Hood
Comments Locked

21 Comments

View All Comments

  • Andrew Ku - Saturday, October 11, 2003 - link

    Hey bud :), I don't recall 386 processors in notebooks that used sockets... In fact, only recently have notebooks on such a wide scale used molex socket designs to house processors, and this is more for the ease of scalability and or the need to use desktop components. Remember that when you are talking about the mobile side of pcs, often times it becomes an entirely different ball park than when compared to the desktop side.

    Btw, if you are refering to the use of "molex," it is a technically correct term. Additionally, we did not write "molex connectors." If you read page 4, you will see that we instead wrote "molex socket."
  • Anonymous User - Saturday, October 11, 2003 - link

    I just wonder when CPU's went from using sockets ," as they have done since the 386" , to using molex connectors as refered to in the article , should technical writers proof read more ????

    bandwidthboy
  • Anonymous User - Friday, October 10, 2003 - link

    The 7200 rpm uses less power if used over time..indicated by the write wattage.
    Here's a quick comparison of wattage use from the previous 60GB/5400 rpm model vs the 7K60/7200 rpm model:

    60GB/5400 RPM vs 60GB/7200 RPM:
    Max (startup/spinup) - 5W vs 5.5W
    Seek (avg): 2.6W for both
    Read (avg): 2.5W for both
    Write (avg): 2.7W vs 2.5W
    (7K60 slightly lower)
    Performance idle (avg): 2.0W for both
    Active idle (avg): 1.3W for both
    Sleep: 0.1W for both
  • Anonymous User - Friday, October 10, 2003 - link

    well if you guys are looking for m10's in laptops you can try looking here:

    http://atitech.com/buy/onboard/mobile/mobilityrade...

    you can also try http://pctorque.com, they have the same laptops as some of the ones on the ati site but a little cheaper i think (plus there's one that has an option for a 2x dvd-rw drive and a built in tv tuner :) (that's if you're willing to dish out upwards in about $3000US for it
  • Anonymous User - Friday, October 10, 2003 - link

    # 4 If you want quality settings like FSAA & Aniso the ATI is much..much.. better.
    Also 2D graphics quality is on the ATI A LOT better!!
  • Anonymous User - Thursday, October 9, 2003 - link

    He meant for a monitor only, read more carfully
  • Anonymous User - Thursday, October 9, 2003 - link

    # 2 try 2300.00 w/out a M10
  • Anonymous User - Thursday, October 9, 2003 - link

    Actually they are not nearley that expensive for the 17" wide screens. Samsung has one of the best, the 172w.

    http://www.newegg.com/app/viewproduct.asp?DEPA=1&a...

    Well, I have a 8600 on the way, wont ship until early november because dell claims the 1920x1200 screens will not be in until OCt 28.
  • Anonymous User - Thursday, October 9, 2003 - link

    I totally agree on the fact that Dell should offer a notebook with the Ati M10(p) !!!
    ...I live in Belgium ( Europe ) an dcannot find a "known" brand with an ATI M10(p) offer...
  • Anonymous User - Thursday, October 9, 2003 - link

    Yes there out there but pricey, a 17" $700 -800 on up...

Log in

Don't have an account? Sign up now