DDR400 Test Results (continued)



DDR400 Test Results Final Words
Comments Locked

17 Comments

View All Comments

  • Wesley Fink - Tuesday, September 2, 2003 - link

    MUSHKIN PC3500 LEVEL II AT FSB1000, 5:4 (DDR400, 2-2-2-5)

    We ran 1000FSB (500) at 5:4 with Mushkin PC3500 Level II at CAS 2-2-2-5. The testbed and ALL hardware and settings were the same as this review except for FSB/Ratio. Results are:

    Sandra UNBuffered - 2964/2959 or avg. 2962
    Sandra Buffered (Standard) ? 5470/5468 or avg. 5469
    Quake 3 ? 393.7fps
    UT2003 ? Flyby: 241.84
    Botmatch: 87.66
    SuperPI (2M places) ? 105s

    Write these numbers down and compare them to DDR400 on page 8&9 and DDR500 in Part 2 Page 14 (500FSB/DDR500) charts. You will see that 5:4 2-2-2-5 is very close to the performance of the DDR500.
  • Anonymous User - Tuesday, September 2, 2003 - link

    Oops... I have to take my last comment back. :(

    I have read through the whole article, and I dont see 250 FSB 1:1 3-4-4-8 vs 5:4 2-2-2-5 (200fsb vs. 250fsb ram speed) If they arent both tested together at the same CPU speed and FSB, only with the mem speed and timings change, its not perfect... But still a good review anyhow. :D

    Retrospooty
  • Anonymous User - Tuesday, September 2, 2003 - link

    Awesome review Wes,

    You took user feedback from the last review and tested your ram in a way NO OTHER REVIEWER HAS DONE SO FAR !!!! The right way.

    Well done my friend, well done.

    Retrospooty
  • Anonymous User - Tuesday, September 2, 2003 - link

    Black is cool!

    the mushkin PC3500 Level II is the perfect combination with a IC7 Max3.

  • Anonymous User - Tuesday, September 2, 2003 - link

    Given your propensity (and abuse by others) for OCZ, why did'nt you include OCZ platinum 3500 which is their ultra low latency RAM in this test. I have 2x256Mb OCZ platinum PC3200 (PC3500 wasnt and still isn't available in Australia when I built my system) in an ABIT IC7-G with 2.6C CPU. I get 2-2-2-5 to 190Mhz, 2-2-3-5 to 218 MHz and up to 230MHz on looser settings. I am moderately satisfied with this but I was offered CORSAIR XMS 3200 at time of purchase and, given your comments about Rev 1.1, I perhaps regret the path I took!
  • wicktron - Tuesday, September 2, 2003 - link

    I think you need to change the titles of the graphs on this page: http://www.anandtech.com/memory/showdoc.html?i=185...

    to DDR400 rather than DDR500.
  • wicktron - Tuesday, September 2, 2003 - link

    Great review Wes.

Log in

Don't have an account? Sign up now