Gigabyte 8KNXP

Motherboard Specifications

CPU Interface
Socket-478
Chipset
Intel 82875P MCH (North Bridge)
Intel 82801ER ICH5R (South Bridge)
Bus Speeds
up to 355MHz (in 1MHz increments)
Core Voltages Supported
up to 1.600V (in 0.0250V increments)
I/O Voltages Supported
N/A
DRAM Voltages Supported
up to 2.8V (in 0.050V increments)
Memory Slots
6 184-pin DDR DIMM Slots
Expansion Slots
1 AGP 8X Slot
5 PCI Slots
Onboard IDE RAID
ITE GigaRAID 8212F controller (RAID 0, RAID 1 & RAID 0 + 1)
Onboard USB 2.0/IEEE-1394
Eight USB 2.0 ports supported through South Bridge
TI TSB43AB23 IEEE-1394 FireWire Controller (up to 3 ports total)
Onboard LAN
Intel PRO/1000CT Gigabit LAN (CSA bus)
Onboard Audio
Realtek ALC655 codec
Onboard Serial ATA
Two SATA connectors via ICH5R (RAID 0 & RAID 1 only)
BIOS Revision
Rev. M4 (6/03/2003)

There are usually quite a few unique features to talk about when reviewing a Gigabyte motherboard, and in the 8KNXP's case there are boatloads of features unique to this motherboard.

An interesting feature that Gigabyte has included on such motherboards as the 8INXP (E7205 chipset) and SINXP1394 (SiS 655 chipset) is Dual Power System 2 (DPS 2). This is a separate, add-in card that gives the 8KNXP 6-phase power circuitry instead of 3-phase. Gigabyte claims that, in Parallel mode (versus Backup mode), DPS 2 is able to deliver better system stability (especially while overclocked) in addition to longer onboard components life.

Another feature unique to Gigabyte motherboards (for the most part) is their dual BIOS feature. As we mentioned in the AOpen AX4C Max section, having two BIOS chips can be helpful if you've permanently corrupted your first BIOS chip (through a flash programming error for example) and instead being forced to RMA your board or replace the chip yourself your board will simply revert to the second backup BIOS chip.

The defining feature of the 8KNXP is its leading Serial ATA and IDE support. As usual the Primary and Secondary IDE connectors support two channels each, or up to four IDE devices total. There are also two additional IDE connectors powered by the GigaRAID IT8212F controller. This ATA133 GigaRAID controller was developed by ITE, and is capable of RAID 0 (striping), RAID 1 (mirroring) and RAID 0+1 arrays (read more about this IDE RAID controller here) while also being able to support a total of four drives. What's especially nice about the ITE GigaRAID controller is that it doesn't just support four hard drives but also ATAPI (optical) drives as well. This is a huge advantage over other motherboards with Promise or Silicon Image controllers that are capable of supporting only hard drives. In total you will be able to connect a combination of twelve different Serial ATA or IDE drives to the 8KNXP. This is one of the highest amount of drive support we've ever seen a desktop motherboard.

The most negative aspect of the Gigabyte 8KNXP is its price. Currently this motherboard is selling for between $215 and $225 in the U.S., with barely a handful of vendors offering the 8KNXP for under $220. This is quite a lot for a desktop motherboard, no doubt about that. However when it comes right down to it power users aren't exactly concerned with price when they're building their dream system. So for those types of users the 8KNXP couldn't be a better match.

UPDATE 6/19/2003 We should also mention that you must hold the CTRL key and press F1 to bring up the Advanced Chipset Features section, where you will be able to adjust your memory module's timings.

Gigabyte 8IPE1000 Pro Gigabyte 8KNXP Ultra
Comments Locked

18 Comments

View All Comments

  • Anonymous User - Thursday, July 24, 2003 - link

    Could anyone clarify if the information for the sound system on the Abit IS7 is correct? The article lists it as being an Analog Devices AD1985. I thought it was Realtek?

    Thanks,
    Harry
  • Anonymous User - Wednesday, July 23, 2003 - link

    What a great article!
    We're waiting for the Part 2... :B
  • Evan Lieb - Monday, July 21, 2003 - link

    I bet that the Part 1 thread would be posted by a certain date, and it was indeed posted on that date. I never anything about Part 2, because I've been thinking of adding more benchmarks and data in general to round out any and all Pentium 4 motherboard testing until Prescott arrives.

    Anonymous User #4, you should always research your recollections if you can't exactly "recall" certain events correctly. ;)
  • Evan Lieb - Monday, July 21, 2003 - link

  • Anonymous User - Friday, July 18, 2003 - link

    As I recall, Evan made a bet on the part 2 being posted a while back.... the thread was mysteriously removed though.
  • Anonymous User - Wednesday, July 16, 2003 - link

    So, what month/year will part 2 be posted?
  • Anonymous User - Sunday, July 6, 2003 - link

    I read that the Epox 4pca3+ could do a 1,85 vcore with a bois update.. If anyone know where to find this bios update, please e-mail me zimen1@msn.com
    I really can't find it.
  • Anonymous User - Sunday, July 6, 2003 - link

    I also fried my MSI 875P Neo-FIS2R when I updated the BIOS from 1.2 to 1.4. I got a replacement board, but have been hesitant to try again based on my prior experience. Based on your experience with 1.5, (and now 1.6 is available), I'm willing to take another chance.

Log in

Don't have an account? Sign up now