Update: We got some more information about presler and other dual core items we mentioned below.

First, we have die sizes and transistor counts for the Pentium D (Smithfield) and the new dual core Pentium Extreme Edition chips:

- 206 mm^2 90nm die
- 230M transistors

Note that the sizes and transistor counts we're talking about here is basically on the level with the announced Cell microprocessor, also built on a 90nm process (but with SOI). Also note that the number 4 has been dropped from the name, the new dual core processors will simply be called the Pentium D and the Pentium Extreme Edition.

While the Pentium D and the dual core Pentium EE are basically two Prescott 1M cores glued together, their 65nm successor (presler) is a bit different. presler appears to have two physically separate cores (two pieces of silicon), each with a 2MB L2 cache (for a total of 4MB of L2 cache). As we mentioned below, presler is also HT enabled for a total of 4 thread simultaneous execution. The reason for making presler two separate pieces of silicon is a matter of yields, since a single dual core silicon would have a larger die surface area than two separate cores.

It is possible to, in both the 90nm and 65nm dual core chips, to cut away or disable (respectively) a non-working core in order to make the chip single-core.

Intel has revealed a bit about future plans, saying that they will be at 8 threads (per chip or per core?) by the end of the decade. The other interesting note is with regards to Intel Xeon platforms, more specifically the upcoming Truland 4S platform.

Truland 4S supports Intel's dual independent bus architecture, meaning that each CPU in a two socket configuration will have its own 1066MHz FSB, as opposed to the shared 667MHz FSB that they have to contend for right now. The other interesting feature is its quad channel DDR2-400 support to match up with the added FSB bandwidth.

More information as we get it, the original article is below as it was originally written.

 

Unfortunately the NVIDIA keynote on nForce for Intel was pretty much useless as it was basically a rehash of all of the features of nForce4 SLI. NVIDIA did have a working demo and we will try to get a closer view of it at the Technology Showcase later today.

Luckily all is not lost, Intel had some very interesting demos in their Multi-Core Zone. The first thing that attracted our attention was a running demo of the upcoming 65nm presler processor. presler will be the second desktop dual core processor (after Smithfield) to be released sometime in 2006. There's not too much to talk about with presler, but the fact that Intel had a demo up and running on a 65nm process was pretty impressive.

The chip was running on an Intel 955X motherboard, as were all of the dual core desktop platforms in the pavillion.


All of the dual core desktop demos used this motherboard

We managed to get a few screenshots before they pulled the keyboard off of the system:

It looks like the chip was running at 2.0GHz, which isn't too impressive in itself, until you remember that we're talking about a 65nm processor here whose launch is over a year away.

The chip also appears to have Hyper Threading enabled as task manager showed four logical CPUs present:

The first desktop dual core chips will be the Pentium 4 D and the Extreme Edition, both of which will be 90nm chips.

65nm Mobility
Comments Locked

21 Comments

View All Comments

  • RectronBot - Thursday, March 3, 2005 - link

    I find it odd because the photos depict ATX, not BTX, which Intel have been pushing of late. Are they un decided as well perhaps?
  • Viditor - Thursday, March 3, 2005 - link

    "AMD's dual cores may top out at 2GHz"

    AMD's dual cores will START at 2.2 and 2.4 GHz...already announced. And the TDP will be 100w (there was an errant report of 110w, but that has been corrected). Also, remember that that's an AMD TDP which yields a much lower actual power level (because they apply the worst possible scenario). Expect them to run in the 70-80w range under load...

  • suryad - Wednesday, March 2, 2005 - link

    Wow I am definitely wowed by the array of all these new tech coming out...ahh I love the smell of oncoming tech...quiet some perf increases eh? Nice..AMD is not going to be sitting around quietly, I am sure there will be some massive competition now Intel has gotten over its Prescott-can-scale -o-5 GHz fiasco...
  • solbergn - Wednesday, March 2, 2005 - link

    At the end of the article, Anand says that ID and Epic will have multi-threaded gaming engines next year, but what about Quake 3 SMP? I may be insane, but I had a dual P-III 1ghz machine that I ran Quake 3 and RTCW in SMP mode by modifying a line in the .ini.

    Anyone tried the awesome Q3 benchmark with SMP enabled on a P-4? That could give us a preview anyways.
  • smn198 - Wednesday, March 2, 2005 - link

    "While the Pentium D and the dual core Pentium EE are basically two Prescott 1M cores glued together..."

    I wonder what sort of glue they use
  • ceefka - Wednesday, March 2, 2005 - link

    This Intel show is much more promising than the Smithfield showcase. Hopefully these new cores will counteract global warming ;-)

    That Truland 4S bus architecture + quad channel DDR2 support looks to be the final answer to AMD's CPU interconnect and on die memory controller. This will help the Xeon big time. It doesn't say however when Intel will launch this or how they expect it to perform in a 4-way box.
  • dm - Tuesday, March 1, 2005 - link

    nice demo, i just don't like the chassis and that fancy effect on the stock intel cooler...
  • kmmatney - Tuesday, March 1, 2005 - link

    Its interesting that the motherboard used for all the dual core cpu's isn't BTX. At least it looks like a normal ATX board to me.
  • bersl2 - Tuesday, March 1, 2005 - link

    #8: The first series of dual-core Opterons will tentatively run at 2.2 and 2.4 GHz, at 110W maximum.

    Sorry to burst your bubble.
  • Jeff7181 - Tuesday, March 1, 2005 - link

    That's awesome... can't wait for all this dual core goodness to hit the market and be reasonably priced.

Log in

Don't have an account? Sign up now