Readers following our wireless networking coverage must be quite familiar with the developments in 802.11ac land. As a recap:

  • The first 3-stream 802.11ac routers (based on the Broadcom BCM4706 chipset) started shipping in May 2012, with Buffalo Technologies and Netgear leading the way. There were marketed as AC1750 units (3x3 5 GHz providing  up to 1300 Mbps and 3x3 2.4 GHz providing up to 450 Mbps). The street pricing of the AC1750 routers started to go down once Qualcomm started shipping their first-generation 802.11ac router platforms in products such as the TP-LINK Archer C7 in April 2013.
  • In Q4 2013, a wave of AC1900 units started to hit the market. Netgear's Nighthawk R7000, a popular member in this series, still continues to sell well in the market. These units still used a 3x3 5 GHz radio for up to 1300 Mbps, but the 2.4 GHz had some proprietary Broadcom extensions (TurboQAM) to support up to 600 Mbps in an end-to-end Broadcom environment.
  • In 2014, Quantenna began to bring their technology lead in the Wi-Fi space to the market with their Wave 2 4x4 802.11ac chipset. Despite being announced at CES 2014, the Asus RT-AC87U began to ship in July with the QSR1000 radio coupled with a Broadcom SoC. Netgear started to ship the same radio coupled with a Qualcomm IPQ8064 SoC in the Nighthawk X4 in September 2014. The QSR1000's Wave 2 feature set includes support for MU-MIMO, but neither of these routers shipped with MU-MIMO enabled in the firmware (citing lack of client support at that point of time). Given the 4x4 configuration, these routers were tagged as AC2350 / AC2400 units (600 Mbps in the 2.4 GHz band and 1733 Mbps in the 5 GHz band)
  • In the midst of these Wave 2 product launches, Qualcomm announced plans for their Wave 2 802.11ac platforms (both routers and clients) in April 2014. Broadcom, being late to the Wave 2 party, decided to bring out the XStream platform with dual 5 GHz radios (six-stream configuration) also in April. They were able to get it quickly into the market too, with the Netgear Nighthawk X6 R8000 becoming available in June 2014.
  • At CES 2015, we saw the first set of routers based on Qualcomm's QCA9880 4x4 Wave 2 802.11ac router platform getting announced. Vendors such as TP-LINK and TRENDnet were expecting their AC2600 class routers to ship towards the middle of the year.

Coming back to today's announcement regarding the EA8500, Linksys is becoming the first vendor to start shipping a QCA9980-based router. The important aspect here is that the router will ship with MU-MIMO enabled. Client devices with MU-MIMO enabled are also coming into the market just now (more on that in our detailed review). Hopefully, this announcement will spur both Netgear and Asus to enable MU-MIMO in the firmware for their Quantenna-based routers.

The salient features of the EA8500 router are listed below:

  • 4x4 802.11ac with MU-MIMO and beamforming support
  • QCA9980 radio + 1.4 GHz dual-core IPQ8064 SoC
  • Simultaneous dual-band operation (5 GHz 802.11ac - 1733 Mbps, 5 GHz 802.11n - 600 Mbps, 2.4 GHz 802.11n - 800 Mbps)
  • 1x USB 3.0, 1x USB 2.0 / eSATA
  • 4x 1Gbps LAN, 1x 1Gbps WAN
  • Adjustable antennas for optimal performance

One important point to note is that MU-MIMO capabilities will translate into real benefit only when there are multiple MU-MIMO-capable client devices talking to the router simultaneously. This will probably be a common scenario in enterprise Wi-Fi deployments soon. However, in a typical household, we would imagine that a situation involving multiple MU-MIMO clients is probably at least a good year away. Qualcomm is targeting an end-to-end play here, as the announcement made last year included a number of products in the client space with MU-MIMO capabilities.

Linksys is accepting pre-orders at $280 for the EA8500 today with shipments slated for May 10, 2015. Wide retail and e-tail availability is also expected starting next week. There is no doubt that MU-MIMO will be the most efficient way to boost Wi-Fi performance in the near future, and it is good that Linksys and Qualcomm are teaming together to accelerate its market adoption.

Source: Linksys

POST A COMMENT

83 Comments

View All Comments

  • jeffkibuule - Thursday, May 07, 2015 - link

    Only 1gbps WAN? Reply
  • close - Thursday, May 07, 2015 - link

    I guess the most common use cases for this router didn't justify a higher WAN link speed.I don't think many people have a WAN link of 2 or more Gbps. To integrate one would bring higher costs and power consumption. Reply
  • nathanddrews - Thursday, May 07, 2015 - link

    While true for the majority, there are more and more gigabit+ ISP options coming every day. It would be a shame to be limited by your router - assuming you get the speed you pay for. I just assume that most people that currently have gigabit service are only getting around 900Mbps in reality - 10% less than advertised due to physical constraints. Reply
  • Flunk - Thursday, May 07, 2015 - link

    I don't think I've seen any home LAN equipment with > 1GBps Ethernet ports. You have to move up the chain to get those. Reply
  • Uplink10 - Thursday, May 07, 2015 - link

    You are paying $280 which is alredy moving up the chain of money class, shouldn't hardware be too moving up the chain? Reply
  • DanNeely - Thursday, May 07, 2015 - link

    10GB networking gear makes top of the line AC routers look cheap. :( Reply
  • matt_hall - Monday, November 09, 2015 - link

    The price is something I didn't expect with what this router has. I have a Securifi Almond Router, it's a router and wireless extender in one. Highly recommended because of it's speed and easy setup. Found one here: http://www.consumerrunner.com/top-10-best-routers/ Reply
  • minijedimaster - Friday, May 08, 2015 - link

    The fact that you think $280 is anywhere near "up the chain" shows how little you know about enterprise class networking equipment. Reply
  • jimmy$mitty - Thursday, May 14, 2015 - link

    The biggest problem is that there are no 10Gbe integrated NIC cards. And a card is $300 bucks and requires a PCIe x8 lane to work.

    Right now it is too expensive to try and make a consumer router that supports 10Gbe. The cheapest decent switch, not even a full on router, that I could find was $300 bucks. Add in all the features like 802.11ac, 4x4, USB/eSATA and other features you want and it would easily be a $600+ cost router.
    Reply
  • nathanddrews - Thursday, May 07, 2015 - link

    I never said otherwise? Reply

Log in

Don't have an account? Sign up now