X99 No Limits

Halo motherboards require users with either very deep pockets or very specific needs. X99 is already a premium platform, catering for a small amount of the market, but this is ultimately the land of the enthusiast or the prosumer. Barring some kind of lottery win, this users are typically aged between 25-40 and want to invest in their entertainment or their business. As a result, some manufacturers oblige with their most prestigious products – ones that might make a loss per unit, but give something money cannot buy: brand recognition and that halo viewpoint.

ASUS Rampage V Extreme at $476

To that end, the two of the most expensive X99 motherboards on Newegg right now are actually two motherboards we have in to review but have not tested. The ASUS ROG Rampage V Extreme follows a long line of successful ROG products. ASUS did not produce a Z97 ROG Extreme version because they were working on this model in order to replicate the successes of the X79 Rampage IV Extreme being their best seller.

The big benefit for previous Rampage IV Extreme users moving to the new platform is the chipset, with more SATA 6 Gbps, USB 3.0, M.2 and SATAe support. Similarly to last generation, the motherboard has the ROG OC Panel bundled which costs $100 separately. The hardware and software is all updated for X99, giving 3T3R 802.11ac WiFi, Sonic Radar 2, 5-Way Optimization, Sound Stage and other features also found on the X99-Deluxe.

The Rampage is a little different in that ASUS’ ROG R&D spend significant time in terms of overclocking potential, increasing margins and compatibility with other high end components: CPU, GPU, DRAM. The Rampage is also targeted at extreme overclockers, giving them suitable ranges of BIOS options to go a little bit mental with liquid nitrogen and breaking overclocking records.

ASRock X99 Extreme11 at $650

In a similar mindset but a different direction, ASRock now has established their Extreme11 line as a high end model focused on lots of storage and lots of GPU power. At the time of writing, the X99 Extreme11 is the most expensive motherboard on the market, and this is because of two reasons. Firstly, the LSI 3008 RAID chip on the board gives the system an extra 8 SAS/SATA 6 Gbps ports with enough bandwidth from eight PCIe 3.0 lanes from the CPU. This complements the 10 SATA 6 Gbps ports from the chipset, for 18 in total.

Next is the PCIe 3.0 x16/x16/x16/x16 support for four-way GPU arrangements (or x16/x8/x8/x8/x8/x8/x8 for 7-way compute), available due to the dual PLX8747 chips used on board. We covered these in our Z77 PLX coverage, and for an extra $60-$80 cost on the motherboard each, these act as PCIe lane FIFO buffers and muxes to improve inter-GPU bandwidth. For good measure ASRock also gives the motherboard the high end treatment from power delivery, dual Intel NICs, improved Realtek ALC1150 audio and connected heatsinks. Due to the power output of the LSI 3008 and PLX8747 chips, the heatsink uses a fan which can be controlled via software.

We have both the Rampage V Extreme and X99 Extreme11 in the office for future reviews. Stay tuned for those.

X99 at $300 X99 in microATX
Comments Locked

15 Comments

View All Comments

  • 2late2die - Thursday, November 27, 2014 - link

    I'm surprised the MSI X99S XPOWER (http://www.newegg.com/Product/Product.aspx?Item=N8... isn't on your no-limits list. Spec for spec it offers the same features as the rampage V, even surpassing it in a couple of areas, while maybe lagging behind in couple of others. All that for almost $100 cheaper with better OC tools, and at least in my opinion better aesthetics.
  • Mikemk - Thursday, November 27, 2014 - link

    Looking at specs, I hadn't actually realized the x99s was budget.
  • Antronman - Monday, December 8, 2014 - link

    The RoG brand name carries a lot of weight.

    Generation after generation, the leaders in Extreme OCing.
  • mbaroud - Thursday, November 27, 2014 - link

    Does the Asus deluxe support the Samsung xp941?
  • kwerboom - Thursday, November 27, 2014 - link

    Will Anandtech a DDR4 Memory Roundup like either http://www.anandtech.com/show/6372/memory-performa... or http://www.anandtech.com/show/7364/memory-scaling-... soon?
  • Senti - Thursday, November 27, 2014 - link

    The usual review from Ian – he doesn't even look at what he is reviewing, just copy-pasting the same phrases. "x16/x8/x8/x8/x8/x8/x8 for 7-way compute" on Extreme11 with only 5 PCIe slots? Sure!
  • extide - Sunday, November 30, 2014 - link

    Yeah, I noticed that too, pretty sloppy!

    Also as an aside, I would really like to know the exact PCIe lane allotment for all of these boards. In-fact I would LOVE to see a PCIe lane assignment diagram standard from EVERY motherboard, it would be good to see it in the manual, especially these days as this stuff is getting more and more complex. I would like to AT LEAST see this sort of thing in EVERY mobo review. There is pretty much no excuse for not including that in a review.
  • domboy - Monday, December 1, 2014 - link

    $476-$650? Ouch... that at least used to be the price range for a dual-socket board.
  • Antronman - Monday, December 8, 2014 - link

    http://www.newegg.com/Product/Product.aspx?Item=N8...

    Dual sockets are even cheaper than that, these days.
  • eanazag - Tuesday, December 9, 2014 - link

    X99 board prices are ridiculous.

    Yes, you can consider dual socket systems. What you can expect in 2P systems: no overclocking (CPU or memory); Intel Xeon CPUs are lower clocked, but have larger caches for more money; very basic audio (no 5.1 or 7.1 possible) or no audio; Xeon CPUs come with no heatsink/fan; may not support SLI and CF, yet have multiple slots; no WiFi; M.2 support might be tough to find; for gaming a $300 Haswell CPU will perform better. You're getting a crazy amount of threads to play with designed to run 24/7, yet thread scaling in most apps won't help you out. You'll need Windows 8.x Pro to use the second socket. 8.x Home only supports 1 socket.

    So if you wanted to medicore game and fold at home and GPU mine and run a NAS and encode some movies at the same time, then a 2P system makes sense.

Log in

Don't have an account? Sign up now