AnandTech Storage Bench 2011 - Light Workload

Our new light workload actually has more write operations than read operations. The split is as follows: 372,630 reads and 459,709 writes. The relatively close read/write ratio does better mimic a typical light workload (although even lighter workloads would be far more read centric).

The I/O breakdown is similar to the heavy workload at small IOs, however you'll notice that there are far fewer large IO transfers:

AnandTech Storage Bench 2011 - Light Workload IO Breakdown
IO Size % of Total
4KB 27%
16KB 8%
32KB 6%
64KB 5%

Despite the reduction in large IOs, over 60% of all operations are perfectly sequential. Average queue depth is a lighter 2.2029 IOs.

Light Workload 2011 - Average Data Rate

Under more typical desktop usage models the Vertex 3 is the fastest, but not by a huge margin. The Agility 3 and Intel SSD 510 are both within 10%. The major advantage for OCZ here is in read performance, which is what you do most of the time with a desktop (non-file archival) workload:

Light Workload 2011 - Average Read Speed

Light Workload 2011 - Average Write Speed

Write performance is clearly not one of the Vertex 3's strong points, at least compared to the 510 and Corsair P3 - both of which deliver top notch performance here. Despite using identical controllers, there is a tangible performance difference between these two drives.

Light Workload 2011 - Disk Busy Time

Light Workload 2011 - Disk Busy Time (Reads)

Light Workload 2011 - Disk Busy Time (Writes)

AnandTech Storage Bench 2011 - Heavy Workload AS-SSD Incompressible Sequential Performance
Comments Locked

68 Comments

View All Comments

  • johan851 - Tuesday, June 7, 2011 - link

    I've been wanting a comparison like this for a couple of weeks now, and I'm really glad you provided one. Thanks!
  • Oxford Guy - Thursday, June 9, 2011 - link

    Now if we could get a review with the 240 GB Vertex 2.

    That has been as low as $309 AR at MicroCenter. Yet, despite being able to be found for low prices ($350 AR lately), it's still nowhere to be found in reviews here.
  • shamans33 - Tuesday, June 7, 2011 - link

    I just bought one for $220 before a $20 MIR about 2 weeks ago.

    Furthermore, your OCZ Agility 3 price is more expensive than the OCZ Vertex 3 price.....

    Might want to look into getting pricing from a variety of vendors.
  • Anand Lal Shimpi - Tuesday, June 7, 2011 - link

    Updated :)
  • aegisofrime - Tuesday, June 7, 2011 - link

    You updated the price but not the price per GB. :p

    I haven't had time to read through the whole article as I have to sleep now, so forgive me if my following question was addressed in the article. I'm considering a 120GB Intel 320, and I'm wondering will performance be lower than the 160GB version?
  • cactusdog - Wednesday, June 8, 2011 - link

    Why no Corsair force 3 drives? Or mushkin Chronos
  • Fallen Kell - Wednesday, June 8, 2011 - link

    They were all just recalled, that is why.

    http://forum.corsair.com/v3/showthread.php?t=95825
  • Shadowmaster625 - Tuesday, June 7, 2011 - link

    No wonder intel was in no hurry with sata6. Half a watt extra power consumption at idle? Will that be the same for notebooks and tablets? If so then that is a serious problem. Why would power consumption be different at idle anyway?
  • imaheadcase - Tuesday, June 7, 2011 - link

    I read sometime back that intel drives performance might suffer simply because of power issues itself. Nothing bad mind you, just that its standby mode interferes with transferring data somewhat. Not sure if thats a firmware or just config error.
  • Jaybus - Friday, June 10, 2011 - link

    Because, even though sata6 has improved power management, the higher clock rate simply requires more power. Even at idle, there has to be some communication between the SSD and the SATA host controller. Primarily, it is up to the OS to put the SATA link into sleep mode. In general, sata6 will always use more power than sata3, since you can't get around the physics. Clocking faster requires either more power or a complete paradigm shift to an optical PHY.

Log in

Don't have an account? Sign up now