Antec TruePower New Internals

As promised all the caps come from Japan (Nippon Chemi-Con), even if the main cap is just an 85°C @ 2000h device. The EMI filtering is large and includes an MOV. There are shrink tubings on all the wires and the soldering quality is adequate if not great.

The design looks like a Seasonic M12 plus the DC-to-DC PCB from the M12D. DC-to-DC is the reason there is so much power on the +12V rails, since they feed the smaller ones. Remember that Antec is using a PWM-fan, so you can see four small wires on the right side.

Antec TruePower New TP-550 Antec Voltage Regulation and Quality
Comments Locked

82 Comments

View All Comments

  • MrSpadge - Thursday, October 28, 2010 - link

    I know your plan was not to privde full market coverage.. but still, if an PSU as expensive as the Antect is included, which still gets "only" 80+ Bronze, it would have been nice to see a 80+ Gold heavy hitter like the Enermax 87+ or Seasonic X series included. In my opinion they're as good as ~500W PSUs currently get.

    MrS
  • EnzoFX - Thursday, October 28, 2010 - link

    I really can't see a reason to turning to budget PSU's when there are often great ones on sale.

    For example, the Corsair 400 W one, every now and then, goes for $20 AR. Antec has a similar offering, at similar price, the EarthWatts 430W I believe. In higher range, another great example: The Corsair 650 TX for around $65 AR. In regards to my personal preference, all of these are known to be very quiet.

    Granted, you do have to wait for the good pricing, but I consider it to happen often enough to simply pick one up when they do and have a spare ready. I suppose if you really can't wait, then you'd have to consider the other brands.
  • adrien_n - Thursday, October 28, 2010 - link

    I've bought a Corsair CX400 PSU and it's efficient, silent, stable and it around 40 EUR I think.

    Bought it after reading about it on http://www.canardpc.com/dossier-36-450-Corsair_CX_... (french) (the whole article is a worthy read if you understand french). It's rated at 400W but if you sum up the powers, you get over 500W.
  • Stas - Friday, October 29, 2010 - link

    I will always stand by Corsair PSUs. The PSU in my rig, CMPSU-520HX, has been reliable for 3 years. Outlived everything else in my machine (3 video cards, 2 CPUs, dozen of HDDs, 3 mobos, even 3 cases lol). Granted I buy quality parts or don't buy any at all, so none of those pieces actually died on me (except a 4 y.o. Hitachi HDD). I've also put in about 15 of Corsair PSUs in clients' rigs (from 400 to 850W versions, multi-12V-rails and single) in the past year and a half. Not a single one died or caused any instability. All are dead silent, too. Corsair's PSUs has become a standard in my eyes. Yes, there are more efficient offerings but they cost in the upper 100s and mid 200s. Between $50 and $150, I don't even think about what PSU to get, I just approximate the consumption and through the appropriate Corsair in the cart.
  • chrnochime - Friday, October 29, 2010 - link

    Well they either use CWT or Seasonic, so they're reliable because of these companies. IIRC they don't have any PSU that's specifically made *by* their own factory, all of their PSU are rebranded ones.
  • strikeback03 - Monday, November 1, 2010 - link

    Well, that is the case with most PSUs though. Corsair does pick good ODM designs and specify good components for the builds.
  • HollyDOL - Tuesday, November 2, 2010 - link

    I am very happy with Corsair PSUs as well and can only recommend... high efficiency, silent, very good current stability...
  • gusc3669 - Thursday, October 28, 2010 - link

    On page 1 under the Techsolo Black Mamba STP-550 I know that this PSU didn't perform but...

    "It just keeps getting better! This PSU is not available in the US, but it's still a nice representative of the crap-section."
  • Mr Perfect - Thursday, October 28, 2010 - link

    Every once in a while it's good to call out the low end products like that Mamba, especially when it comes to PSUs. There are so many people who buy horribly cheap PSUs, or get one bundled with a case, and then see their whole machine go up in smoke. Which might actually make this more important the testing good supplies...

    It would also be helpful to explain some of the features and components of the supplies though. I imagine there are quite a few people who don't know what things like PFC are, or even that it existed.
  • Calin - Friday, October 29, 2010 - link

    Reading only reviews from decent and high quality power supplies will suggest to the reader that all power supplies are decent or high quality. Good to know (at least every once in a while) that a certain power supply did blew up at not more than half the supposed load

Log in

Don't have an account? Sign up now