Overclocking

Like the rest of the Clarkdale line, the Pentium G6950 overclocks extremely well.

At 1.400V with the stock cooler I managed to get this chip all the way up to 4.424GHz, stable. At 1.400V that's a 40% increase over its stock voltage, at which point all power efficiencies go out the door - but there is room in between if you want to get some more performance out of this chip without pushing power consumption too high.

Power Consumption Final Words
Comments Locked

70 Comments

View All Comments

  • Teloy - Friday, March 26, 2010 - link

    "It's GPU still only runs at 733MHz though"... "It's" is not quite right... Take care.
  • 8steve8 - Thursday, March 25, 2010 - link

    why was the G45 omitted on pg2 in the graph of power consumption under load with integrated graphics?

    I was keen to see how much more efficient HD graphics were than g45.

    -stephen
  • bpdski - Thursday, March 25, 2010 - link

    It would have been nice to see the benchmarks run with the overclocked G6950 also.

    - Brian
  • Taft12 - Thursday, March 25, 2010 - link

    I have a hard time comprehending what Intel/AMD's TDP ratings mean in light of the "Load Power Consumption" graph.

    How is it that Intel CPUs with higher TDP ratings consume MUCH LESS power at load than AMD CPUs with lower TDP ratings. Just looks at the results -- all of the Intel core i3/5 CPUs are 73W TDP but the Athlon X2 255 is rated at 65W yet consumes 20 more watts at load. Is the 790FX motherboard that inefficient? WTF???

    Lower idle consumption for Intel I understand due to the smaller process and excellent design, but do the TDP ratings truly mean nothing? This is a disastrous result for AMD.
  • strikeback03 - Friday, March 26, 2010 - link

    Both companies rate their TDP differently, and in either case it is not designed to be a measure of power consumption.
  • Nickel020 - Thursday, March 25, 2010 - link

    It would be nice if you could include the 661 in the power consumption charts. Does its higher TDP actually lead to higehr power consumption?
  • Sunburn74 - Thursday, March 25, 2010 - link

    If you're gonna talk about the value of a 4.4 ghz overclocked processor, you gotta include it the benchmarks. Duh!
  • crochat - Thursday, March 25, 2010 - link

    Why the hell is it necessary to always put discrete graphics card in systems with integrated graphics and do power consumption tests with it? Is the benchmark used for power independent from the graphics card?

    I understand that it is much simpler to measure watts only, but what is important is the resulting task energy consumption, taking into account the efficiency of the processor..
  • strikeback03 - Friday, March 26, 2010 - link

    Because some of the tested systems don't have integrated graphics. So for the application performance comparisons shown to be valid, the discrete GPU has to be kept in there. Wouldn't want someone thinking they could get 69.1 FPS in Crysis Warhead with the power consumption of only the integrated graphics.
  • Taft12 - Thursday, March 25, 2010 - link

    It's necessary to save many hours of work the testers could spend on more articles. What counts is the delta in power consumption between CPUs/platforms at idle and load.

    I'm an AMD fan, but the bottom line is Intel systems are more power efficient, period.

Log in

Don't have an account? Sign up now