ATI HD 5870 Scaling Performance: X58 vs P55 Showdown
by Gary Key on September 29, 2009 12:00 PM EST- Posted in
- Motherboards
Resident Evil 5
We utilize FRAPs to track minimum and average frame rates using the Fixed benchmark in Resident Evil 5. The median test score out of five benchmark sessions is used for the reported results.
Once again, our single card results at x8 are trailing the x16 results, even when overclocked. Minimum frame rates are about 3% better on the X58 platform at both stock and overclocked settings than the P55. The P55 holds a slight advantage when overclocked in average frame rates and trails by 1% at stock speeds.
Resident Evil 5 CrossFire Scaling – Average Frame Rates
| ATI HD 5870 CF Scaling | Resident Evil 5 | Resident Evil 5 4.2GHz |
| Intel Core i7 920 (X58) | 16.4% | 49.3% |
| Intel Core i7 860 (P55) | 17.5% | 47.1% |
At stock speeds, the P55 has a 1% scaling advantage over the X58 but trails over 2% when overclocked.
Resident Evil 5 CrossFire Scaling – Minimum Frame Rates
| ATI HD 5870 CF Scaling | Resident Evil 5 | Resident Evil 5 4.2GHz |
| Intel Core i7 920 (X58) | 20.9% | 67.8% |
| Intel Core i7 860 (P55) | 26.2% | 65.5% |
Minimum frame rates favor the P55 in our stock clock speed results by about 5%, but trail the X58 around 2% when overclocked.
Company of Heroes - Tales of Valor
We utilize FRAPs once again to track a custom demo in one of our favorite RTS titles.
The single card results at x8 is trailing the x16 results by 3% at stock and 1% when overclocked. Minimum frame rates are less than 1% better on the X58 platform at both stock and overclocked settings than the P55 while average frame rates are up to 2% better.
CoH: Tales of Valor CrossFire Scaling – Average Frame Rates
| ATI HD 5870 CF Scaling | CoH: Tales of Valor | CoH: Tales of Valor 4.2GHz |
| Intel Core i7 920 (X58) | 28.1% | 41.8% |
| Intel Core i7 860 (P55) | 21.1% | 44.9% |
At stock speeds, the X58 has a 7% scaling advantage over the P55 but trails almost 3% when overclocked.
CoH: Tales of Valor CrossFire Scaling – Minimum Frame Rates
| ATI HD 5870 CF Scaling | CoH: Tales of Valor | CoH: Tales of Valor 4.2GHz |
| Intel Core i7 920 (X58) | 19.5% | 59.7% |
| Intel Core i7 860 (P55) | 14.8% | 55.3% |
Minimum frame rates favor the X58 in our stock clock speed results by about 5% and right over 2% when overclocked. We did not note any differences in actual game play.
Facebook
Twitter
RSS
85 Comments
View All Comments
flade - Friday, January 15, 2010 - link
I only stick a coputer together every several years so I have to do a lot of fast-track learning in order to keep up with the new razzamataz. Don't get me wrong, I've been fiddling with them since before the first Apples fell off the trees. Probably have more pounds of computer crap in my closet than anybody.Now ignoring all the BS from these idiots trying to sell sneakers - I have to say that I ran out of steam somewhere in the middle of the 55 vs x58 and the Lynfield vs the Bloomfield family fued... Like some of you folks waste a whole lot of time bickering about who has the biggest IQ - or wingie. Yeah, well my dual-barreled, high-lift cam crankin hemi under glass will blow your doors off.
This is a good site. Why don't you friggen macho clowns restrict the chatter to the subject instead of comparing your gizmos.
maomao0000 - Sunday, October 11, 2009 - link
http://www.myyshop.com">http://www.myyshop.comQuality is our Dignity; Service is our Lift.
Myyshop.com commodity is credit guarantee, you can rest assured of purchase, myyshop will
provide service for you all, welcome to myyshop.com
Air Jordan 7 Retro Size 10 Blk/Red Raptor - $34
100% Authentic Brand New in Box DS Air Jordan 7 Retro Raptor colorway
Never Worn, only been tried on the day I bought them back in 2002
$35Firm; no trades
http://www.myyshop.com/productlist.asp?id=s14">http://www.myyshop.com/productlist.asp?id=s14 (Jordan)
http://www.myyshop.com/productlist.asp?id=s29">http://www.myyshop.com/productlist.asp?id=s29 (Nike shox)
AndyKH - Sunday, October 4, 2009 - link
I'm a bit confused about the uncore clock frequency. From what I've gathered from all the discussion about the Lynfield having an advantage from the 200 MHz higher uncore clock frequency, I've concluded that uncore clock is represented by the NB (North Bridge?) frequency in the CPU-Z screenshots. But when running at stock speeds, I can't get it to match for the bloomfield: For Lynnfield CPU-Z shows 2.4 GHz NB frequency, but for bloomfield it shows ~3.3 GHz NB frequency! However, according to one of the original articles http://www.anandtech.com/cpuchipsets/showdoc.aspx?...">http://www.anandtech.com/cpuchipsets/showdoc.aspx?... (can't get the http link button to work) about Nehalem, the uncore clock should run at 20x the BCLK ~2.66 GHz.So how does all this come together?
Is the NB frequency really the uncore clock?
And what about the QPI clock number for Lynnfield, why is that even shown - doesn't Lynnfield completely lack a QPI link, or is the QPI clock used for anything else than actual QPI interface?
A comment to Gary: I really enjoyed reading the article, but (and this might just show my ignorance because I haven't read every article about the Nehalem architecture) I would really appreciate some kind of walkthrough of the numbers shown by CPU-Z and Everest, where it is explained how the naming of different values relate to the names used in articles about CPU architecture.
Thanks in advance
duploxxx - Friday, October 2, 2009 - link
Really nice testing and effort, but the only way to make such a compare complete is to really use all possible solutions, by adding a 790fx platform you would have brought some real value to all customers and finally get rid of all the possible biased/brand favor comments most sites (and so does anandtech) get all the time.Gary Key - Friday, October 2, 2009 - link
That is coming... :)blindbox - Thursday, October 22, 2009 - link
Hearing that makes me give you a two thumbs up in real life :)We are still waiting for a better commenting system. I mean, I can't even see my past comments. Can't you integrate with the forums like how TPU did?
mapesdhs - Thursday, October 1, 2009 - link
Gary, do you know if there are plans to release a pro equivalent of
these cards, ie. FireGL or somesuch? I've spent quite a lot of time
recently helping various places go through purchases of dual quad-core
i7 XEON systems with FX5800 cards. In every case, the overall focus of
GPU support from the supplier was on Quadro FX cards, eg. SGI's new
Octane III doesn't mention ATI FireGL cards at all:
http://www.sgi.com/products/servers/octaneIII/grap...">http://www.sgi.com/products/servers/octaneIII/grap...
What has happened to AMD's professional GPU range? Have they given up?
Ian.
Gary Key - Thursday, October 1, 2009 - link
Ian,I am waiting on an answer from AMD right now. I heard they would have a new line of Professional cards based on Cypress in Q1, just wanting them to confirm it again. Email me and I can answer you once I have the answer.
:)
atmos - Wednesday, October 7, 2009 - link
Did you hear back on why the ATI folks think the results are so different from the tests with the Nvidia 260 etc cards?capeli - Wednesday, September 30, 2009 - link
The results are not surprising. Given that the 5870 performs roughly at the level of a 4870x2 it's not surprising that the scaling is more or less the same the 4800 series.I'm guessing that Lynfield will start to become a bottleneck with the 5870x2 quadfire/trifire (5870x2 + 5870) setups.
Personally I went for Bloomfield, because I had great success with my 4870x2 + 4870 setup. Had heat issues that were resolved by adding a better fan to my intake on the side panel. It's a tad noisy, but the performance is superb. So much so that I don't see myself upgrading to DX11 until mid 2010.
18 months of top notch performance is pretty good for fast moving tech like graphics cards.