Silicon Optix HD HQV

The HD HQV benchmark is developed and provided by Silicon Optix. Our review of HD HQV is located here. Like the standard HQV Benchmark, the high-definition counterpart contains video tests and patterns that determine the quality of a product’s HD video signal processing. A set of five tests evaluate quality factors such as HD Noise Reduction, Video and Film resolution loss tests, as well a test for “jaggies”. We disable Aero capability and set the driver options to optimal settings.

Unfortunately, optimizing the drivers and PowerDVD 7.3 can and will make a difference in the tests where de-interlacing is important. In addition, although this test is standardized to some degree, it can be subjective at times. This depends upon how strict you abide by the guideline sheet although even it differs at times with the video example tests.


In our first test, it is obvious that Image quality of the Intel G35 and NVIDIA GeForce 8200 is not up to par with the 780G with the Film Resolution test making the difference in the scores. To be honest, the 780G was on the verge of failing this particular test (subjective opinion) without optimizing the settings in the CCC panel. We also optimized quality settings in both the NVIDIA and Intel control panels to be consistent but did not notice any real changes in this test. All three boards were close to scoring 7 points in the HD noise reduction test but failed the flower section of the test while the sailboat test did show some slight improvements.

AMD is working on further enhancements in the Catalyst 8.4 drivers for the X2 processors to improve this situation and the jaggies test. With a Phenom installed, we see the advantages of the post-processing engine coming into play. Additional tuning is also available in the 8.3 drivers with the ability to turn edge enhancement off and on. We will have the standard HQV results in our roundup. The 8.3 drivers allow the 780G with a Phenom to score 122 out of 130 points and 113 with the 4850e.

Overall, we do not put much faith into this test currently as our eight person panel seemed to have a different opinion on just about every score. In fact, only three of our esteemed colleagues were in agreement with each other on test scores for each board and those were different (higher) than our published results.

Da Setup... Operation SWORDFISH
Comments Locked

49 Comments

View All Comments

  • greenfuzion - Thursday, April 17, 2008 - link

    http://www.youtube.com/watch?v=_l2e0mf3CcA">http://www.youtube.com/watch?v=_l2e0mf3CcA
  • Schugy - Tuesday, March 11, 2008 - link

    The new AMD chipset is a good choice for a MythTV frontend and it will play normal mpeg2 tv flawlessly.
    But I won't need any HD capabilities because video players like kaffeine or mplayer won't support HDCP crap or any hardware accelleration.
    With the lousy closed source nVIDIA linux driver not supporting pureview I can't even watch the unencrypted EA Burnout Paradise demo video fullscreen (VIDEO: [avc1] 1280x720 24bpp) without any performance problems. But I think a Sempron 3000+ SOA and a 7600GT should be enough for this resolution far away from full HD.
    I won't spend any money for HD hardware or HD content because there's no sense in it.

  • najames - Tuesday, March 11, 2008 - link

    Since these boards are intended as media PCs, I think you should be doing thorough testing of the onboard LAN. My Biostar TA690G does a decent job on gigabit, my Gigabyte GA-MA69GM-S2H sucked at sending, ok in receiving. Intel Pro1000 PCI-e x1 replacement card did a lot better on the Gigabyte, although I still question the boards throughput. I have done a LOT of LAN testing on Linux for a building server. This kind of stuff needs to be checked, writing to a single WD 640GB drive.

    ftp> put mint.iso
    local: mint.iso remote: mint.iso
    200 PORT command successful. Consider using PASV.
    150 Ok to send data.
    226 File receive OK.
    722104320 bytes sent in 6.41 secs (109965.8 kB/s)
    ftp> quit
  • yehuda - Wednesday, March 12, 2008 - link

    Gigabyte's 690G and 690V boards suck at network performance because they use a PCI controller as upposed to a PCI Express controller in most other boards.

    Fortunately, the GA-MA78GM-S2H is free from this drawback. You can check the network results here:
    http://www.techreport.com/articles.x/14261/13">http://www.techreport.com/articles.x/14261/13

    That said, I can't explain your comment on questionable throughput with the replacement PCI-e card.
  • rhofmann - Tuesday, March 11, 2008 - link

    1080p HD decode is great, but in my experience I've found that the de-interlacing required by 1080i broadcast HD content has been an Achilles heel for HTPC output with integrated graphics.
  • jamawass - Tuesday, March 11, 2008 - link

    Never thought I'd see the day when Tomshardware actually published a better review than Anandtech. I don't understand how a review article on AMD 780g ends with a paragraph on an Intel chipset talking about strengths in"office applications", heck a igp chipset 10 yrs ago was good in office applications.
    This is the best IGP chipset currently and the article should have stated that categorically instead of using lame " AMD got it almost right". What use is lpcm audio when the image is paused and juddering on your screen?
    Power consumption, sound use are all relevant when reviewing a platform like this I just didn't see the empahsis on these in this article.
  • TheJian - Tuesday, March 11, 2008 - link

    I was surprised by TomsHardware too. I haven't put much stock in their site for years (since a ways before they soldout). In the beginning Tom Pabst did an excellent job HIMSELF. But now it's just his name on the site. I expected to read their review over here, and Anandtech's review over at Toms...LOL. Maybe I'll have to start paying more attention to Toms. Jeez, did I say that out loud? Or am I just thinking it... :)

    Toms review was definitely shooting straight. Totally agree that Audio (any kind not just over HDMI) can't get me to lean towards Intel if the picture sucks to begin with. What's the point in Hi-Def if it looks like crap? OH wait...That's right it still sounds good! LOL. Whatever...
  • gochichi - Tuesday, March 11, 2008 - link

    Refurbished Dell Vostro 400 desktop with a superior Intel Quad chip, Vista Home Premium, 2GB RAM (upgradeable), 160GB HDD, DVD+/-, 8300 GS (which should do just about as well, very very close I imagine), keyboard, mouse and some sense of synergy. Meaning, you get a keyb/mouse/case that match in some way... even if the thing is not particularly small, it's pretty small and high quality looking than most reasonably priced cases.

    Heck, forget price, only a few cases are passable PERIOD. Vista's pricing even the so-called "OEM" price really messes things up also.

    The Vostro mentioned above, which would outperform any Phenom is $459.00 ready to go... already assembled, perfect matches etc.

    Before you ask me... why don't I just buy it if I like the deal so much? I just might, I just might is the answer.
  • Zstream - Tuesday, March 11, 2008 - link

    Utter rubish! A Vostro 400 huh?

    Lets go to dell's site. A Vostro 400 with Intel® Core™2 Duo Proc E4500 (2.20GHz, 2MB L2 Cache, 800FSB), one gig of ram, dvd-rom, 160gb hard drive...

    I would purchase a 780g/tri-core htpc over this any day of the week.
  • gochichi - Tuesday, March 11, 2008 - link

    Did you ever consider that you can't find the unit I'm talking about anymore.

    I said nothing about a 2.2Ghz Duo anything. I was talking about a QUAD 2.4 Ghz with a small HDD, 2GB of RAM and a remedial video card (that would perform about as well as the 780G, maybe a little better it was a 8300 GS).

    Dell WAS selling 2.4Ghz quad refurbs as duos... but I don't know if that's changed.

    All of this is really irrelevant. I guess the broader point is that building a computer from scratch blows for a number of reasons (unless you're really going to spend in top end stuff).

    1. Getting a decent case/PSU for under $100.00 is a feat, and even then it's too much.
    2. Vista or any other MS system is over priced.

    About the 780G, my first reaction was: "it's only $70.00" and I started going from there. But you know what? At the end of the day, you're really saving $30.00 on what a remedial 8400 GS would cost. $30.00 when you're building from scratch just isn't that much. AMD has provided a decent part for OEMs though. Hopefully they can deliver.

    As for the Vostro 400 w/ Quad and Vista Home Premium for $469.00 hopefully I'll be able to find it again and buy it. $40.00 upgrades it to 4GB of RAM and you can actually put any video card you want in that thing (just one though obviously). So 9600GT down the line, or wait it out and get something next gen.

    Part of the advantage of building from scratch is overclocking. But no matter how much you overclock a Phenom, it's still pretty much not as good as a basic 2.4Ghz intel Quad. Those things have been around forever. Intel is totally yawning as they pummel AMD. Overclocking also means even pricier parts and headache and I'm just not seeing how you could possibly beat the bang/$ of the Vostro.

    Now, that's me. You want to build a system based AMD and this chipset, it sounds like fun... but it doesn't sound smart.




Log in

Don't have an account? Sign up now