Write Tests

How else would we gauge a group of DVD burners if not by their write performance? We have compiled our results from the benchmarks that we have performed with a few types of media to which these drives are capable of writing.

80min CDR Write Speeds

As we begin to move into the realm of DVDs, we tend to forget about how each DVD burner will handle CDR media. Our results show that all of the drives can burn CDR media above an average of 29X speeds with exception to the DVR-108D which averaged a 24.95X write. The NEC ND-3500A tops out at slightly above the 36X mark to take the CDR charts.

The focus of our 16X roundup ultimately hinges on DVD write speed and quality.

MCC 02RG20 DVD-R 8x Write Speeds

Here again, the ND-3500A tops the charts by writing to the Mitsubishi 8x DVD-R media at an average of 10.22x speeds. LiteOn is left behind at the end of the list with an average writing speed of 6.04x.

MCC 003 DVD+R 8x DVD-R Write Speeds

Pioneer has the MCC 003 media in its grasp as it burns a complete Mitsubishi DVD+R, which is rated at 8x speeds, at an average actual speed of 10.01X. Let's see how it does with the Ritek media.

Ritek G05 DVD-R 8x Write Speeds

We expected the both the 108D and the ND-3500A to perform better on the Ritek media, but as the graphs show, they broke the 8x barrier, but not quickly enough to bring the average write speed above 8x. Sony's DRU-710A just barely made it to second to last while the first place position was taken, for this media, by LG's GSA-4160B at an average of 7.81X.

Read Tests/Seek Times Write Tests (cont'd)
Comments Locked

65 Comments

View All Comments

  • kellvarsen - Friday, November 26, 2004 - link

    I would like to congrtulate the Anandtech team for this DVD-RW roundup as they prooved once more that they are better and more thorough with the testing than Tomshardware.And by this i am reffering to the writing quality test mainly ,which in my opinion is the most important and eloquent of them all.Great HL2 review also!!!
  • Tabajara - Tuesday, November 16, 2004 - link

    I've heard several people say that the new Plextor 716A drives are defective, and are mostly burning DVD coasters, specially dual layer ones. Pioneer Europe isn't selling them yet, and this also point to some kind of manufacturing problem. I was waiting for this drive, but now I don't know if I will buy a NEC or a Pioneer one. I would buy the DVR-108 if a new firmware version enables the user the choose the booktype to be used.
  • JaRb0y - Thursday, November 4, 2004 - link

    Curious, did you get the NEC 3500AG to write Fujifilm 48X CDR media at 48X? It appears you did, but I heard NEC limited the speed on some types. My drive does 32X on the Fujifilm TY, am I missing something?
  • DonB - Thursday, November 4, 2004 - link

    "ND-3500A is priced $10 lower than Pioneer's DVR-108D at $68" Prices are really coming down. I bought the same NEC 3500A just a few months ago for $95 + shipping (from NewEgg).
  • eleewhm - Wednesday, November 3, 2004 - link

    you guys sure know how to review dvd writers???
    looks like you are good at opening up the drives only

    Since when does NEC 3500 overdrive MCC003?????? 6:72??...it only writes @8x speeds....

    pls relook at the way you guys post the results...and understand nero numbers before publishing the article...

    see how ppl are thrashing you guys here in singapore...we have a bunch of serious ppl here doing testing ...

    http://forums.hardwarezone.com/showthread.php?p=11...


  • Maverick215 - Wednesday, November 3, 2004 - link


    >NEC follows a pattern for each firmware revision: 2.xy, where:
    >
    >X = Type (Retail, OEM, Rebadge)
    >Y = Revision number
    >
    >Till today know patterns:
    >
    >X = 0 (OEM)
    >X = 1 (Retail)
    >X = 2 (I-O Data)
    >X = 4 (Freecom)
    >X = 7 (TDK)
    >X = B (Ricoh)
    >X = F (MadDog)
    >----------------------
    >Y = 6
    >Y = 7
    >Y = 8
    So what 2.26 really represents is the same generation of firmware with feature tweaks from an oem that rebadged the drive. The firmware wasn't released for the "retail" drive. We must distinguish OEM from rebadge now. OEM in the more "traditional" is a drive intended for resale, such as in a system(this is what you'll find at newegg and similar being sold as NEC). OEM rebadge would be a drive intended to be sold by another company with that company's logo etc if they desire, the insides of all these drives could very well be exactly the same, and often times are, since this saves the OEM a great deal of money. At most you'll get different revisions of the same line. (On the flip side you'll see companies such as HP that buy 16x drives from whoever is the cheapest, so Lite-On one month and BenQ the next)
    --
    NEC does have more support than just the "official" there are several "hacked" firmwares
    that provide all kinds of features not in the official releases(bitsetting included), though I think they go beyond the scope of what you were trying to portray.
    --
    So, more fairly you would represent that the drive being OEM(system) might come with a 2.x7 firmware most likely 2.17(see above). An important distinction. Since this would seem to give this drive the same flaw as the pioneer (bitsetting only in DL) that disqualified itfrom winning..
    But, I still don't need dvd-ram :)
    Picking and chosing features from untested firmware and not doing the same from another drive has introduced a clear bias(bias in a scientific sense, which is information/data which skews the results of your study/review due to a sytematic error in your study/review design; I am NOT implying you have a bias to one product or another) in the selection of the winner.
    ==
    as an aside, further confirmation that my assumption about the nutech drives is correct
    email correspondence with Chris Geerlings,
    Field Application Engineer from nutech I inquired to using any of the firmwares from the benq ftp. And he wrote back:
    "I know the (G7)K9 works, the others I haven't tested yet."
  • asteamerandy - Tuesday, November 2, 2004 - link

    In you review:

    "If LG had implemented bitsetting into their GSA-4160B, it would have helped their product climb the ladder ..."

    "The booktype setting feature offered in this unit also makes this a great drive. The GSA-4160B is a bit on the steep side ..."

    There are other instances if this abuigity. So which is it? Does the 4160B have the bit setting feature or not?
  • rcabor - Tuesday, November 2, 2004 - link

    Why do you say "DVDR burn speeds are excellent, and the drive technically supports 4X DVD+DL burn speeds, even though it does not readily advertise such. You can see our original DL tests on the drive here." But then right below that you show an image of the box that Advertises 4x DVD+R dual layer?
  • rcabor - Tuesday, November 2, 2004 - link

  • Maverick215 - Tuesday, November 2, 2004 - link

    Still not working, short story=NEC 2.26=2.16 with tweaks to rebadge specifications. they do not follow traditional revision codes 2.x6=are all same

Log in

Don't have an account? Sign up now