Western Digital this week introduced its new Ultrastar DC HC620 family of hard drives that consists of 14 TB and 15 TB models. The HDDs use shingled magnetic recording (SMR) technology and are aimed at applications that need a lot of storage space, but are mainly read-focused operations. The manufacturer will only sell these products to customers with software that can manage SMR hard drives, primarily to those who already run 10 TB or 12 TB SMR HDDs.

The HGST Ultrastar DC HC620 hard drives are based on Western Digital’s fourth-generation HelioSeal helium-filled enterprise platform that packs eight platters and employing multiple enhancements of internal components specially designed to improve reliability and durability of HDDs working in vibrating multi-drive environments. The DC HC620 HDDs use eight SMR platters with a 1.75 TB and a 1.875 TB capacity featuring a 1034 and a 1108 Gbit areal density per square inch respectively. Because of a very high areal density, the 14 TB version of the drive offers up to 233 MB/s sequential read/write speed, whereas the 15 TB variant can hit 255 MB/s sequential read/write speed, which is the world record for any SMR HDD.

Keep in mind though how SMR technology works - it records new magnetic tracks partly overlapping the previously recorded tracks in a 'shingle roof tile' fashion. This method is appropriate for sequential writes, but as multiple tracks need to be adjusted when re-writes occur, it slows down the rewriting process. As a result, SMR-based HDDs are good enough for archive as well as write once read many (WORM) applications (think content delivery services), but is not suitable for typical server or enterprise workloads. Another thing to point out about high-capacity HDDs in general and Western Digital’s Ultrastar DC HC620 15 TB in particular is the fact that as capacities increase, IOPS per TB performance drops and it gets increasingly harder for operators of datacenters to guarantee their customers expected performance and quality of service. Therefore, while technically the Western Digital’s 15 TB is the world’s highest-capacity hard drive that exists today, it is necessary to understand that this is a very special product aimed at select customers with systems that take into account peculiarities of SMR and can mitigate lower IOPS per TB performance to minimize impact on QoS.

The Ultrastar DC HC620 HDDs feature a 7200 RPM spindle speed, a 512 MB DRAM buffer for indirection table management, a 7.7 ms read seek time, a 12 ms typical seek time, and a 4.16 ms typical latency. The manufacturer will offer the new series of HDDs with a SATA 6 Gbps or with SAS 12 Gbps interface. As for power, the DC HC620 SATA drives consume up to 6.4 W, whereas the DC HC620 SAS HDDs consume up to 8.3 W, which is in line with power consumption of their direct predecessor, the Ultrastar Hs14 (which in case of the 14 TB version of the DC HC620 is the same drive), but significantly lower than prior-generation of SMR HDDs from HGST.

Western Digital Ultrastar DC HC620 General Specifications
  HSH721415ALE6M0
HSH721415ALE6M4
HSH721415ALN6M0
HSH721415ALN6M4
HSH721414ALE6M0
HSH721414ALE6M4
HSH721414ALN6M0
HSH721414ALN6M4
HSH721415AL52M0
HSH721415AL52M4
HSH721415AL42M0
HSH721415AL42M4
HSH721414AL52M0
HSH721414AL52M4
HSH721414AL42M0
HSH721414AL42M4
Capacity 14 TB
15 TB
RPM 7200 RPM
Interface SATA 6 Gbps SAS 12 Gbps
DRAM Cache 512 MB
Format: Sector Sizes 4Kn: 4096
512e: 512
4Kn: 4096, 4112, 4160, 4224
512e: 512, 520, 528
Helium-Filling Yes
Areal Density 14 TB: 1034 Gbit/inch2
15 TB: 1108 Gbit/inch2
Sustained Transfer Rate 14 TB: 233 MB/s
15 TB: 255 MB/s
Average Latency 4.16 ms
Seek Time (read/write) 7.7/12 ms
Acoustics 2.0/3.6 Bels
Power Rating Idle 5.2 W 6.2 W
Operating 6.4 W 8.3 W
MTBF 2.5 million hours
Warranty 5 Years

Like other enterprise-class HDDs, the Ultrastar HC DC620 HDDs are rated for 2.5 million hours MTBF and come with a five-year warranty. Given the fact that the hard drives will only be sold to select customers, Western Digital does not publish per-unit pricing.

Related Reading

Source: Western Digital

POST A COMMENT

18 Comments

View All Comments

  • olafgarten - Friday, October 26, 2018 - link

    What is the difference between the M0 and M4 models? Reply
  • repoman27 - Friday, October 26, 2018 - link

    M = Host-Managed
    0 = Instant Secure Erase support
    4 = Secure Erase support (overwrite only)
    Reply
  • alacard - Friday, October 26, 2018 - link

    0 = Instant Money Support
    4 = Like so, we flipped a bit on 0 to 1, and like now it takes a few days for what flippin' that bit did.
    Meaning, like you pay us, like a ~lil extra~ and we'll like, flip that bit back to 0 for ya.
    Ain't we patron saints?
    Reply
  • Lord of the Bored - Saturday, October 27, 2018 - link

    I really do hate how the modern computer component market works. Reply
  • repoman27 - Sunday, October 28, 2018 - link

    These massive capacity drives tend to be rather expensive, and a single pass overwrite can take > 24 hours. That makes instant secure erase an attractive feature if you deal with customer / confidential / regulated data and want to be able to quickly repurpose a drive instead of just shredding it and shelling out for a new one.

    Instant secure erase is enabled by making the drive self encrypting and just chucking the keys when you issue a SATA secure erase command. However, if anything happens to the controller where those keys are stored you end up with a failed drive and very little possibility of performing data recovery. If the drive is being used for archival of non-sensitive data, customers might prefer to fail-safe rather than fail-secure.

    Could HGST have provided a single SKU along with a firmware tool that allows customers to choose which mode they want? Maybe. But seeing as certain regions also impose regulations on self encrypting drive technology, they may have decided it was easier to just offer two different models.
    Reply
  • alacard - Sunday, October 28, 2018 - link

    That's very interesting. It's always nice to learn something new, thanks. Reply
  • Manch - Tuesday, October 30, 2018 - link

    Are you the son of Dracala?! :D Reply
  • alacard - Tuesday, October 30, 2018 - link

    I think you have me confused with Alucard.
    I'm alacard, son of dracala (a goat herder from Zamunda).
    Reply
  • alacard - Tuesday, October 30, 2018 - link

    (I also have reading comprehension fail, as you can tell from reading my response which came from a misreading of your very clever question about Dracala. Reading comprehension fails happen a lot in Zamunda.) Reply
  • Manch - Friday, November 02, 2018 - link

    LOL, awesome! Reply

Log in

Don't have an account? Sign up now