Glossary

Analog Input — The old fashioned way of connecting monitors to computers, uses a 15 pin cable for most PCs.

ASV — Advanced Super View. A display mode for LCDs.

Cd/m2 — Candela per meter squared. A measure of luminescence.

CRT — cathode ray tube.

Contrast — The difference between light and dark shades.

Contrast Ratio — The measurement between light and dark shades on an LCD.

DLP — Digital light projection — this technology is an evolution of projection and rear projection that may totally replace rear projection TVs in the near future.

D-Sub (15 pin) — The analog connector between the video card and the computer is more properly referred to as the D-Sub 15 pin cable.

DVI — Digital Video Interface. This interface is the preferred connection when dealing with LCDs. These come in three forms: DVI-D, DVI-I and DVI-A. DVI-A is analog signal over DVI; DVI-D is digital over digital; and DVI-I is the most versatile, capable of digital or analog signal.

FFS — Fringe Field Switching, one more LCD Display mode.

Ghosting — The type of signal interference associated with harmonic oscillation over the cable or connector. The result is usually an “echo” of the original image superimposed across the screen.

IPS — In Plane Switching. An LCD display mode.

LCD — Liquid Crystal Display.

Luminescence — The brightness of something, measured in candela per meter squared.

MVA — Multi Domain Vertical Alignment. An advancement on the traditional VA display mode.

Native Resolution — The monitor physically has a certain amount of pixels wide and tall. Typically, this is usually 1280x1024 on larger displays. The native resolution is the resolution your display can handle without any scaling issues.

Nematic phase — The process of twisting liquid crystal substrates to allow or inhibit light to go through.


© VESA



Nits — the improper name for candela per meter squared. (Lumiensnace)

OSD — On Screen Display. The menu for a monitor.

Pixel — The cluster of Red, Green and Blue sub-pixels that create the illusion of a full color spectrum.

PVA — Patterned Vertical Alignment. Another LCD display mode primarily developed by Samsung.

Response Time — The time (in milliseconds) for the pixel to fully untwist and then twist (or go from black to white and back to black). The “rising” (Tr) component is the time from black to white. The “falling” (Tf) component is from white to black.

Scaling — An LCD monitor contains only so many pixels in the display. Therefore, displaying an image that is not the exact same resolution dimensions will result in an image that is skewed and distorted.

Sub-pixel — A single liquid crystal in front of a red, green or blue filter.

Streaking — Similar to ghosting, streaking occurs when interference along the cabling or connectors begins to comp

Substrate — The heart of the LCD. This is the glass sandwich that holds all the transistors and liquid crystals.

TN — Twisted Nematic. An older LCD display mode.

Viewing angle — The measurement that refers to how viewable the screen is at extreme angles. Some manufacturers list angles like 120 degrees, which means 60 degrees left and right. Most simply list values like “70 degrees left and rights.”


Future LCDs Special Thanks
Comments Locked

63 Comments

View All Comments

  • Anonymous User - Friday, October 17, 2003 - link

    I'd just like to bump #60. He asks some great questions - anyone have any answers?

    The 15" laptop 1600x1200 vs 19" desktop version has always bothered me. I wish I could buy my ThinkPad's display as a standalone device!
  • Anonymous User - Monday, September 15, 2003 - link

    Thank you Kristopher for your informative article.

    I have been staring at a computer or TV monitor for over 25 years and between the CRT and aging, my eyes have been getting worst every year. I am interested in getting the best video quality monitor for under $1000 per monitor. After reading your article, I would assume that a CRT would be the best choice. However, I am in the market to purchase TWO monitors. This is so I can view two programs simultaneously or when a client comes over, rotate the second monitor for their viewing. I mostly stare at numbers, words and Internet images. Also, I prefer larger monitors (i.e. 19"+). Should I consider two CRTs, CRT as my primary and LCD as the secondary, or match monitors and save real estate with two LCDs? What models would you recommend?

    Your suggestions are appreciated.
    Michael
  • Anonymous User - Saturday, September 13, 2003 - link

    Also, it seems that marketing is mostly centered on inches instead resolution. A bit too often this is also true for reviews which tend to place things like elegance of design, or number of USB ports or some such, above petty details like displayable desktop area.

    Is this just some braindead carryover from CRTs, or does the average consumer really not care about the number of pixels he gets?
  • Anonymous User - Friday, September 12, 2003 - link

    One thing I'd like to know is why is that usual native resultion for 19" LCDs 1280x1024? Or more specifically, why do 17" and 19" LCDs generally have the same native resolution.

    I would have thought that the logical progression would have been (based on the resultions usually used on equivalent sized CRTs):
    15" 1024x768
    17" 1280x1024
    19" 1600x1200

    But no, you generally have to go up to 21" LCD to get a 1600x1200 native resolution. And it can't be a technical problem, because we have 15" notebook LCDs with 1600x1200 (and higher) resolution.

    So, does anyone know why the LCD industry made the bonehead decision to standardize on having 17" and 19" LCDs have the same native resolution?

    PS. And don't bother pointing out that there are a few 1600x1200 19" LCDs. I'm aware of these exceptions. I just don't understand why this isn't the standard.
  • rapsac - Thursday, September 11, 2003 - link

    #58
    That is anybody's guess. No way to find out unless you buy one and open it up. Then use the panel# to get the specs at the panel manufacturer. (And wave your warranty goodbye like I did mine :( )
  • joramo - Tuesday, September 9, 2003 - link

    Are this 16.7m color specifications true or is the same 18 bits AUO panel?

    ACER AL732 - 17"
    Technical specifications
    Display size 17"
    Display type Active color matrix TFT
    Display area 338 x 270 mm
    Brightness 260 cd/m²
    Resolution 1280 x 1024 pixels
    Colour 16.7m (8-bits per color)
    Pixel pitch 0.264 (H) X 0.264 (W)
    Contrast ratio 450:1
    Response rates Total: 16ms

    Thx

  • KristopherKubicki - Monday, September 8, 2003 - link

    #55: on the contrary, lg.philips actually informed us of the opposite. While technically the dithering does not impact the response time, electrical modulation does. This is a direct result of how many bits the signal is capable of.

    Kristopher
  • Anonymous User - Monday, September 8, 2003 - link

    Are there any formal reviews on new substrates that offer 10-bit gamma correction? In particular, I am considering either the Sharp T1820 or the EIZO L695 (L685EX), and considering that their specs are fairly similar, I assume they are using the same substrate. Supposedly the 10-bit gamma correction is capable of displaying a 1024-step greyscale, which can help prevent banding in subtle gradiants.

    Unfortunately, neither of these LCDs are widely available for me to perform my own eye-testing. Ideally if someone can offer advice on whether this is an overpriced two-step-conversion technology (as with using an analog cable on an LCD), or if this truly offers discernable benifits, that would be great!

    The Sharp T1820:
    http://www.sharpsystems.com/tmplproduct_T1820.asp

    The EIZO L695:
    http://www.eizo.com/products/lcd/l695/contents.htm...

    Also worth noting, EIZO CG18
    http://www.eizo.com/products/lcd/cg18/contents.htm...

    Please email: fhsieh@exeter.edu
    Any information is appreciated!
  • Anonymous User - Monday, September 8, 2003 - link

    ALL TN+film panels use dithering (or Frame Rate Control as they call it) to interpolate 24 bits colors with a 18 bits signal. These panels are either quoted as 262K colors (64³) or 16.2 millions colors (253³). This applies to ALL 15" monitors and almost ALL 17" monitors (including the Samsung model quoted as 16.7 millions in the article). However all 18" and higher monitors use panel driven with a 24 bits value.

    BTW, dithering has absolutely no impact on response time.
  • Anonymous User - Sunday, September 7, 2003 - link

    Info on the Samsung X line fo monitors, in case anyone is interested.

    http://monitor.samsung.de/detail_tft_syncmaster.as...

Log in

Don't have an account? Sign up now