With an eye towards expanding and refreshing their case lineup, Cooler Master has just announced the MasterBox Lite 5 mid-tower case. The Lite 5 is a new model, with a translucent front panel and customizable trim colors. Not to be confused with the MasterCase 5 that we reviewed back in 2015, the MasterBox 5 Lite is the latest variation in the MasterBox 5 series, which now consists of six different models.

The MasterBox Lite 5 is a 43-liter ATX mid-tower design, and This model supports Mini-ITX to ATX motherboards with a total of seven expansion slots. Due to its depth and wide open interior design, this case can handle expansion cards up to 400mm in length, which means that it can easily fit the longest consumer graphics cards on the market. For the CPU cooler, it is worth taking note that, it has a hard z-height limit up to 160mm tall for heatsinks. This doesn't mean much in the grand scheme of what's available for CPU cooling, but the tallest models like the Noctua NH-D15 will unfortunately not fit.

With dimensions of 200mm(W) x 468.8 mm(D) x 454.5 mm(H), the case is quite narrow, relatively deep, and a roughly average height. Surprisingly, for a case made with a combination of steel and plastic, it is reasonably lightweight at 5.07kg. While we are on the topic of dimensions, Cooler Master have included a generous 25mm to 35mm of cable routing room behind the motherboard tray.

Liquid cooling capabilities are aplenty, with support for one 120mm radiator at the back of the case and one 240-360mm radiator (up to 50mm thick without fan) on the front of the case. Speaking of fans, there is one 120mm fan pre-installed in the back of the case, and there is room for three 120mm or two 140mm fans on the front of the case. Dust filters are included on the front and bottom of the case (for the PSU fan). When it comes to connectivity, the front I/O panel has two USB 3.0 ports, as well as both audio in and audio out 3.5mm jacks.

As you can probably see, the interior of the case has been split into two chambers. The enclosed bottom chamber is where the power supply - which can be up to 180mm long - is installed. Although not explicitly mentioned in the available documentation, we strongly believe that the bottom chamber is also where you will find the single 2.5" SSD mount (either there or behind the MB tray) and two combo 2.5"/3.5" drive bays.

Clearly, one of the main marketing points of this model is aesthetics. The centerpiece is the angular front fascia, which Cooler Master calls their DarkMirror front panel. It is a tinted and highly glossy piece of translucent plastic - likely acrylic like the side panel - that is fully removable to help with the installation of any liquid cooling components. The edge-to-edge side panel window is tinted yet highly transparent, fully removable, and held in place with thumbscrews. As with other MasterCase designs, there are also some external customization possibilities thanks to the inclusion of three trim pieces of various colors - black, white, and red - for both the top and bottom part of the front fascia. And if that is not enough, Cooler Master have also made 3D printing schematics of the top and bottom trim available for download so that DIY community can customize this case. 

The Cooler Master MasterBox 5 Lite is currently available for pre-order at Newegg.com for $50 USD with a stated release date of May 19th.

Related Reading

Source: Cooler Master

POST A COMMENT

15 Comments

View All Comments

  • MTDEW - Thursday, May 11, 2017 - link

    I don't even need a case and I'm buying one of these.
    That's a lot of case for the money!
    Reply
  • etamin - Thursday, May 11, 2017 - link

    its an upside down Phanteks P400 Reply
  • slipdisk - Thursday, May 11, 2017 - link

    It's a good deal, but I'm waiting for updates to Cooler Master's Mini ITX cases. What I really want is an Elite 110 that's slightly bigger, to accommodate longer (not necessarily full length) graphics cards. Reply
  • Flunk - Thursday, May 11, 2017 - link

    For $50, this is hard to beat. It's reminiscent of the NZXT S340 in features (but not really style) and that's $70. Reply
  • NARC4457 - Thursday, May 11, 2017 - link

    Does no one use optical drives any longer? I'm literally in the middle of a case choice right now, and I really need a slot for my existing 5.25 Blu Ray drive. Enclosures are expensive, but a new usb 3.0 drive is even more expensive.

    That said, it's pretty funny that I have a MasterCase 5 (referenced above) as my top choice right now. Didn't even know it was reviewed here - off I go to read!
    Reply
  • NARC4457 - Thursday, May 11, 2017 - link

    And a not so favorable review.... sigh. Who knew deciding on a case would be so hard? Reply
  • Ro_Ja - Thursday, May 11, 2017 - link

    Yeah me too. I have been wanting to re-case my rig but most nowadays don't come with a optical drive bay Reply
  • HomeworldFound - Thursday, May 11, 2017 - link

    That's why I chose a corsair cube case, I can still mount a BDXL writer and an Aquaero 6 XT. I stepped down from a Caselabs SM8 with a pedestal though. We're talking W-D-H 290mm x 570mm x 850mm) Reply
  • BrokenCrayons - Friday, May 12, 2017 - link

    If you don't mind mATX cases, Rosewill, Xion, HEC, and DIYPC all a few different models with ROM bays available and they're currently selling for less than $30 on NewEgg. That's the route I'd go if I were still chained to desktops as my computer platforms as a second best option to getting a relatively late model retired Optiplex and just feeding it a bigger PSU.

    Honestly, the case in this article is pretty gigantic anyway. It doesn't do the overstated gamer boy/girl motif which is a refreshing change so there's that, but it does still have a side window so you're going to end up seeing the dust and pet hair the system ingests on a daily basis if there's any lighting inside. Plus you get stuck seeing computer components too unless you orient the case in a way that keeps the windowed side out of line of sight.
    Reply
  • JocPro - Thursday, May 18, 2017 - link

    Positive pressure and a couple of dust filters works wonders, my friend. Reply

Log in

Don't have an account? Sign up now