Though we don't typically cover adapter news, this one is worth a special exception. Late last month Club3D announced their DisplayPort 1.2 to HDMI 2.0 adapter, and since then there has been some confusion over just what their adapter actually supports - a problem brought on by earlier adapters on the market that essentially only supported a subset of the necessary HDMI 2.0 specification. As a result Club3D sent over a second note last week more explicitly calling out what their adapter can do, and that yes, it supports HDMI 2.0 with full 4:4:4 chroma subsampling.

But before we get too far ahead of ourselves, perhaps it's best we start with why these adapters are necessary in the first place. While 4K TVs are becoming increasingly prevalent and cheap, it's only in the last 18 months that the HDMI 2.0 standard has really hit the market, and with it the ability to drive enough bandwidth for full quality uncompressed 4K@60Hz operation. Somewhat frustrating from a PC perspective, PCs have been able to drive 4K displays for some time now, and the de facto PC-centric DisplayPort standard has offered the necessary bandwidth for a few years, since DisplayPort 1.2. However with DisplayPorts almost never appearing on TVs, there have been few good options to drive 4K TVs at both full quality and 60Hz.

An interim solution - and where some of Club3D's promotional headaches come from - has been to use slower HDMI 1.4 signaling to drive these displays, using Chroma Subsampling to reduce the amount of color information presented, and as a result reducing the bandwidth requirements to fit within HDMI 1.4's abilities. While chroma subsampling suffices in movies and television, as it has for decades, it degrades desktop environments significantly, and can render some techniques such as subpixel text rendering useless.

Meanwhile HDMI 2.0 support has been slow to reach PC video cards. NVIDIA offered it on the high-end the soonest with the Maxwell 2 family - though taking some time to trickle down to lower price HTPC-class video cards - while AMD missed out entirely as their initial plans for HDMI 2.0 were scratched alongside any planned 20nm GPUs. Thankfully PC video cards have supported DisplayPort 1.2 for quite some time, so DisplayPort to HDMI adapters were always an option.

However early DisplayPort 1.2 to HDMI 2.0 adapters were in reality using HDMI 1.4 signaling and chroma subsampling to support 4K@60Hz at reduced image quality. As the necessary controllers were not yet on the market this was making the best of a bad situation, but it was not helped by the fact that many of these adapters were labeled HDMI 2.0 without supporting HDMI 2.0's full bandwidth. So with the release of the first proper HDMI 2.0 adapters, this has led to some confusion.

And that brings us to Club3D's DisplayPort 1.2 to HDMI 2.0 adapter, the first such full HDMI 2.0 adapter to reach the market. Club3D's adapter should allow any DP 1.2 port to be turned into an HDMI 2.0 port with full support for 4K60p with full image quality 4:4:4 chroma subsampling. After the releases of pseudo-HDMI 2.0 adapters over the last several months, this is finally the real McCoy for HDMI 2.0 adapters.

The key here today is that unlike those early pseudo-2.0 adapters, Club3D's adapter finally enables full HDMI 2.0 support with video cards that don't support native HDMI 2.0. This includes AMD's entire lineup, pre-Maxwell 2 NVIDIA cards, and Intel-based systems with a DisplayPort but not an HDMI 2.0 LS-Pcon. In fact, AMD explicitly stated support for DP 1.2 to HDMI 2.0 dongles in their recent driver update, paving the way to using this adapter with their cards.

While we're covering the specifications, it also bears mentioning that Club3D's adapter also supports HDCP 2.2. Though as HDCP 2.2 is an end-to-end standard this means that the host video card still needs to support HDCP 2.2 to begin with, as Club3D's adapter simply operates as a repeater. As a result compatibility with 4K content on older cards will be hit and miss, as services like Netflix require HDCP 2.2 for their 4K content.

Finally, Club3D will be offering two versions of the adapter: a full size DisplayPort version that should work with most desktop video cards, and a Mini DisplayPort version for laptops and all other video cards. And with a roughly $30 asking price listed today it is an attractive option when it is otherwise unreasonable to replace a video card with one that provides HDMI 2.0 in its place.

POST A COMMENT

28 Comments

View All Comments

  • nathanddrews - Wednesday, December 23, 2015 - link

    No, you misread - as many do - VESA is claiming DSC is VISUALLY lossless compression, not "virtually lossless". You can go read about the technique on their website as well as read about the studies that they conducted. It sounds legit and given VESA's record, I have little reason to doubt them. But like all things, it has to be implemented in products we can actually buy to be worth anything.

    Worst case scenario, 5K 120Hz displays come out and use DP1.3 MST for no compression.
    Reply
  • wiak - Wednesday, December 23, 2015 - link

    2016 Radeons will have HDMI 2.0 and DisplayPort 1.3, look into the article here on anandtech for more info Reply
  • wiak - Wednesday, December 23, 2015 - link

    and i find it pretty awesome that my now 4 year old Radeon HD 7970 can run 4k@60hz over HDMI 2.0, even some APUs like Carrizo/Kaveri supports DisplayPort 1.2, to bad those stupid OEMs dont implement DP on their products, as i welcome my new DisplayPort overlords

    FYI: it seems that HD 6970 is the minimum you need to get HDMI 2.0 by using this Club3D HDMI 2.0 adapter, and ofc a DP Port on the card
    Reply
  • anynigma - Tuesday, December 22, 2015 - link

    I have a Gsync monitor with only a DP 1.2 input. Sorry if this is an ignorant question, but will this adaptor work with an HDMI source leading to DP 1.2 Display, or is it one-directional? Reply
  • Hul8 - Tuesday, December 22, 2015 - link

    Since it's an active adapter, it only works one way.

    Regardless, G-Sync would still only work thru DisplayPort.
    Reply
  • Olaf van der Spek - Tuesday, December 22, 2015 - link

    Most passive stuff isn't reversible either. Reply
  • Flunk - Tuesday, December 22, 2015 - link

    You'd need an active, powered adapter to do that. HDMI isn't flexible enough to support that without something converting between the two. I don't anyone has made one to this date. Reply
  • Olaf van der Spek - Tuesday, December 22, 2015 - link

    > However with DisplayPorts almost never appearing on TVs,

    Is this because the TV cartel prefers to push their own patent encumbered HDMI standard?
    Reply
  • emn13 - Tuesday, December 22, 2015 - link

    It's weird. Displayport should be cheaper, so why exactly HDMI 2.0 even has a chance makes little sense - unless there's something fishy going on - a cartel doesn't sound entirely implausible. Reply
  • rstat1 - Tuesday, December 22, 2015 - link

    By the time DisplayPort got to market, things had been shipping with HDMI for almost 5yrs already, so it's more likely a "momentum" thing than anything neferious like cartels or patent crap. Reply

Log in

Don't have an account? Sign up now