For almost as long as this website has been existence, there has been ample speculation and concern over the future of Moore’s Law. The observation, penned by Intel’s co-founded Gordon Moore, has to date correctly predicted the driving force behind the rapid growth of the electronics industry, with massive increases in transistor counts enabling faster and faster processors over the generations.

The heart of Moore’s Law, that transistor counts will continue to increase, is for the foreseeable future still alive and well, with plans for transistors reaching out to 7nm and beyond. However in the interim there is greater concern over whether the pace of Moore’s Law is sustainable and whether fabs can continue to develop smaller processes every two years as they have for so many years in the past.

The challenge facing semiconductor fabs is that the complexity of the task – consistently etching into silicon at smaller and smaller scales – increases with every new node, and trivial physics issues at larger nodes have become serious issues at smaller nodes. This in turn continues to drive up the costs of developing the next generation of semiconductor fabs, and even that is predicated on the physics issues being resolved in a timely manner. No other industry is tasked with breaking the laws of physics every two years, and over the years the semiconductor industry has been increasingly whittled down as firms have been pushed out by the technical and financial hurdles in keeping up with the traditional front-runners.

The biggest front runner in turn is of course Intel, who has for many years now been at the forefront of semiconductor development, and by-and-large the bellwether for the semiconductor fabrication industry as a whole. So when Intel speaks up on the challenges they face, others listen, and this was definitely the case for yesterday’s Intel earnings announcement.

As part of their call, Intel has announced that they have pushed back their schedule for the deployment of their 10nm process, and in turn it has affected their product development roadmap. Acknowledging that the traditional two year cadence has become (at best) a two and a half year cadence for Intel, the company’s 10nm process, originally scheduled to go into volume production in late 2016, is now scheduled to reach volume production in the second half of 2017, a delay of near a year. This delay means that Intel’s current 14nm node will in effect become a three year node for the company, with 10nm not entering volume production until almost three years after 14nm hit the same point in 2014.

Intel’s initial struggles with 14nm have been well publicized, with the company having launched their 14nm process later than they would have liked. With their 22nm process having launched in Q2 of 2012, 14nm didn’t reach the same point until Q4 of 2014, and by traditional desktop standards the delay has been even longer. Ultimately Intel was hoping that the delays they experienced with 14nm would be an aberration, but that has not been the case.

Intel’s latest delay ends up being part of a larger trend in semiconductor manufacturing, which has seen the most recent nodes stick around much longer than before. Intel’s leading node for desktop processors in particular has been 22nm for close to three years. Meanwhile competitors TSMC and Samsung have made much greater use of their 28nm nodes than expected, as their planar 20nm nodes have seen relatively little usage due to leakage, causing some customers to wait for their respective 16nm/14nm FinFET nodes, which offer better electrical characteristics at these small geometries than planar transistors. Observationally then there’s nothing new from Intel’s announcement that we haven’t already seen, but it confirms the expected and all too unfortunate news that even the industry’s current bellwether isn’t going to be able to keep up with a traditional two year cadence.


Intel Historical Development Cadence

Meanwhile the fact that 14nm is going to be around for another year at Intel presents its own challenges for Intel’s product groups as well as their fabrication groups, which brings us to the second part of Intel’s announcement. Intel’s traditional development model for processors over the last decade has been the company’s famous tick-tock model – releasing processors built on an existing architecture and a new manufacturing node (tick), and then following that up with a new architecture built on the then-mature manufacturing node (tock), and repeating the cycle all over again – which in turn is built on the two year development cadence. Intel wants to have new products every year, and alternating architectures and manufacturing nodes was the sanest, safest way to achieve that. However with the delay of 10nm, it means that Intel now has an additional year to fill in their product lineup, and that means tick-tock is on the rocks.

Previously rumored and now confirmed by Intel, the company will be developing a 3rd generation 14nm Core product, to fit in between the company’s forthcoming 14nm Skylake (2015) and 10nm Cannonlake (2017) processor families.

Intel Core Family Roadmap
  Previous Roadmap New Roadmap
2014 Broadwell Broadwell
2015 Skylake Skylake
2016 Cannonlake Kaby Lake (New)
2017 (10nm New Architecture) Cannonlake
2018 N/A (10nm New Architecture)

The new processor family is being dubbed Kaby Lake. It will be based on the preceding Skylake micro-architecture but with key performance enhancements to differentiate it from Skylake and to offer a further generation of performance improvements in light of the delay of Intel’s 10nm process. Intel hasn’t gone into detail at this time over just what those enhancements will be for Kaby Lake, though we are curious over just how far in advance Intel has been planning for the new family. Intel has several options here, including back-porting some of their planned Cannonlake enhancements, or looking at smaller-scale alternatives, depending on just how long Kaby Lake has been under development.

Kaby Lake in turn comes from Intel’s desire to have yearly product updates, but also to meet customer demands for predictable product updates. The PC industry as a whole is still strongly tethered to yearly hardware cycles, which puts OEMs in a tight spot if they don’t have anything new to sell. Intel has already partially gone down this route once with the Haswell Refresh processors for 2014, which served to cover the 14nm delay, and Kaby Lake in turn is a more thorough take on the process.

Finally, looking at a longer term perspective, while Intel won’t be able to maintain their two year development cadence for 10nm, the company hasn’t given up on it entirely. The company is still hoping for a two year cadence for the shift from 10nm to 7nm, which ideally would see 7nm hit volume production in 2019. Given the longer timeframes Intel has required for both 14nm and 10nm, a two year cadence for 7nm is definitely questionable at this time, though not impossible.

For the moment at least this means tick-tock isn’t quite dead at Intel – it’s merely on the rocks. What happens from here may more than anything else depend on the state of the long in development Extreme Ultra-Violet (EUV) technology, which Intel isn’t implementing for 10nm, but if it’s ready for 7nm would speed up the development process. Ultimately with any luck we should hear about the final fate of tick-tock as early as the end of 2016, when Intel has a better idea of when their 7nm process will be ready.

Source: Intel Earnings Call via Seeking Alpha (Transcript)

POST A COMMENT

137 Comments

View All Comments

  • emn13 - Friday, July 17, 2015 - link

    There's been shockingly little progress since sandy bridge in normal desktop workloads.

    http://anandtech.com/bench/product/287?vs=1260

    Anything that's not using new extensions is likely to run only slightly faster - not enough to be particularly compelling. Personally I don't think that speed differences of around 25% are noticable if you're using a system normally (productively) as opposed to trying to focus on its performance.
    Reply
  • Morawka - Thursday, July 16, 2015 - link

    the 4790k saw a 400Mhz increase in base clock and turbo clock. that's pretty good for just a refresh. first intel stock cpu to clock at 4.0 ghz. Reply
  • nikaldro - Friday, July 17, 2015 - link

    C'mon now. The 4790K was clearly an exception. Reply
  • ImSpartacus - Thursday, July 16, 2015 - link

    If the oems don't have someone on payroll that can read semiaccurate and make the most basic of predictions, then they deserve what's coming to them.

    I'm a random guy from the internet and I'm totally not surprised that broadwell is mia, by and large, on the desktop. I have zero qualifications and relevant experience.

    And even that aside, people are constantly howling that moores law is dead/dying. The tech world is really risky compared to most industries.

    I don't feel sorry for the Dells of the world.
    Reply
  • psyq321 - Friday, July 17, 2015 - link

    I am quite sure that the key OEMs were well aware of the delays this way or the other. Even much less important companies which collaborate with Intel have knowledge about parts many months and, sometimes, years before these pieces of info leak to public, not to talk about key OEMs like Apple, Dell, etc.

    Also, it would be rather foolish to bet your business on a single CPU vendor's ability to always be on time when it comes to process innovation. This is already seen many times in the GPU space - companies adapt, there will be rebrands, maybe some features will be added in minor refreshes and the CPU SKU will get a shiny new product number - and the business will go on, as usual.
    Reply
  • DanNeely - Thursday, July 16, 2015 - link

    May's leaked roadmap had a few broadwell desktop chips launching in 2015Q2 (I think these were just the ones with the big IGP with the on package dram), with the majority of product lines going direct to skylake in q3.

    With the continuing 14nm struggles this isn't a surprise; Intel's said since last summer that all the fab problems would cut into Broadwell's lifespan, but not delay Skylake from it's planned launch date.

    http://www.techspot.com/news/60572-leaked-intel-de...
    Reply
  • extide - Thursday, July 16, 2015 - link

    There are no 'continuing' 14nm problems. 14nm is done and a working process. It wont be long before Intel starts shipping 600+mm^2 Phi2 dies out to key customers (if they haven't already started).

    Skylake is basically launching when it is supposed to which absorbs most of the 14nm delay and just chops off a bunch of broadwell's shelf life, which is frankly good for all of us.
    Reply
  • lhsbrandon - Thursday, July 16, 2015 - link

    HP has Carrizo in at least 2 laptop models that I have seen. Reply
  • MrCommunistGen - Thursday, July 16, 2015 - link

    I had to look pretty hard, but I found a Carrizo laptop:
    http://store.hp.com/us/en/pdp/Laptops/hp-pavilion-...

    Sadly, asside from the Carrizo chip (A10-8700P) most of the specs are decidedly quite 2011:
    15.6" 1366x768 display
    8GB Single Channel RAM
    750GB 5400RPM HDD
    100Mbps Ethernet
    802.11 bgn 1x1 Wi-Fi
    Reply
  • MrCommunistGen - Thursday, July 16, 2015 - link

    gah typo

    asside -> aside
    Reply

Log in

Don't have an account? Sign up now