Due to what Samsung is citing as a surge in demand for larger capacity SSDs, they have now launched two new models offering up to two terabytes of storage each. In order to drive the extra capacity, they have also launched a new SSD controller in the MHX controller. Our resident SSD expert Kristian expects the MHX to be similar in design to the MEX controller, but with additional DRAM to track the extra blocks.

The 2TB 850 EVO leverages the same 32-layer 128 Gbit TLC V-NAND that we have already seen in the smaller capacity 850 EVO products, but the 850 PRO will use a new 128 Gbit 2-bit MLC die, but still at 32-layers. It should be a nice addition to the 850 PRO series, especially with the rise of 4K video and the extra storage it requires.

Samsung 2TB SSD Specifications
Model 850 PRO 850 EVO
Controller Samsung MHX
NAND Samsung 128Gbit 40nm MLC V-NAND 32-layers Samsung 128Gbit 40nm TLC V-NAND 32-layers
DRAM (LPDDR3) 2GB
Sequential Read 550MB/s 540MB/s
Sequential Write 520MB/s 520MB/s
4KB Random Read 100K IOPS 98K IOPS
4KB Random Write 90K IOPS 90K IOPS
Power 5mW (DevSLP) / 3.3W (read) / 3.4W (write) 5mW (DevSLP) / 3.7W (read) / 4.7W (write)
Encryption AES-256, TCG Opal 2.0 & IEEE-1667 (eDrive supported)
Endurance 300TB 150TB
Warranty 10 years 5 years
Price $1000 $800

Samsung will still package these drives in the same 7mm 2.5” SSD enclosure which means they will be SATA based for now, but Samsung has said they will be moving their 3D NAND to mSATA and M.2 form factors as well. Endurance ratings for the drives are 10 years or 300 TBW (Terabytes Written) for the PRO, and 5 years or 150 TBW for the EVO model.

The 850 Pro retails for $1000, and the 850 EVO retails for $800. Although not inexpensive by any means, and still much more than the $75 of a spinning disk, the prices are right around double the 1TB models in the lineup so there is not any extra premium to get the larger models at this time.

Kristian should have a full review of the new models soon.

 

Source: Samsung

POST A COMMENT

57 Comments

View All Comments

  • pixelstuff - Tuesday, July 7, 2015 - link

    Back in March I wrote Samsung asking specifically for a 2TB 850 Pro and also M.2 form factors in the 850 Pro series. I'm sure they already had something in the works, but this announcement makes me feel like I actually accomplished something with that effort. Reply
  • jwcalla - Tuesday, July 7, 2015 - link

    Will it come with working TRIM that doesn't corrupt data? Reply
  • Oxford Guy - Tuesday, July 7, 2015 - link

    Isn't that just a Linux issue, due to the use of queued trim or something? Reply
  • leexgx - Wednesday, July 8, 2015 - link

    thats just a issue with samsung poor SATA 3.2 poor implementation saying it supports stuff that it does not support (affects OSX as well) windows does it sequently so you're fine as long as your on windows system Reply
  • Kristian Vättö - Wednesday, July 8, 2015 - link

    So far there haven't been any reports of TRIM issues under OS X, so it seems to be limited to Linux. Reply
  • Oxford Guy - Monday, July 13, 2015 - link

    I have noticed random file corruption on my Macbook Pro with 1 TB mystery Samsung SSD, which is most likely TLC (probably an 840 EVO). Reply
  • Laststop311 - Tuesday, July 7, 2015 - link

    These are cool, but when I do build my next system I do not want a sata based ssd. I would of considered these if they could of been offered in sata express at the very least. Even sata express is already fully saturated and does not offer enough bandwidth for the fastest ssd's. 10gbit sata express just doesn't cut it, need 32gbit ultra m2 to give the fastest ssd's enough breathing room to max out without being bottlenecked by interface speed.

    I'm 100% sure my next build which will be skylake-e will be using a motherboard with dual ultra m2 slots. By that time I expect samsung will have its v-nand on m2 ssd's and be able to fit 1TB of space instead of only 512GB. Would like to use 2 of them for 2TB of ssd space and have no spinning HDD's inside the case whatsoever, the NAS will handle bulk storage, no 3.5" HDD keeps noise and vibration levels down and allows airflow to be less restricted and cuts down on sources leaking heat into the case. We will still be waiting awhile for 2TB on m2 ssd's as we are still waiting for 1TB on m2 ssds. Well I guess they could release one of these samsungs with one of those sff-8639 connectors that intel has on their nvme pci-e drive and have a 2TB 2.5" drive that has full 32gbit/s access.
    Reply
  • Impulses - Wednesday, July 8, 2015 - link

    I actually see myself going with one or two large SATA drives like these for data in future builds, and then a smaller PCI-E NVMe drive for the OS. I imagine even a year or two down the line there'll still be a cost divide between the two, particularly if we're still straddling the line between TLC consumer drives and higher end MLC drives.

    Shoot, if I was doing a new build right now I'd run the 400GB Intel 750 SSD as my OS/scratch drive (would probably go 256GB if such an option existed) and then Samsung 850 EVO drives for data. Hanging unto my dual 830s for now but will probably move to an 850 this year, well before I decide to replace my 2500K & P67A.
    Reply
  • sulu1977 - Wednesday, July 8, 2015 - link

    If I need to put this drive in storage where the temperature varies from 45 deg F to 98 deg F, how much data will it retain after 2 years? Reply
  • canthearu - Thursday, July 9, 2015 - link

    If you use it in a normal desktop, you will get data retention on the order of at least 5 to 10 years.

    Everyone badly misunderstands the retention presentation from JEDEC. The worst case situation only applies in rare situations that are hard to duplicate even if you try. Your average desktop is so far away from this worst case situation that you can't even compare the two.

    Firstly, the reduced retention is based on using ALL the erase cycles of the NAND cells. Most desktops SSDs would be lucky to reach 10% wear, let alone 100% wear. Retention on NAND is orders of magnitude better when near new then when fully worn.

    Secondly, this is talking about server SSDs, not client SSDs. Server SSDs have a lot more error correction and spare space that lets the makers use the NAND a lot more times. While client MLC NAND may be rated for 3k cycles, server eMLC NAND can be rated for 30k cycles. JEDEC specifies a lower retention for server NAND at the end of NAND life based on allowing NAND to be used more heavily.

    Third, you should be slapped silly for suggesting that you would spend $1000 on an SSD and then putting it onto the shelf. A terrible waste of money when you could buy a couple of 2TB hard drives for much less and have devices better suited for the job.
    Reply

Log in

Don't have an account? Sign up now