Overclocking

Finally, no review of a high-end video card would be complete without a look at overclocking performance.

From a design standpoint, GTX 980 Ti already ships close to its power limits. NVIDIA’s 250W TDP can only be raised another 10% – to 275W – meaning that in TDP limited scenarios there’s not much headroom to play with. On the other hand with the stock voltage being relatively low, in clockspeed limited scenarios there’s still some room for pushing the performance envelope through overvolting. And neither of these options addresses the most potent aspect of overclocking, which is pushing the entire clockspeed curve higher at the same voltages by increasing the clockspeed offsets.

GTX Titan X by comparison ended up being a good overclocker, and while we'd expect GTX 980 Tis to use slightly lower quality chips as part of the binning process, it should still overclock rather well.

GeForce GTX 980 Ti Overclocking
  Stock Overclocked
Core Clock 1000MHz 1250MHz
Boost Clock 1075Mhz 1326MHz
Max Boost Clock 1202MHz 1477MHz
Memory Clock 7GHz 8GHz
Max Voltage 1.187v 1.23v

Overall we're able to get another 250MHz (25%) out of the GTX 980 Ti's GPU, and another 1GHz (14%) out of its VRAM. This pushes the GTX 980 Ti's clockspeeds up to 1326MHz for the standard boost clock, and 1477MHz for the maximum boost clock. The card is heavily TDP limited at this point, so it's unlikely to sustain clockspeeds over 1400MHz, but working clockspeeds in the 1300MHz range are certainly sustainable. Meanwhile interestingly enough, this is actually a slightly better overclock than what we saw with the GTX Titan X; the Titan was only able to get another 200MHz out of its GPU and 800MHz out of its memory. So GTX 980 Ti ends up being the better overclocker by 50MHz.

OC: Battlefield 4 - 3840x2160 - Ultra Quality - 0x MSAA

OC: Crysis 3 - 3840x2160 - High Quality + FXAA

OC: Shadow of Mordor - 3840x2160 - Ultra Quality

OC: Shadow of Mordor - Min Frame Rate - 3840x2160 - Ultra Quality

OC: The Talos Principle - 3840x2160 - Ultra Quality

OC: Total War: Attila - 3840x2160 - Max Quality + Perf Shadows

The gains from this overclock are a very consistent across all 5 of our sample games at 4K, with the average performance increase being 20%. Though not quite enough to push the GTX 980 Ti above 60fps in Shadow of Mordor or Crysis 3, it is enough to crack 60fps on Battlefield 4 and The Talos Principle.

OC: Load Power Consumption - Crysis 3

OC: Load Power Consumption - FurMark

OC: Load GPU Temperature - Crysis 3

OC: Load GPU Temperature - FurMark

OC: Load Noise Levels - Crysis 3

OC: Load Noise Levels - FurMark

The cost of that 20% overclock in terms of power and noise is similarly straightforward. You're looking at an increased power cost of 30W or so at the wall – in-line with the 25W increase in the card’s TDP – while on the noise front the GTX 980 Ti is pushed out of its sweet spot. Card noise levels will increase by around 4.5dB(A).

Power, Temperature, & Noise Final Words
Comments Locked

290 Comments

View All Comments

  • mapesdhs - Wednesday, June 3, 2015 - link

    He was highlighting incorrect grammar, not a typo. Btw, that should have been "it's", not "its", for the same reason. ;D My old English teacher would have used bullets for such errors if such as allowed...
  • mapesdhs - Wednesday, June 3, 2015 - link

    ...and of course my own typo of 'as' instead of 'was' once again shows how annoying it is that in 2015 we still can't edit our posts on AT. :\
  • FlushedBubblyJock - Wednesday, June 10, 2015 - link

    thank you so much this is english class after all
  • blastlike - Friday, June 26, 2015 - link

    LOL you are so retarded. You try being a bitch and correcting others and at the end you fall into your own pit.Pathetic, lol keep it up.
  • Gothmoth - Monday, June 1, 2015 - link

    Toll, du beherrscht deine Mutterprache.. welch gewaltige Geistesleistung...... Amis.....
  • Gothmoth - Monday, June 1, 2015 - link

    2015 and on Anandtech we are still unable to edit comments.... here is the missing "s",
  • freedom4556 - Friday, June 12, 2015 - link

    ...and you typo in yours? Or so Google translate suggests.
  • shaolin95 - Friday, October 23, 2015 - link

    Yes but the 980ti is still untouchable basically so 28nm or not...ComputerGuy2006...show me something better ;)
  • Flunk - Sunday, May 31, 2015 - link

    lower nm = more transistors in the same space = more performance, and possibly reductions in heat and power usage. There is only so much they can do on the 28nm node, which is why the next generation will likely utterly massacre the current one. 4K will be feasible at a reasonable price point.
  • Refuge - Monday, June 1, 2015 - link

    Depending on yields, lets not get too excited yet.

    I'll be excited when I get the email from Amazon saying my GTX1000TI is going to be here in two days and says I only spent $500 after rebate. :)

Log in

Don't have an account? Sign up now