CPU Real World Performance

A small note on real world testing against synthetic testing – due to the way that DRAM affects a system, there can be a large disconnect between what we can observe in synthetic tests against real world testing. Synthetic tests are designed to exploit various feature XYZ, usually in an unrealistic scenario, such as pure memory read speeds or bandwidth numbers. While these are good for exploring the peak potential of a system, they often to not translate as well as CPU speed does if we invoke some common prosumer real world task. So while spending 10x on memory might show a large improvement in peak bandwidth numbers, users will have to weigh up the real world benefits in order to find the day-to-day difference when going for expensive hardware. Typically a limiting factor might be something else in the system, such as the size of a cache, so with all the will in the world a faster read speed won’t make much difference. As a result, we tend to stick to real world tests for almost all of our testing (with a couple of minor suggestions). Our benchmarks are either derived from areas such as transcoding a film or come from a regular software format such as molecular dynamics running a consistent scene.

Handbrake v0.9.9

For HandBrake, we take two videos (a 2h20 640x266 DVD rip and a 10min double UHD 3840x4320 animation short) and convert them to x264 format in an MP4 container.  Results are given in terms of the frames per second processed, and HandBrake uses as many threads as possible.

HandBrake v0.9.9 LQ Film

HandBrake v0.9.9 HQ Film

The low quality conversion is more reliant on CPU cycles available, while the high resolution conversion seems to have a very slight ~3% benefit moving up to DDR4-3000 memory.

WinRAR 5.01

Our WinRAR test from 2013 is updated to the latest version of WinRAR at the start of 2014. We compress a set of 2867 files across 320 folders totaling 1.52 GB in size – 95% of these files are small typical website files, and the rest (90% of the size) are small 30 second 720p videos.

WinRAR 5.01

The biggest difference showed a 5% gain over DDR4-2133 C15, although this seemed at random.

FastStone Image Viewer 4.9

FastStone Image Viewer is a free piece of software I have been using for quite a few years now. It allows quick viewing of flat images, as well as resizing, changing color depth, adding simple text or simple filters. It also has a bulk image conversion tool, which we use here. The software currently operates only in single-thread mode, which should change in later versions of the software. For this test, we convert a series of 170 files, of various resolutions, dimensions and types (of a total size of 163MB), all to the .gif format of 640x480 dimensions. Results shown are in seconds, lower is better.

FastStone Image Viewer 4.9

No difference between the memory speeds in FastStone.

x264 HD 3.0 Benchmark

The x264 HD Benchmark uses a common HD encoding tool to process an HD MPEG2 source at 1280x720 at 3963 Kbps. This test represents a standardized result which can be compared across other reviews, and is dependent on both CPU power and memory speed. The benchmark performs a 2-pass encode, and the results shown are the average frame rate of each pass performed four times. Higher is better this time around.

x264 HD 3.0, 1st Pass

x264 HD 3.0, 2nd Pass

The faster memory showed a 2.5% gain on the first pass, but less than a 1% gain in the second pass.

7-Zip 9.2

As an open source compression tool, 7-Zip is a popular tool for making sets of files easier to handle and transfer. The software offers up its own benchmark, to which we report the result.

7-Zip 9.2

At most a 2% gain was shown by 3000+ memory.

Mozilla Kraken 1.1

One of the more popular web benchmarks that stresses various codes, we run this benchmark in Chrome 35.

Mozilla Kraken 1.1

Kraken seemed to prefer the fast 1.2V memory, giving a 4.8% gain at DDR4-2800 C16, although this did not translate into the faster memory.

WebXPRT

A more in-depth web test featuring stock price rendering, image manipulation and face recognition algorithms, also run in Chrome 35.

WebXPRT

The DDR4-3200 gave an 11% gain over the base JEDEC memory, although this seemed to be more of a step than a slow rise.

Enabling XMP Memory Scaling on Haswell: Professional Performance
Comments Locked

120 Comments

View All Comments

  • jabber - Thursday, February 5, 2015 - link

    Crikey...I'm still on 16GB of DDR2 ECC! I feel old.
  • foxtrot1_1 - Thursday, February 5, 2015 - link

    If you're still running DDR2 it's probably not the RAM that's holding your system back.
  • nathanddrews - Friday, February 6, 2015 - link

    Clearly. It's rather sad to see how little impact RAM has on performance... which begs the question of who is buying this stuff? Is the only strength stability during overclocking?
  • III-V - Friday, February 6, 2015 - link

    Well Haswell-E users are tied to DDR4, so yeah there's that :)

    Of course, that's not what you were talking about. Memory bandwidth can have a big effect on certain workloads. IGPs need a bit of it (tapers off hard after 2133 MHz), but I know programs like WinZip and 7-Zip love memory bandwidth. There's certainly a lot of server and HPC workloads that love it too, but for most users, you're certainly right -- it's not worth it at the moment and may not really ever be a concerning bottleneck.
  • r3loaded - Thursday, February 5, 2015 - link

    You mean to say you've not bought a single computer since Core 2? Damn!
  • Murloc - Thursday, February 5, 2015 - link

    well do you really need additional CPU power?

    My overclocked E8500 (with stock cooler) was a beast, there was so much headroom, and I didn't change computer because of it.

    Right now I'm on a i5 750 from 2009 or something and it's totally fine. Also my GTX 275 still handles games in full hd just fine although not at max settings and it also becomes hot and only has DX10 so it's obsolete.
    So after 6 years, it's only the GPU that could use upgrading, the CPU/RAM part is not bottlenecking anything.

    Well not having sata 6 and that limiting my SSD is the one bad thing. I don't have any USB3 pendrives so I don't miss that.
    It's technology and power consumption making my CPU/chipset obsolete rather than performance.
  • Guspaz - Thursday, February 5, 2015 - link

    I'm still running a first-gen i7 (Nehalem) as my work computer, and it's still plenty snappy. I've got 12GB of RAM in the thing, and whatever I do have in the way of performance limitations would largely be resolved by sticking an SSD in there.
  • svan1971 - Sunday, February 8, 2015 - link

    Get the PX-AG256M6e say goodbye to sata 3 limitations. I put one in an old x58 board and its amazing what a 6 year old 3.6 oc'd i7 can do.
  • mikato - Monday, February 9, 2015 - link

    Nice post. I had an E7300 system and I had already upgraded the GPU to a GTX 760 and maxed out memory. It was somewhat slow in the newer games I played (Call of Duty), then I bought an E8500 on ebay and put that in and overclocked it finding a sweet spot, but it was still not quite as fast as I wanted. The poor optimization of COD Ghosts was partly to blame, but I ended up redoing the whole system at that point.

    I do use an i7-950 Bloomfield at work still and it does just fine.
  • jabber - Thursday, February 5, 2015 - link

    Just in clarify, I'm running a dual quad core 3.33Ghz Xeon setup. Still keeps up with a i7 in a lot of cases. They cost peanuts too.

Log in

Don't have an account? Sign up now