Single Channel vs. Dual Channel Memory
aka Why Apple uses 2x4GB as a base option for the iMac

As a result of this review, Lenovo and I have spoken back and forth regarding the DRAM situation around the P300. When sampling the media for the P300 series, their goal would seem to be to show off their default Haswell Xeon workstation and gather feedback. Due to the whole reviewing procedure, we only test the one configuration that is sent to us, so conclusions about performance could plausibly be completely different if a separate configuration had ended up on the doorstep.

The issue at hand is that the system, as per Lenovo’s system configurator, only gives one module of DRAM by default. This happened to be the configuration that was sent out to the media for review. For anyone outside the technology industry, this might not sound like an issue, but for anyone that has delved into how a computer works should see this as an immediate yellow flag, especially when paired with a dual channel processor.

To cut a long explanation short, a single memory module used in a system with a dual channel processor means that peak memory performance that requires a lot of memory accesses is slower than the peak potential of the processor. A dual channel processor can issue a command that reads or writes from the memory, and the system can access each memory channel independently and at the same time, thereby halving the time to read or write a big block of data. Haswell processors also support up to two memory modules per channel, which gives four DRAM slots in total.

Lenovo’s initial response to my concerns was a little terse. Rather than acknowledge a potential problem with performance, it was redirected around to a potential benefit. By offering a single 8GB DRAM module by default, rather than a 2 x 4GB arrangement, users could upgrade the system to a maximum of 32GB at a later date by adding more 8GB modules.

There was another disagreement regarding price. Again, I suggested that a 2 x 4 GB option should be considered, although there was no way for me to select this in the configurator:

Should a user want to take advantage of dual channel operation, using two modules of the same size to keep performance optimal, it would require an extra $395 outlay. This is despite the reality that the module itself costs as little as $70 over at Newegg, making a 464% markup over retail cost. One response on this issue was that Lenovo also acts as an OEM with resellers and did not want to price compete with them. The reality for consumers is that reducing that $395 to $125 would still be a bit expensive, but more in line with what a prosumer might expect.

Even if a seller wants to be able to offer a 1x8GB configuration with this system then by all means do so, but please adjust the default option to 2x4GB. This way, if a prosumer or IT department of a company want to purchase a number of systems, if they have to manually select 1x8 GB then they might actually know what they are doing performance wise. Even better would be a disclaimer on the website notifying a user of potential loss in peak performance due to the choice would be best.

As I most of our readers know, here at AnandTech we do not tend to make suggestions without some hard data to back it up. To this end, we ran the P300 through our benchmark suite twice – once in the default 1x8GB configuration, and another in a 2x4GB configuration using some Kingston memory we have in from a previous review. Both sets of modules were verified at the same speed (DDR3-1600 CAS 11), and the results comparison is as follows. Percentage improvements above 5% were listed in green.

A number of benchmarks show complete ambivalence to the adjustment from single channel memory to dual channel memory. However, there is a number of key prosumer type software that is heavily affected by the dual channel arrangement:

x264 4K encoding: +30.5%
Fluid Dynamics: +30.0%
OpenSSL: +27.6% / +25.4%
PCMark8 Storage: +19.2%
SYSMark Media: +10.3%
Pro/Engineer: +9.0%
Compression: +8.7%

While it is true that not everyone will be using this sort of software, Lenovo could easily be removing a potential negative by offering a dual channel arrangement by default.

In the title of this page, it mentions Apple’s newest iMac, the model that comes with the 5K screen. I bring this into the picture because it shows a level of detail surrounding DRAM selections and perhaps a different mindset when it comes to hardware selection. If I navigate to the Apple’s Configurator, it gives me the following options for DRAM:

Apple gives three options with their Haswell processors: 2x4GB, 2x8GB or 4x8GB. This means that Apple will only sell you an iMac in a dual channel configuration, rather than any lopsided configuration. By limiting their offering to the user base, it subsequently provides a level of performance that maximizes the potential of the system regardless of what the system is used for.

Ultimately using a single module configuration might invoke a little of the Dunning-Kruger effect – if a user does not know their system is not running at its potential, there won’t be any complaints. Unfortunately this skews the reality of the situation, as I’m sure that if up to 30% extra performance were offered, they would take it – depending on the price.

Offering a 2x4GB option by default is something Lenovo could do very quickly, and cost them very little in the process, although it might make them miss out on potential sales of 8GB DRAM modules at $395 each.

Professional Performance Lenovo ThinkStation P300 Conclusion


View All Comments

  • MadDuffy - Tuesday, November 4, 2014 - link

    IBM doesn't have anything to do with this. We are coming up on a DECADE since that unit was sold to Lenovo. Reply
  • hojnikb - Tuesday, November 4, 2014 - link

    Thats why you build your own workstation and get exactly what you need :) Reply
  • npz - Tuesday, November 4, 2014 - link

    And non-ECC on a Xeon!

    I seriously don't understand that, for this kind of money. And ECC versions of unbuffered dimms are only a bit more.
  • GTVic - Tuesday, November 4, 2014 - link

    I don't understand the point of whining about specs on a particular model of computer. What you and other posters apparently don't understand that this is the base model of the lowest end computer in the P-Series lineup. If you want options for ECC, SSD, etc then you would typically start at the P500 model and specify options that suit your budget from there. Reply
  • basroil - Wednesday, November 5, 2014 - link

    ECC versions are NOT a bit more, usually fetch 20% more. And that's recent, it used to be that ECC versions of 8gb sticks were almost double the price!

    For the E3 series and CAD, ECC ram isn't really necessary though, and any savings are good
  • duploxxx - Tuesday, November 4, 2014 - link

    nothing wrong with 8GB ram on a base model with a 4core cpu and a generic HD. you need to see specs in perspective.

    although 1 * 8 i would prefer 2 * 4
  • tyger11 - Tuesday, November 4, 2014 - link

    Who is this 'IBM' of which you speak? :) Reply
  • retrospooty - Tuesday, November 4, 2014 - link

    The P300 is the low end of the workstation lineup. The P500,700,900 are all above it. Reply
  • mdrury - Monday, November 10, 2014 - link

    Just FYI - IBM sold it's PC division to Lenovo in 2005, and is currently in the midst of selling off it's X86-based server division (System X) to Lenovo as well. So curse (or praise) the Chinese company called Lenovo, not IBM. :-) Reply
  • satai - Tuesday, November 4, 2014 - link

    Hard Drive Seagate 1TB 7200RPM SSHD. o'rly? Reply

Log in

Don't have an account? Sign up now