Introduction and Setup Impressions

Over the last couple of years, the ultra-compact form factor (UCFF) has emerged as one of the bright spots in the troubled PC market. Intel kickstarted the category with their Sandy Bridge NUC kits in early 2013. Recognizing the popularity of this segment, other vendors also began to promote similar products. GIGABYTE targets this market segment with an extensive lineup of products under the BRIX brand. We recently looked at the high-end Haswell BRIX, the GB-BXi7-4500. The focus of this review is on the opposite side of the spectrum - they Bay Trail-D Celeron J1900-based GB-BXBT-1900. As a note, due to GIGABYTE's regional marketing policies, this model is currently not being sold in the North American market, but targets price conscious buyers everywhere else.

Similar to other BRIX units, the BXBT-1900 comes barebones. An important point to note is that, unlike the higher-end BRIX units, the BXBT-1900 doesn't support mSATA drives. The support for 2.5" drives makes the z-height a bit more than the BRIX s (pure mSATA) models that we have looked at before. The dimensions (56.1 mm x 107.6 mm x 114.4 mm) otherwise conform to the smallest possible BRIX units (29.9 mm x 107.6 mm x 114.4 mm). Another point of difference is the presence of only one SO-DIMM DDR3L slot rated for operation at 1333 MHz (compared to the dual 1600 MHz-capable slots in the Haswell-based units). We configured the review unit to end up with the following components:

GIGABYTE GB-BXBT-1900 Specifications
Processor Intel Celeron J1900
(4C/4T x 2.00 GHz (2.41 GHz Turbo), 22nm, 2MB L2, 10W)
Memory 1 x 4GB DDR3L-1600
Graphics Intel HD Graphics
Disk Drive(s) Samsung SSD 840 EVO 120GB 2.5" SSD
Networking 1x Gigabit Ethernet, 1x1 802.11n/Bluetooth  mPCIe
Audio Capable of 5.1/7.1 digital output with HD audio bitstreaming (HDMI)
Operating System

Retail unit is barebones, but we installed Windows 8.1 Pro x64

Pricing (As configured) ~$170 (barebones) + $129 (DRAM + 2.5" SSD)
Full Specifications GB-BXBT-1900 Specifications

The BXBT-1900 kit doesn't come with any pre-installed OS, but does come with a driver CD. In the higher-end kits, GIGABYTE has moved to USB keys for the drivers. In any case, we ended up installing the latest drivers downloaded off GIGABYTE's product support page. In addition to the main unit, the other components of the package include a 30 W (12V @ 2.5A) adapter, a US power cord, a VESA mount (along with the necessary screws), a driver CD and a quick-start guide.

The gallery below takes us around the hardware in the unit.

In order to complete our build, we opted for a 2.5" Samsung SSD 840 EVO (with the read performance bug recently fixed) and a single Crucial CT51264BF160B (Micron 8KTF51264HZ-1G6J1) 4 GB SO-DIMM.

In the table below, we have an overview of the various systems that we are comparing the BXBT-1900 against. Note that they may not belong to the same market segment. The relevant configuration details of the machines are provided so that readers have an understanding of why some benchmark numbers are skewed for or against the BXBT-1900 when we come to those sections.

Comparative PC Configurations
Aspect GIGABYTE GB-BXBT-1900
CPU Intel Celeron J1900 Intel Core i5-4250U
GPU Intel HD Graphics Intel HD Graphics 5000
RAM Crucial CT51264BF160B (Micron 8KTF51264HZ-1G6J1)
11-11-11-28 @ 1600 MHz
1x4 GB
Crucial CT51264BF160B (Micron 8KTF51264HZ-1G6J1)
11-11-11-28 @ 1600 MHz
2x4 GB
Storage Samsung SSD 840 EVO
(120 GB, 2.5in SATA 6Gb/s, 19nm, TLC)
Intel SSD 530 Series
(180 GB, PCIe Module mSATA 6Gb/s, 20nm, MLC)
Wi-Fi Realtek 8723BE Wireless LAN 802.11n
(1x1 802.11n - 150 Mbps)
Intel Dual Band Wireless-AC 7260
(2x2 802.11ac - 867 Mbps)
Price (in USD, when built) $292 $680
Performance Metrics - I
POST A COMMENT

35 Comments

View All Comments

  • nathanddrews - Friday, October 24, 2014 - link

    A dual-NIC version of this would make an incredible pfSense router. Reply
  • The_Assimilator - Saturday, October 25, 2014 - link

    I had the exact same thought. I hope Gigabyte reads these comments and decides to produce such a device. Reply
  • abufrejoval - Sunday, October 26, 2014 - link

    The GIGABYTE GA-J1900N-D3V (recently reviewed here) has those two ports and would fit that niche as well. There is also lots of USB Ethernet adapters out there, which at 100Mbit/USB 2.0 might be good enough for your uplink and there is also Gbit/USB 3.0 variants which may be a little trickier in terms of device drivers. Reply
  • artk2219 - Friday, October 24, 2014 - link

    I just wanted to post this here. Dualcore sandy bridge cpu, m-itx, m-pcie, it can run a laptop display, msata, runs off a 19v powersupply from a dell or hp, and uses sodimms in case you have any laptop memory around. For 52 dollars.

    http://www.newegg.com/Product/Product.aspx?Item=N8...
    Reply
  • bliq00 - Friday, October 24, 2014 - link

    how does that run a laptop display? Reply
  • jdav - Friday, October 24, 2014 - link

    LVDS monitor ribbon interface in the corner by the mSATA interface. Most laptop displays use this format to connect to the motherboard. The white 8-pin header to the left of that I believe is for the display power. Reply
  • Jambe - Friday, October 24, 2014 - link

    So this variant (with the J1900) will never come to NA?

    :(
    Reply
  • alhopper - Saturday, October 25, 2014 - link

    What's the point of this review if the product cannot be purchased? Reply
  • OrphanageExplosion - Saturday, October 25, 2014 - link

    Because Anandtech does have readers outside of North America? Reply
  • Tikcus9666 - Saturday, October 25, 2014 - link

    Because the world is much much bigger than the USA Reply

Log in

Don't have an account? Sign up now