Sometimes it feels odd to review the cheaper elements of the motherboard market. The more expensive models have more to play with, whereas the sub $160 market for Z97 comes down to the choice of an individual controller or two. Here is where brand loyalty and styling seem to matter more than absolute feature set. To make matters worse for MSI, one of the other manufacturers is also branding their motherboards with ‘Gaming X’, making it harder to forge that nomenclature as a brand. Today we are looking at the MSI Z97 Gaming 5 at $160, which at the time of writing is sold out on Newegg.

MSI Z97 Gaming 5 Overview

One of MSI’s main focus points of the last twelve months has been style. This typically means fashioned heatsinks, almost-invisible traces and if possible a reduction of on-the-board components (trying to balance price as well). MSI wants its motherboards to be shown off, rather than hidden inside a case, such that other users can show it off to their friends and perhaps entice them into a similar build. The Gaming 5 aims to the more cost conscious Haswell build while still maintaining a full ATX size in the red and black livery featuring the MSI Gaming logo.

On the gaming side of the hardware equation the Gaming 5 is fitted with a Killer E2205 network port which comes with application prioritization software, as well as an enhanced Realtek ALC1150 audio solution via Audio Boost. For users with USB DACs there is a feature to offer enhanced power to a pair of USB ports as well to improve power signal quality. There is also M.2 support for 22x42mm to 22x80mm devices up to PCIe 2.0 x2 speeds, and all the fan headers onboard are 4-pin.

One of MSI’s positive points of late has been the BIOS and software combination, which for the gaming range is boosted by a six-month premium subscription to XSplit. The box also contains a door hanger to let people know you are gaming and an MSI Gaming case badge to affix to the build.

Performance at stock is a bit of a mixed bag. We get a good array of CPU results due to MSI’s aggressive MultiCore Turbo, along with low idle power consumption and DPC Latency, but MSI’s tri-annual USB speed bug rears its head again. POST times are also longer than expected, being north of 14 seconds in both stock and stripped mode. Despite our audio tests also performing poorly, MSI has informed us of a driver update that should improve performance.

The best point of comparison for the Gaming 5 will be the Z97 Guard Pro at $110 we reviewed previously. Compared to the Guard Pro, the Gaming 5 gets SLI support, Killer NIC over Realtek, ALC1150 over ALC892 audio, HDMI rather than DisplayPort, support for 3 full-length PCIe devices, more rear panel USB ports, more in the package and perhaps a nicer looking product overall. This amount might be a sufficient difference to account for the $50 upgrade, although whereas the price of the Guard Pro might suit a Pentium build, the Z97 Gaming 5 really indicates a good i3 or i5 build.

Visual Inspection

One of the first things I noticed about the Z97 Gaming 5 is the PCB, especially in the socket area. MSI would seem to have a knack for making a PCB look polished, especially on these lower end models where there are fewer components. Like other gaming ranges, MSI uses a red on black theme here, with the heatsinks being the main source of red on the motherboard. The slots and port connectors are all in black, and even the power delivery chokes are an off gray as to not interfere with the general look.

The power delivery heatsinks use an odd surface area design and are not conjoined by a heatpipe, but feel sturdy enough for four phases each. The socket area is not outlined by the typical white box denoting the Intel minimum distances, although we had no issue fitting our CPU heatsink here. The socket area has access to four fan headers – two CPU headers to the top right, one SYS header just above the first PCIe slot and a final one below the 24-pin ATX power connector. The other fan header is at the bottom right of the motherboard.

As the DRAM slots are not color coordinated to indicate to users where to install the first memory stick, MSI puts in a handy diagram on the motherboard.

On the right hand side of the motherboard are the voltage check points. This is more of an overclocker tool, hence MSI has only placed pads here rather than an easier-to-use molded array with bundled connectors. Further down the board is the USB 3.0 header which MSI has placed at right angles to the motherboard to align with the SATA ports but also to not get in the way of any PCIe devices.

MSI uses the six SATA 6 Gbps ports from the chipset, all of which are RAID 0/1/5/10 capable. SATA_5/6 share bandwidth with the M.2 when the M.2 is in SATA mode, so there is a small amount of mental juggling to perform when installing storage. This is despite M.2 is still a few quarters away from mainstream sales. Note that there is no SATA Express, perhaps indicating that SATAe should be reserved for the more expensive produce on the shelf.

The bottom of the motherboard has the front panel headers, two USB 2.0 headers, a TPM header, a COM header, and an interesting addition as the ‘Audio Power’ header. One of MSI’s features is better USB power – this uses a bundled adapter and a 4-pin molex to drive a fresher 5V signal into the USB on the rear panel to give a power signal with less jitter. The concept being that it would benefit USB Audio users for better signal transmission.

The PCIe layout of the motherboard uses x16, x8/x8 and x8/x4/x4 when the full length slots are in use, with four x1 PCIe slots from the chipset added in for good measure. Note that if a device is installed into the bottom PCIe slot then SLI will not work, as the first two main PCIe slots will then run at x8/x4, and SLI needs x8/x8 minimum to work.

The rear panel is a main focus for some of MSI’s gaming features. On the far left are a combination PS/2 port and two USB 2.0 ports, with these USB 2.0 ports being part of the ‘Gaming Device Port’. MSI’s marketing materials say that with 3x more gold in the connector, the port is more responsive and has a 10x longer lifetime. While the latter statement is most likely true, the first statement is dubious – more gold would mean less impedance for signals, although without overriding software to increase the polling rate I doubt it would do anything for responsiveness.

Elsewhere on the rear panel we get another two USB 2.0 ports, VGA/DVI-D/HDMI video outputs, four USB 3.0 ports, the Killer E2205 network port and audio jacks with extra gold plating.

Board Features

MSI Z97 Gaming 5
Price US (Newegg)
Size ATX
CPU Interface LGA1150
Chipset Intel Z97
Memory Slots Four DDR3 DIMM slots supporting up to 32 GB
Up to Dual Channel, 1066-3300 MHz
Video Outputs HDMI (4096x2304 at 24 Hz or 2560x1600 at 60 Hz)
Network Connectivity Qualcomm Atheros Killer E2205
Onboard Audio Realtek ALC1150 via Audio Boost
Expansion Slots 3 x PCIe 3.0 x16 (x16, x8/x8, x8/x4/x4)
4 x PCIe 2.0 x1
Onboard Storage 6 x SATA 6 Gbps, RAID 0/1/5/10
1 x M.2 x2
M.2 shares bandwidth with SATA_5 and SATA_6.
USB 3.0 6 x USB 3.0 from Z97 (one header, four rear panel)
Onboard 6 x SATA 6 Gbps
1 x M.2 x2
1 x USB 3.0 Header
2 x USB 2.0 Headers
5 x Fan Headers
1 x TPM Header
1 x COM Header
Two Digit Debug LED
Front Audio Header
Front Panel Header
Voltage Check Points
Audio Power Header
Power Connectors 1 x 24-pin ATX
1 x 8-pin CPU
Fan Headers 2 x CPU (4-pin)
3 x USB (4-pin)
IO Panel 1 x PS/2 Combination Port
4 x USB 2.0 Ports
4 x USB 3.0 Ports
1 x Killer E2205 Network Port
Audio Jacks
Warranty Period 3 Years
Product Page Link

I have seen numerous discussions regarding the good and bad parts of an x8/x8 + x4 PCIe layout against the x8/x4/x4 orientation. Ultimately, I believe the former wins out, due to the fact that tri-Crossfire users are low in number and more likely to go to X99. With x8/x8 + x4 a user can still have an extra PCIe card while maintaining SLI. If a user needs three PCIe x4 cards for their build, chances are at least one of them is not PCIe bandwidth bound, which makes the PCIe 2.0 x4 slot preferred. What MSI has done is use x8/x4/x4, because this frees up the chipset PCIe lanes to be split into four PCIe 2.0 x1 slots. It would be interesting to see a user that has a situation where all those need to be filled.



View All Comments

  • Timbrelaine - Monday, October 06, 2014 - link

    The many hundreds of dollars they would save? Reply
  • fluxtatic - Tuesday, October 07, 2014 - link

    This. For gamers, X99 is an e-peen extender. Reply
  • typographie - Monday, October 06, 2014 - link

    DDR4 is actually not a thing in the mainstream market. Probably won't be until Skylake's release, either. We don't need it anyway. Reply
  • spidey81 - Monday, October 06, 2014 - link

    There's also talk that initially there will be controller support for both DDR3 and DDR4. Not sure if it is legitimate. It seems unlikely considering it would be extra space on the die used. Reply
  • fluxtatic - Tuesday, October 07, 2014 - link

    AMD did it a while back with Phenom II. When my M4A78 board died, I dropped the processor into an M5A97 EVO.

    That is, AMD might do simultaneous DDR3/DDR4, but I don't think it likely from Intel.
  • gw74 - Monday, October 06, 2014 - link

    "We don't need it anyway" is presumably what you also said about DDR3 when DDR2 was coming to the end of its lifecycle.

    "No one will need more than 637k of memory for a personal computer"
  • casperes1996 - Monday, October 06, 2014 - link

    He obviously meant as in "Right now we don't need it."
    Not that we'll never need it.

    Comparix X99 Haswell-E based systems with the likes of this just isn't fair, and you won't be able to put DDR3 into this.
    Nobody in this market needs DDR4 now anyway, n'or will they within the next few years.
  • gw74 - Monday, October 06, 2014 - link

    no he didn't obviously mean anything of the sort, because what do you mean by "need" anyway? just because you don't need the performance today, doesn't mean you shouldn't buy it now to future-proof your purchase. Reply
  • just4U - Wednesday, October 08, 2014 - link

    Future proofing sounds good on paper but by the time you actually need to be on something faster chances are you've already moved on to new Hardware perhaps... even several generations on.. Reply
  • Nite Owl - Monday, August 24, 2015 - link

    No such thing as future proof. What he meant is he isn't dumb enough to squander that kind of cash for very little performance increase. In "real world" bench marking ddr4 doesn't do much. As long as you have good high quality ddr3 your fine. I've been building since 2001. Last years latest and greatest always lasts me at least 3 years, at least. My 2007 build lasted through 2013 with only upgrading the video card, once! Still ran max settings on every game I play. Blind consumers that jump on things for the sake of doing drive up the prices. Nice going, slick! Reply

Log in

Don't have an account? Sign up now