4 TB NAS and Nearline Drives Face-Off: The Contenders

Prior to getting into the performance evaluation, we will take a look at the special aspects and compare the specifications of the ten drives being considered today.

Western Digital Red Pro 4 TB

The Red Pro is meant for 8-16 bay SMB / SME rackmount units. Compared to the WD Red, it has better performance, thanks to its 7200 RPM rotational speed. While the WD Red has utilized 1 TB and 1.2 TB / platter configurations, the Red Pro units have 600 GB and 800 GB platters for the 2 / 3 TB versions and the 4 TB version respectively. The lower areal density platters have been in production for quite some time, allowing Western Digital to use a more mature configuration for the Red Pro parts. Like the enterprise drives, the Red Pro comes with hardware-assisted vibration compensation, undergoes extended thermal burn-in testing and carries a 5-year warranty.

Western Digital Red 4 TB

The 4 TB WD Red that we evaluated for this piece is the same as the one that we used in last year's roundup, i.e, the NASware 2.0 version and not the NASware 3.0 version. Even though the WD Reds initially targeted 1-5 bay systems, NASware 3.0 updates the vibration handling mechanism (firmware / calibration) to enable usage in 1-8 bay units. Despite the firmware not being upgradable for older models, WD is honouring warranties even if the NASware 2.0 drives are used in 6-8 bay units. Other aspects of the WD Red models have already been touched upon in our previous reviews.

Seagate Constellation ES.3 4 TB

The Constellation ES.3 lineup is last year's enterprise play (sixth-generation) from Seagate in this market space. It targets applications where capacity, performance and durability under heavy workloads are primary considerations. The drives have a standard 7200 RPM spindle speed, but differ from other units by having a 128 MB multi-segmented cache on-board (64 MB is the standard nowadays). All models are 512N (i.e, native 512 bytes per sector, enabling usage without performance loss for legacy applications).

Seagate Enterprise Capacity 3.5" HDD v4 4 TB

The Enterprise Capacity 3.5" HDD features Seagate's eighth generation drive technology and retains the 128 MB cache of its predecessor. The main difference is that there are no 512N models (either 4K native for the 6 TB model, and 512 emulated for the others). Seagate happens to be the first to use 1 TB platters for its enterprise drives, and this has enabled the Enterprise Capacity lineup to include 6 TB variants. For this review, we managed to get hold of the 4 TB version. On the basis of paper specifications, it looks to be a very good alternative to the WD Red Pro.

Seagate NAS HDD 4 TB

The NAS HDD lineup goes head-to-head against the WD Red. The slightly higher spindle speeds (5900 RPM vs. 5400 RPM) tends to give it the performance advantage at the cost a slight power consumption penalty. Seagate implements the NAS-specific firmware features as part of the NASworks package. We have looked into various features of the NAS HDD lineup in our previous roundup.

Seagate Terascale SED 4 TB

Seagate also supplied us the Terascale drives for this roundup, since we had the WD Se in our previous roundup. The Terascale (previously Constellation CS) goes head-to-head against the WD Se in all departments - it is meant for applications where scalability / capacity is a primary factor, followed by low power consumption and cost. Both 5900 and 7200 RPM versions are available, but our review units belonged to the former category and came with the Instant Secure Erase feature. Unlike the other Seagate enterprise drives in our review samples, this one comes with 64 MB of cache. Seagate claims lowest power consumption in the enterprise drive category for the Terascale drives.

Western Digital Re 4 TB

The Western Digital Re is meant to go head-to-head with the Seagate Constellation ES.3 and Enterprise Capacity 3.5" HDD v4. The application areas are the same - enterprise applications where performance, reliability and durability under heavy workloads are primary requirements. The Re drives are the highest-performing SATA drives from Western Digital. The Xe drives are a class above the Re, but they are available only in capacities of up to 900 GB and come with a SAS interface only. We have been using Re drives in all our NAS reviews so far.

Western Digital Se 4 TB

The Se drives come from WD's Datacenter Storage Business Unit and meant for applications where scalable storage (i.e, reliable storage which doesn't cost an arm and a leg for scenarios where capacity, rather than performance, is of primary importance). WD uses them in their own datacenter. Like other enterprise drives, they come with a self-encryption option and carry longer warranties. When compared to WD Re, the difference comes in the URE (unrecoverable error rates), MTBF ratings and suggested workloads. Further details can be seen in our launch coverage of the WD Se.

Toshiba MG03ACA400

The MG03ACA400 is Toshiba's highest capacity nearline storage device targeting enterprise applications. The specifications are standard - a 7200 RPM drive with a 64 MB buffer. Toshiba makes it clear that the drives target entry-level servers, storage arrays and RAID systems - There is no emphasis on extreme performance, so it is only fair to expect it to slot with the WD Se and Seagate Terascale drives rather than the Re and Enterprise Capacity ones. The street price (as of the time of this article going live) is similar to that of the Terascale, and this only reinforces our perception.

HGST Ultrastar 7K4000 SAS

The HGST Ultrastar 7K4000 is the odd-one out in our sample set today. We had requested HGST for the SATA version of the 7K4000, as that goes head-to-head with the Re, Constellation ES.3 and the Enterprise Capacity drives, but they only had the SAS interface version available for review sampling. The standout aspect of the Ultrastar lineup is the 2.0 million hours MTBF rating. Comparing SATA and SAS drives are like comparing apples and oranges, but, at least, we have the same 7200 RPM spindle speed and 64 MB buffer like most of the other drives. As mentioned in the previous section, we are only going to look at the RAID-5 performance benchmark numbers for this drive in today's review.

Introduction and Testbed Setup Feature Set Comparison
Comments Locked


View All Comments

  • willis936 - Friday, August 8, 2014 - link

    Thank you for the overview of ATA protocol features on page 3. Resources like that are hard to find without spending hours digging through a spec.
  • Anonymous Blowhard - Friday, August 8, 2014 - link

    "Enterprise" or not, running RAID5 on 4TB drives with a 10^14 URE is asking for trouble.
  • Guspaz - Friday, August 8, 2014 - link

    Only when rebuilding. The chances of getting a read error on two disks at the same time on the same piece of data is extremely remote. Of course, when rebuilding, you only need the error on one disk... which is why I'm running raidz2 :)
  • rufuselder - Thursday, October 9, 2014 - link

    I'd say WD AV-GP 2 TB AV is the best choice (supported by for example http://www.consumertop.com/best-computer-storage-g... ). I'm not a big fan of raidz2, sorry.
  • NonSequitor - Friday, August 8, 2014 - link

    This came up on the last article about these drives as well. Currently I'm running six 3TB Reds in a RAID-6. Over the last year they've rebuilt once a month. I have Linux set to log any errors, and it's never logged a single block error. With the double parity, it seems like it would have logged one by now if the actual URE were that high on a per-bit basis. This unit was a replacement for a unit using nine drives, which did have two drive failures in three years, but both failures were announced by SMART before any actual failure occurred. The SANs at work do scrubs once a week, and kick out about 2% of drives a year. It really seems like reality is better than the specifications in this case.
  • jaden24 - Friday, August 8, 2014 - link

    Why are they rebuilding once a month?
  • NonSequitor - Friday, August 8, 2014 - link

    I have it set that way to spot a failing drive before it actually needs to be rebuilt. It's an orderly rebuild, checkarray, like this: http://www.thomas-krenn.com/en/wiki/Mdadm_checkarr...
    In the past it has been useful as it has caused drives to throw a SMART error for reallocates during the process (with some 1TB drives) allowing me to replace them proactively.
  • jaden24 - Saturday, August 9, 2014 - link

    Interesting. I had never heard of the practice before. Only consistent scrubbing, SMART configured, and extended burn-ins prior to use.
  • imaheadcase - Friday, August 8, 2014 - link

    Ganesh, could you get a response from Synology/asus/Qnap/etc as to why they don't have NAS with better CPU/RAM? Those products are nice, but many people wish to have them with more CPU/ram for media streaming. I find it very odd than none of the major players don't contribute to this market.

    Why no 3ghz CPU and 16gig systems? It can't be cost since the ones that can be upgraded ram wise are cheap upgrades.

    Out of the current popular NAS, only 2 support Transcoding, and multiple 1080p streams. But they have terrible software.
  • Gigaplex - Monday, August 11, 2014 - link

    You don't need a 3GHz CPU, 16GB RAM NAS to support media streaming.

Log in

Don't have an account? Sign up now