While there is a lot of focus on the mainstream desktop market, we hastily reviewed the new entrant to the low-end socketed desktop from AMD, the AM1 Kabini platform back in April.  Since then we have acquired all four members of the family, the two quad core Athlon APUs and the two Sempron APUs, for testing.  AMD’s movement into the upgradable tablet/desktop crossover arena is an interesting one for sure.

What Is The Point of AM1?

AMD’s reason for releasing a socketed low-power platform was derived from requests in low cost areas of the market.  System integrators and companies in South America, Africa and Central Asia wanted a base system which would run an operating system which could be upgraded in the future to higher specification components, rather than sticking with a low-power but non-upgradable mobile CPU.  The end result was AM1, the name given to a system using an FS1b socket with a desktop Kabini APU and an aim to build an upgradable CPU/motherboard combination for around $60.

Typically when dealing with the low cost/low power end of the spectrum, these systems are designed such that the APU is soldered on to the motherboard. When a user wants one model in particular, it comes as part of a package, much in the same way as a mobile device. In fact we even played a small game of ‘spot the desktop Kabini’ back at Computex 2013 and saw models such as the aptly named KBN-I from ECS, using the soldered A6-5200 APU:

These systems often find their way into applications that have long upgrade cycles, such as embedded and digital signage. The novelty of an upgradeable, socketed package makes most sense in the desktop arena. With low cost segments focusing more on the entry-level segmentation, AMD believe that having this upgradeability might drive pressure in the entry market towards these upgradeable PC-like devices.

AMD is marketing the series as a cheap, low powered way to go to quad core. When building a CPU architecture there is often a point in frequency scaling which is most efficient, and any deviation from that causes a less-than-linear gain in performance for power. Under this paradigm, and the importance of single core speed, the general feeling at AnandTech is that single core performance is preferred to more cores. If we can get the same multi-core performance using half the number of cores within the same power bracket, then this solution would be preferred. The final piece of that puzzle however comes in terms of design and price, both of which are points that AMD is also aiming to be competitive.

Desktop Kabini

There are a total of four AM1 APUs on the market:

AMD AM1 Kabini APUs
  Athlon 5350 Athlon 5150 Sempron 3850 Sempron 2650
CPU Cores 4 4 4 2
CPU Frequency 2.05 GHz 1.60 GHz 1.30 GHz 1.45 GHz
GPU Cores 128 128 128 128
GPU Frequency 600 MHz 600 MHz 450 MHz 400 MHz
Memory Frequency 1600 MHz 1600 MHz 1600 MHz 1333 MHz
L2 Cache 2 MB 2 MB 2 MB 1 MB
TDP 25 W 25 W 25 W 25 W
Official Launch Price $59 $49 $39 $31

Each of these APUs features up to four 28nm Jaguar cores and a 128 SP implementation of AMD's GCN GPU. We've gone over both the Jaguar and GCN architectures in previous articles, so we won't spend a lot of time recapping them here. Jaguar is the latest in AMD's line of "cat" cores, designed to go up against Intel's Atom. GCN on the other hand is a well-known GPU design from AMD as well, cut down here to fit in a much smaller die area (and thermal envelope).

The Jaguar cores in Kabini are listed as 3.1mm2, and AMD is quoting that four of these cores will fit into a single Steamroller module. Unfortunately the dimensions of a Steamroller module are not known - a 32nm SOI Bulldozer module clocked in at 30.9 mm2 for example, but no equivalent number is available for 28nm Steamroller. However some quick math shows four Jaguar cores populates 12.4 mm2. This leaves the rest of the core for the L2 cache, IGP and a large amount of IO.

In fact there are a few images that can help us predict total die size. In AMD’s slide deck, we have the following:

Given that one core is 3.1 mm2, extrapolating out gives the size of the die at 31.4x the size of a single core, or 97.3 mm2. The GPU area is approximately 5.2x the size of a core, giving ~16.1 mm2 for 128 GCN cores, compared to 12.4 mm2 for CPU cores. The Video Codec Engine and Unified Video Decoder are not part of these totals, located on other parts of the APU. The memory controller clocks in at ~9.4 mm2 and the display/IO portion runs at ~7.3 mm2

AMD AM1 Kabini Part 2: The Competition and The Test


View All Comments

  • serpretetsky - Thursday, May 29, 2014 - link

    I'm not sure I understand the power chart on page 2. Is the title correct? Power difference? So the numbers we are seeing are power differentials between idle and load and not absolute values? Reply
  • casteve - Friday, May 30, 2014 - link

    Ian uses a 1250W PSU in this setup. So, absolute value is pretty meaningless when your system idles down in the low efficiency (and high slope) part of the power supply's curve. The delta power part at least provides an idea of what's going on. Reply
  • jospoortvliet - Sunday, June 1, 2014 - link

    Yet idle power is quite important - cpu's are idle most of the time... Reply
  • coburn_c - Thursday, May 29, 2014 - link

    There's your future of AMD. Scaling up Jaguar will fix their code/module problems and improve their perf/watt. There is certainly no future in their big cores. Reply
  • rootheday3 - Thursday, May 29, 2014 - link

    Ivy Bridge gt1 was 6 eus; bay trail is 4 eus. Reply
  • jvp - Friday, May 30, 2014 - link

    What is missing in this review is that some Intel processors have stripped down instruction sets. Like the Celeron J1900 with which the Athlon 5350 is compared as direct competitor.

    I'm also missing tests about performance when using virtual machines, and hardware accelerated encryption. These are area's that are becoming more and more important for systems.
  • R3MF - Friday, May 30, 2014 - link

    this is lovely, thanks, but how long before we get beema in socket AM1? Reply
  • R3MF - Friday, May 30, 2014 - link

    in addition, do i understand correctly that:
    kabini is 28nm TSMC, whereas
    beema is 28nm GF
  • plonk420 - Friday, May 30, 2014 - link

    thank you thank you THANK YOU for including i3-4300 series on the dGPU page! i've been wondering how they stand up to gaming on a budget as i've helped do 2 builds in the last couple months for the first time in years! Reply
  • Icehawk - Friday, May 30, 2014 - link

    I'm with prior posters - testing these low end machines with current games is all well and good but also unlikely to happen in real life. Can these handle games I'd be more likely to want to play on a low power device like TF2 or Diablo 3? NO CLUE. Reply

Log in

Don't have an account? Sign up now