Cooler Master

Cooler Master is a company with a tradition of cooling-related products and thus it is no wonder that they jumped into the AIO liquid coolers wagon almost instantly. They have a healthy selection of products and decided to ship us their two Nepton series coolers, their most popular series at this point in time, along with the Seidon 120V, a very low cost, entry level solution.

Cooler Master Seidon 120V

The Cooler Master Seidon 120V is the smallest, simplest and least expensive AIO cooler of this review. The packaging reflects that, being a relatively simple brown cardboard box, unlike any other in this particular roundup. Looks aside, the packaging is well designed, full of information on the cooler, and the cooler is very well protected inside the cardboard packaging.

Inside the box, the user will find a leaflet with installation instructions, the necessary mounting hardware, and a syringe with thermal compound. Also included is a single 120mm fan with a wide speed range of 600 to 2400 RPM; it is an all-black model with wavy blades.

Both technically and aesthetically, the Cooler Master Seidon 120V is a rather simple design. The 27mm thick, 120mm wide radiator is the smallest and least expensive design available today. Wavy aluminum fins are formed between the liquid pass-through channels, which are not dense but not sparse either. There are imperfections in the fins but these are to be expected with a low-cost radiator.

The square block-pump assembly is entirely made out of plastic, which is not bad in terms of durability but gives a feeling of cheapness. The company logo is etched on the top of the block and a bright blue LED turns on when the pump is powered on. Only the base of the block is made out of copper, which is expected given the price. This copper base has been attached to the rest of the assembly with the aid of ten triangular screws and has a smooth, well-machined surface, although it has not been machined down to a mirror finish. The tubing is corrugated and a little hard to bend but at least the fixing points on the CPU block assembly are rotatable sideways.

Cooler Master Nepton 140XL

Unlike the basic 120V, the Nepton 140XL is a significantly more sophisticated, detailed product. It does however cost twice as much as the 120V. It comes supplied in a carefully designed black-purple cardboard box, well protected inside cardboard packaging.

The bundle is not much different than above, limited to the necessary mounting hardware, a leaflet with installation instructions, and a syringe of thermal compound; a Y-splitter for the attachment of two fans onto one header is also included. Two powerful 140mm fans come with the cooler, with a speed range of 800 to 2000 RPM. These "Jetflo" fans are supposed to have high static pressure and the rubber pads absorb vibrations, reducing noise.

Visually, the Nepton 140XL is not much different from the Seidon 120V. Technically, the two coolers are nothing alike. The 140mm radiator of the Nepton 140XL is not only wider but is also 38mm deep, increasing the effective heat dissipation surface by well over 50%. Size aside, the design of the radiator is similar, with wavy aluminum fins between the heat exchanging channels and with a frame offering the ability to mount either 120mm or 140mm fans on it. However, it would seem that manufacturing imperfections are still present, with several of the fins significantly deformed. It appears as if the radiator was struck with something, deforming half a channel of fins, yet we received the packaging in excellent condition and this side of the radiator was facing inwards, towards the center of the packaging. Quality control issues in Cooler Master's manufacturing paradise are the only reasonable guess we can make -- that or the cooler was previously tested and repackaged for our review, though that seems unlikely.

The square block-pump assembly is once again entirely made out of plastic. Even though it looks much better and of higher quality than that of the 120V, plastic rarely is the way to go when you want a worthwhile aesthetic outcome. The company logo is etched on the top of the block and is surrounded by a frame with a white LED, which turns on when the pump is powered up. A plastic frame is sandwiched between the cap and the base of the assembly, with holes for the mounting of the installation brackets. The copper base of the assembly is smooth but not machined perfectly; although they cannot be felt by touch, the sandpaper grooves are clearly visible with a naked eye.

Cooler Master Nepton 280L

The Nepton 280L is Cooler Master's heavy artillery. We received it supplied inside a well-designed cardboard packaging with a black/purple color theme, visually very similar to that of the 140XL. The main attraction of the kit, the large 280mm radiator, dominates the theme of the box. Inside the box, with the exception of a slightly different installation instructions leaflet, we found the exact same bundle as that of the 140XL, including two of the same 140mm "Jetflo" fans.

The Cooler Master Nepton 280L might appear like an oversized version of the 140XL but it really is not. They do share many similarities but the main part of the kit, the radiator, is very different. The radiator of the 280L, as the name suggests, is 140mm wide and 280mm long, with room for up to four 140mm fans. The frame also offers support for 120mm fans, if the user would like to use 120mm fans instead for whatever reason. However, the radiator of the 280L is only 30mm thick, which is about 25% less than that of the 140XL. Therefore, although the heat dissipation surface is greater, it is not actually double that of the 140XL. Once again, minor deformations of the aluminum fins can be seen, although not nearly as many or as serious as those we encountered on the 140XL.

The square block-pump assembly is entirely identical to that used by the 140XL as well. It features the exact same size, mounting mechanism, pump, core and everything else. The same white LED lighting frame at the top of the block has also been installed. Unfortunately, the same mediocre copper base is also present, which could use a little bit better polishing for a product of this league and price range.

Introduction Corsair
Comments Locked

139 Comments

View All Comments

  • The PC Apologist - Wednesday, February 12, 2014 - link

    While I appreciate the amount of work and effort you have put in Fyll, I must disagree with you on several points. As many people have already pointed out, using the same fan for each different cooler will allow us to access the merits of each radiator, independent of the stock fan. A good radiator with a bad fan might perform similarly to a bad radiator with a good fan, yet clearly this is not the information we’re after. If we ignore every stock fan and use the best fans on the market (Noctua NF-F12, Corsair SP120, etc.), not only will it help guide purchasing decisions, it will also help satisfy our curiosity as Computer Enthusiasts.

    You raised the objection that purchasing additional fans will increase the total cost. This is as obvious as it is pointless. Coolers of this class are targeted towards quasi-enthusiasts, not cheapskates, in the first place. You should know that a lot of people out there still use stock coolers. If one really wants high value, the Cooler Master Hyper 212 EVO will suffice. And as mentioned, a high-end air cooler such as the Noctua NH-D14 will not only offer comparable performance, but also increased reliability as it does not have a pump that can potentially fail. All-in-One coolers like these appeal to people who want moderately high performance without the complexity of a true custom-loop water cooling system (quasi-enthusiasts). $40 additional cost should be factored into the cost-benefit analysis and buying-decision process, not immediately rejected. Your reluctance due to increased price is misplaced.

    Also, you said “And of course, most would just want to buy a kit and be done with it.” Can you please provide evidence for this blatantly dismissive and careless attitude? This may very well apply to the layman, but again, here at AnandTech we are enthusiasts, catering to enthusiasts. Would you really want to appeal to the common folk, who don’t know or care about CPU heat dissipation much less water cooling, with AIO coolers?

    Third, you said “The actual performance of a fan is not based on its RPM or CFM ratings, it is a very complicated matter. That would render any comparisons between different kits virtually useless.” You’re right, it’s not just rpm and cfm, Static Pressure must also be taken into account. Static Pressure is understood among computer enthusiasts as the capacity to move air through dense pathways (heatsinks and radiators) and the capacity to move water, underwater. Manufacturers usually have a static pressure rating for their fans, but because it’s largely not-understood by the public, that’s why we have reviewers and testers like you. You mentioned that there are a lot of fan choices out there, and I would agree. But because they’re so closely related, cooler reviewers tend to also cover and are knowledgeable about a wide variety of fans on the market.

    Understand that I have no quarrels with you as a person, just that many have come to understand that AnandTech is a producer of quality and responsible content and your latest post display certain fundamental flaws. I surely don’t want to come off as obnoxious or such, as I, myself, am going to apply for AnandTech’s Call for Writers in a few days. The reason I have taken so long is because I take the reputation of Anandtech’s professionalism very seriously and want to polish my writing samples. Again, I have no beef with you, but you do need to step your game up. I suspect that it is not a problem of your integrity as it is a problem of your critical thinking and reasoning skills. With just a little contemplation, you should begin to know what true enthusiasts would and ought to want.

    - The PC Apologist
  • HanzNFranzen - Wednesday, February 12, 2014 - link

    Except that this article was not about "the merits of different AOI radiators," it was a round up of available AOI's as they are sold.

    "Also, you said “And of course, most would just want to buy a kit and be done with it.” Can you please provide evidence for this blatantly dismissive and careless attitude? This may very well apply to the layman, but again, here at AnandTech we are enthusiasts, catering to enthusiasts."

    If you want to go that far, I'd say that a real water cooling enthusiast would say that these AOI's are a few steps up from junk that barely (or in most cases do not) outperform a cheaper air unit, and are exactly intended for laymans.... as a real water cooling enthusiast would be building a custom loop. The entire point of these prebuilt AOI's is for an easy entry into water cooling for the novice/semi enthusiast.

    Anandtech is one of the first sites I have come to seeking reviews of products for many years now. I can't think of any round up style article such as this where the writer started changing out parts as they saw fit before testing. I also would not expect a review of a retail product to be tested any other way than as it is shipped. If I wanted to know how my H100 would work with different fans, I would first look to forums and the mod community, not a retail round up article. If fact, just doing a search of past Anandtech roundups on coolers, I couldn't find one in which all the fans were changed to a standard before testing. Even the Anandtech Bench does not do this.

    "just that many have come to understand that AnandTech is a producer of quality and responsible content and your latest post display certain fundamental flaws."

    I completely disagree as I believe the professional and responsible way to create a roundup of this style is through objectivity and representing a product as it is sold to the customer.

    "I surely don’t want to come off as obnoxious or such, as I, myself, am going to apply for AnandTech’s Call for Writers in a few days."

    well, maybe in your second attempt you won't, although I'm already not looking forward to it.
  • The PC Apologist - Wednesday, February 12, 2014 - link

    Although I admire your resolve, your convictions are ultimately misplaced.

    First, I believe the problem with you is that you’re confusing the “is-ought” distinction. That is to say, just because something is a certain way, it doesn’t mean that it ought to be that way. Journalists give false information all the time, but that doesn’t mean they ought to give false information all the time. Teenagers taking drugs is commonplace, but that doesn’t mean they ought to be taking drugs. In both cases, there is a defect, an imperfection. Do not think that just because something is a certain way, that it should be that way; consider improvements, the ideal.

    Secondly, you said that you’ve read AnandTech for years and haven’t come across the idea of swapping fans or such. But see, you’re further mistaken because even if you just want to stick with conventions, the idea of swapping fans under theoretical scenarios is not new even to AnandTech (let alone other sites enthusiasts should already know about i.e. Linus and TTL). In the Anandtech article titled “Noctua NH-U12P: Top Performance and Silence,” one of my favorite pieces because it truly caters to the enthusiast taste, the writer remarks in this conclusions:

    “For those who don't care about overclocking, the Noctua NH-U12P is still a great choice. It cools as well as the best so far with one fan - at idle and under load at stock speeds. Add a second fan and the stock temperatures are all new records. We haven't tested a cooler that does a better job of cooling at stock speeds. However, the Noctua cooler with two fans at $90 is not cheap, and the Alpine coolers we recently tested do almost as well at about 1/6 the price. For most who won't overclock the Alpines are fine, but if you want the best stock air-cooling you can buy the Noctua NH-U12P with an extra NF-P12 fan is the ultimate. These test results for the Noctua are truly impressive, but they do not dethrone the Thermalright Ultra-120 eXtreme - at least not yet. The superb component here is the Noctua NF-P12 fan, which is a brilliant piece of engineering. We doubt our Thermalright or any air-cooler will top the 3.94GHz that seems to be the limit of our test bed Core 2 Duo. However, we suspect the Thermalright combined with the NF-P12 could match or even exceed the results with the Noctua heatsink. Having said that the practical reality is it is not easy to mount two NF-P12 fans on a Thermalright, whereas the Noctua heatsink is designed for push-pull and even comes with the extra wires to make it easy.”

    Here the writer not only explains to the audience how the product is at stock, he also offers alternative scenarios, separating the heatsink and fan as separate variables, evaluates the pros and cons of each case, and presents the ultimate solution, adding parts (fans in this case) to the stock configuration. Such is the standard we enthusiasts crave and ought to strive for. Any less and you’re not really an enthusiast.

    Thirdly, your third paragraph ending with “novice/semi enthusiast.” Perhaps you’ve completely missed the point of my second paragraph concerning “quasi-enthusiasts?” You’re just repeating my stance unaware of the fact that it is in fact my stance. Read carefully next time.

    And finally, as for you not looking forward to any of my future content, know that first, I won’t be losing any sleep. And second, you should reevaluate your thought and decision-making process when boycotting me. What exactly are you rejecting? My calling a spade a spade? By rejecting my brutal honesty in favor of the fluffy norm, you are saying a lot about yourself.

    - The PC Apologist
  • Rubix3 - Wednesday, February 12, 2014 - link

    PC Apologist - I would also add 'elitist' in with obnoxious. I actually find your comment rather offensive. If you truly believe that Anandtech exists to cater only to enthusiasts, then you are clueless. I am willing to bet any amount of money you choose that every employee at Anandtech as well as Anand himself would agree that the website is here for everyone of all backgrounds and knowledge levels. It is here to educate the "common folk" that need help and direction, while supplying tons of information and references to the most hardcore of enthusiast, and everything in between. I happen to fall into the lowly plebian category that you look down upon that does indeed want to buy one of these coolers and be done with it. If you are insisting to swap out fans, how do I know that the new fan does not perform worse than the stock fan on that particular radiator? In that case, I will spend extra money for less performance and not even know it. Is this what you would consider "professional and responsible"? For the sake of your writing aspirations I would certainly hope not.

    And as for those writing aspirations, perhaps the reason it is "taking so long" is because you have already submitted your subjective reviews and they were rejected as being worthless opinions? Or maybe, just maybe, because Anandtech is far more than "enthusiasts catering to enthusiasts" and you just simply do not fit. I for one am hoping that this sort of journalism never makes its way onto this website.

    BY THE WAY, Great write up E.Fyll! I appreciate your efforts! Your "game" is fine, no step up needed! My one and only request would also be to add in a high end air cooler simply as reference. Thanks!
  • The PC Apologist - Wednesday, February 12, 2014 - link

    Rubix3,

    Although you are antagonizing me, you do raise several important points/concerns and so I will address them.

    First, let’s address the elitist point. It is true that it is easy for Computer Enthusiasts who are only concerned with the high-end to have somewhat of a condescending or elitist attitude. The same holds true for audiophiles in high-end hi-fidelity audio and car enthusiasts dealing with sports cars. But it is merely easy; it is not inevitable. Where did you get the impression that I was somehow “looking down” upon you or any other newcomer? My parents are laymen when it comes to computers, do I look down at them? In fact my entire family is full of newbs when it comes to computers, must I immediately distance myself from them? I was merely pointing out the existence of a gap, a difference, between the layman and the enthusiast. And by painting the full spectrum (lowly plebian, everything in between, hardcore enthusiast), you’re essentially acknowledging my point. I never said that the laymen were somehow corrupt or morally depraved, just that they were not the target and appropriate consumer of these AIO coolers.

    Second, even if I was an elitist (which so far I haven’t announced), nowhere did I say that “AnandTech exists to cater only to enthusiasts.” You’re putting words in my mouth and turning my stance to an absolute. Consider the context and how I put it:

    “Also, you said “And of course, most would just want to buy a kit and be done with it.” Can you please provide evidence for this blatantly dismissive and careless attitude? This may very well apply to the layman, but again, here at AnandTech we are enthusiasts, catering to enthusiasts. Would you really want to appeal to the common folk, who don’t know or care about CPU heat dissipation much less water cooling, with AIO coolers?”

    Because it is easy to interpret “enthusiasts catering to enthusiasts” as “enthusiasts catering ONLY to other enthusiasts” by the unread, I will clarify. When one wants to communicate an idea effectively, one must first identity one’s own target audience. Once aware of this target audience, one must tailor one’s message and communication method in a way that would suit said target audience. Such is the maxim of relation/relevance and part of the art of rhetoric. When applied to AnandTech, the target audience is those who are interested in and want to know more about PCs, smartphones, enterprise computing, datacenter technologies, etc. It is largely technically stuff. And a choice has to be made: either cater to the beginner or cater to the veterans. It is extremely difficult, if not impossible to write an article such that it satisfies everybody; someone is bound to feel uncomfortable somewhere. But if one were to err on the enthusiast side, at least enthusiasts would feel at home and the rest could potentially learn and grow. I trust that you would agree that all else being equal, it is better to leave room for improvement than to dumb things down? That’s what I mean when I say AnandTech caters to enthusiasts; surely everyone, including newbies, is welcomed (I visited AT when I was a newbie too), but the tone is generally on the more pro side.

    Similarly, the AIO coolers also have a target audience. I maintain that they are for “quasi-enthusiasts,” people who want more than what air coolers can offer but don’t have the resources (time, money, but mostly expertise) to build a full custom loop, and not laymen. Laymen would not understand the benefits and risks of an AIO, much less be able to justify spending $100 when stock and budget coolers exist. By your own admission you are a layman and so subsequently these AIO are not for you. Of course you could make the decision to “buy one of these coolers and be done with it,” but it would be an ill-informed decision (because better options exists) and isn’t it our very job to inform?

    Third, concerning your “technical” concern, you said: “If you are insisting to swap out fans, how do I know that the new fan does not perform worse than the stock fan on that particular radiator? In that case, I will spend extra money for less performance and not even know it.” This concern is, at best, confused. How did you get the idea that I was somehow suggesting you swap stock fans for random fans for no other reason than to do it? Isn’t it obvious that the reason why one might want to replace stock fans with aftermarket fans is because said aftermarket fans perform better? It is the job of the reviewer to test and inform. My suggestion was to, in addition to the stock fans, include and test with the best fans on the market, namely the Noctua NF-F12 and Corsair SP120. If for a certain given radiator, the test results of the Noctua and Corsair are inferior to that of the stock fans’, the decision is obvious. Good grief…

    And finally, as for your speculations of my being rejected, I can assure you that I have not yet submitted anything to AnandTech and so I cannot possibly be rejected. But I get what you’re saying: you hate me. I hope at least by now you’ve come to realize that you’ve misunderstood me and that all that misdirected hatred is not only unproductive, but also embarrassing. As an aspiring writer in 2014, I’m well aware of the need for thick skin and a tough resolve. Having been an avid online gamer for several years now, I’ve encountered people of all walks of life, with varying degrees of education, debating/arguing skills, and indeed moral character. But whereas in-game I might hold a “Come at me bro!” attitude, I do have and will maintain a professional (albeit blunt) demeanor here at AnandTech. Although I must admit, it is sometimes difficult.

    - The PC Apologist
  • LoccOtHaN - Wednesday, May 14, 2014 - link

    Respect Bro :-) And by the way in near future i will have Nepton 280L ;-)
  • E.Fyll - Wednesday, February 12, 2014 - link

    Of course you can disagree, it is your right.

    I don't have to agree with you though. :)

    About the fans however, you are wrong. Static pressure is just another figure. At 0 CFM, you get maximum static pressure. At 0 static pressure, you have maximum CFM. In between those two however, that's a whole different story. You cannot possibly assess the performance at any given P/Q level by any of a fan's specifications. So let me include that in my sentence. If you compare fans based on their static pressure, CFM, RPM or SPL ratings alone, you are making a massive mistake. If you do not have the whole P/Q curve and do not know at least an estimate of the pressure that will develop, you know nothing at all.
  • The PC Apologist - Wednesday, February 12, 2014 - link

    But who is under the impression that we can judge fans by specifications and ratings alone? Why read reviews at all if we can judge by ratings alone?

    The whole point of reviewers is to do testing and verify for us what the numbers on the boxes cannot.
  • E.Fyll - Wednesday, February 12, 2014 - link

    If you under such impressions, it is your impressions that need to change. Start reading and try to comprehend what I wrote. I will not perform testing that is invalid simply because you wish to see something like it. As I said multiple times already, I will not test any such product with anything else than what comes supplied with it, unless no fan is supplied and none comes recommended. They are commercial products and I am testing their base, unmodified performance. Assuming that "enthusiasts", which also consist of the "majority of Anandtech's readers", will definitely go and buy another set of fans is just that; an assumption. I do not even care if it is a valid assumption or not; I simply do not like assumptions.

    But let me make an exception and assume your scenario. Let us even assume that I can use the same fan on all of the review's coolers, despite the fact that their sizes differ. Which fans should I use then? As each and every fan has a different performance curve, the performance results of each cooler will be different each time I change the fan. With Fan A cooler X might appear better, with Fan B cooler Y might appear better under the exact same conditions. Which is the better cooler? Why is it a better cooler? How many different fans should I test for a valid set of data?

    Such "tests", based on assumptions, are misleading. You can buy whichever fans you like, you may even put the radiator in your freezer if you want better performance - oh, wait, that will give you worse performance, the liquid will probably freeze. Scratch that. Anyway, I cannot possibly provide valid and comparable results based on what a user may or may not replace/modify/whatever. If you want a reviewer who would present you with a misleading set of data just because you assume that "most Anandtech's readers are enthusiasts and will definitely buy Noctua's or Corsair's top fans", then you are simply talking to the wrong person.

    And a friendly note: An enthusiast knows better than to buy a $100 AIO cooler and then spend another $40 on fans. I would rarely expect a true enthusiast who knows what he/she wants to make such a move. He/she will buy the product that can do the job out of the box. In the off chance that there is no commercial product capable of meeting the specific application demands, then he/she might consider modifying a commercial product over making a custom solution. Those that will buy something and then buy something else to adjust it to their needs remind me of people who order Château Margaux and then dilute it with Coke because they don't like its taste. It is not a bad wine at all; they just bought an expensive wine for all the wrong reasons.
  • The PC Apologist - Wednesday, February 12, 2014 - link

    I sense a little unease in your tone.

    I have stated my point and defended it.

    Because it takes time to prepare a thoughtful response, I will reply some other time.

    For now, I'll leave it to the readers to sort through your logically incoherent reasoning.

    - The PC Apologist

Log in

Don't have an account? Sign up now