While Anand deals with the detailed analysis of the Haswell CPU architecture and performance, a CPU is almost nothing without an accompanying chipset to provide connectivity and an interface with which to interact with the CPU.  For our Z87 launch article all the major manufacturers sent us a motherboard to test, around the $200 mark, in order to showcase what we as users can expect from them in a reasonable price bracket.  We also have managed to get hold of more of the nitty-gritty behind the Z87 platform, which has several features worth noting and talking about.

The Z87 Chipset

As consolidation occurs with parts of the system into the CPU, there could potentially be fewer and fewer opportunities for motherboard manufacturers to express their own individual take on each motherboard.  Nonetheless, this has not stopped them coming up with gaming ranges, overclocking ranges, and using any number of controllers to provide additional functionality above and beyond the native Z87 chipset.  Here is the chipset diagram for Z87 in a nutshell:

The first things to note are the lane allocations – we have a similar layout to Panther Point (Ivy Bridge) for 1x16, 2x8 or 1x8+2x4.  The processor now takes control of the digital display outputs rather than the PCH, and can also deal with DDR3L memory.  Natively the processor is set at 1333/1600 MHz, however from internal testing and from manufacturers almost every K-series SKU should handle DDR3-2400 at stock CPU speeds with ease.

On the chipset itself, we have a few new features – it is worth noting that it says ‘up to 8x PCIe 2.0, up to 6x USB 3.0 and up to 6x SATA 6 Gbps ports.  This is a feature new to the consumer chipset range called Flex I/O.

Flex IO

Typically with a motherboard chipset we have a fixed number of SATA ports, a fixed number of PCIe lanes and a fixed number of USB ports.  This is due to the fact that the PCH has them automatically wired in, and it is up to the motherboard manufacturer to connect the traces up within the Intel specified tolerances.  Flex IO changes all this, into a mini-FPGA style arrangement, where several of the ports available can be configured to SATA 6 Gbps, PCIe or USB 3.0.

We get a total of 18 points in the architecture, of which four are USB 3.0, six are PCIe and four are SATA 6 Gbps.  That leaves two pairs of two – the first pair can be assigned to USB 3.0 or PCIe, and the second pair can be assigned to SATA 6 Gbps or PCIe.  The only limitation is that there can only be a maximum of eight PCIe 2.0 slots.

This allows motherboard manufacturers to position their SKUs very nicely – the PCIe 2.0 lanes can be split into extra USB 3.0 or SATA 6 Gbps controllers as well, meaning that on high storage platforms the manufacturer can go full out SATA 6 Gbps with controllers.  There also remains the possibility that a motherboard manufacturer could assign all eight PCIe 2.0 lanes into a PCIe slot, giving that slot better bandwidth for multi-GPU scaling (at the expense of not being able to use those lanes for anything else such as PCIe x1).

The Intel Z87 Motherboard

Intel is still in the motherboard business for a couple of years, despite announcing their intention to leave the consumer motherboard market space.  Like AMD, when it comes to media preview kits, they may call upon one of the motherboard manufacturers to supply the motherboard to send out of reviews.  Until that day, we still get motherboards from Intel.  Our Intel motherboard sample is in Anand’s hands right now for the CPU and IGP end of our motherboard coverage, but it looks a little something like this:

The reason why I bring up the Intel DZ87KLT-75K is that we have access directly to its chipset diagram:

Perhaps annoyingly, this is a little misleading – the chipset diagram suggests that we have a 20 PCIe lane processor when in actual fact the motherboard is an x8/x4/x4 layout.  We can tell this because the PCH has all the 8x lanes being used – four for a Thunderbolt controller, two for Gigabit Ethernet, and one each for a USB 3.0 controller and a SATA 6 Gbps.  This allows the motherboard to have a total of eight USB 3.0 and eight SATA 6 Gbps, which from what we have seen in our Z87 motherboard preview, is not too far-fetched.

What about H87 and others?

Intel is launching several chipset variations for Haswell processors, including H- for consumers as well as B- and Q- variants for business.  The salient comparisons are as follows:

With H87 we lose CPU multiplier overclocking and multiple GPU configurations from the PEG lanes on the CPU.  H81 takes it a little further, restricting displays, limiting the PCIe to Gen 2, and removing features such as RST, SRT and Flex IO.

Business chipsets follow on from the H87 chipset in terms of overclocking/GPU allocations, but typically come with business level features and support.  For example, vPro needs a Q87 chipset, and B85 has fewer USB ports in total as well as not being iSIPP (Intel Stable Image Platform Program) eligible.

What about Display Configurations?

With “Shark Bay” (the platform combining a Haswell CPU and Lynx Point 8-series PCH), the ecosystem has moved the digital displays from the PCH to the CPU, leaving the VGA behind.  This allows the system to integrate the S0ix power states a lot better than before, reducing idle power consumption and improving wake from sleep times (a main goal of Shark Bay).  It also in some way allows Intel to have more control over the digital display allocations, especially dealing with WiDi.  The platform now looks like:

Arguably this may result in increased power consumption on the CPU, at the benefit of lower power consumption at the PCH (down 10%) which has to have a heatsink attached.  But the digital ports, like with Panther Point, can be configured to a wide variety of digital outputs in a similar way to Flex IO.

This is all from the processor itself of course – users with discrete GPUs will have different options from the GPU side of the equation. 

What Did I hear about an Integrated Voltage Regulator?

As part of the consolidation, Intel is moving the voltage regulators onto the CPU to deal with various parts of the system onto the CPU itself.  This means from a user perspective there should be less variation from the motherboard aspect in dealing with voltage inputs and quality, as only voltage needs to be pushed into the CPU for all the CPU features.  Nonetheless it still means users will have to negotiate the internal voltages such as VCore in order to provide good overclocks.  For extreme overclock users, it adds another element into potential CPU variation, meaning that searching for a good CPU may be a little bit more difficult.

Anand has gone into greater detail in his Haswell coverage, but this also means that the integrated GPU can increase its speed and voltage without having to ‘wake’ the CPU part of the system up from a low power state unless needed.

Enough Already, Where Are The Motherboards?

For our first Haswell motherboard review, I asked the main manufacturers of such wondrous items to supply me with a motherboard around the $200 mark which would form the cornerstone of the high-end mainstream sales.  Both our Sandy Bridge and Ivy Bridge initial coverage worked very well at this price point, and I begged the manufacturers to send samples to me as early as possible to we could pass more details on to our readers.  While deadlines are tight, we managed to take on the following:

 - Gigabyte Z87X-UD3H (MSRP $180, US Sale to $170)
 - MSI Z87-GD65 Gaming (MSRP $190)
 - ASRock Z87 Extreme6/AC (MSRP $220, US $20 Rebate for June)
 - ASUS Z87-Pro (MSRP $210)

We also have another set of ASRock motherboards in to test, including the OC Formula and mini-ITX models, but unfortunately time to review these before launch day ran out, so they will be covered over the coverage.

First up to review is the motherboard that arrived in our offices first for testing – the Gigabyte Z87X-UD3H!

Gigabyte Z87X-UD3H Overview, Visual Inspection, Board Features


View All Comments

  • HexiumVII - Sunday, June 30, 2013 - link

    Hey Ian! Maybe run the Asrock Z87 in water and let us know how waterproof it is! Reply
  • Hrel - Monday, July 8, 2013 - link

    You guys DO talk about how motherboard manufacturers have less and less to do now; with Intel moving more and more things onto the CPU die. Yet for some reason you still fail to ask WHY motherboards are getting MORE expensive. Not less. I got an AMAZING motherboard with SLI and massive overclocking ability that's rock solid back in 2007 for 125 dollars. Yet now that the northbridge isn't even ON the motherboard anymore I have to pay 175 for the SAME level of performance... WTF is that! Reply
  • adridu59 - Monday, July 8, 2013 - link

    It looks like you are playing the marketing game, because ALC1150 (nominally ALC900) is just a tweaked ALC898 (same as ALC889 and ALC892).

    More info: http://www.overclock.net/t/1398739/is-realteks-alc...
  • Rafalus - Sunday, July 28, 2013 - link

    Hi, Is it possible to stop TPU tuning eg when it reach 4.5GHz as I did not want to raise it higher? Reply
  • SilentRyder - Tuesday, October 22, 2013 - link

    Honestly i believe this integrated Voltage Regulator will cause many problems. If we check the previous Ivy Bridge main boards, They do have a huge power regulator designed on the top side of processor socket. Now the whole idea of power supplied from the mainboard is gone off. May be this technology will benefit laptops or any other mobile devices. but this is certainly a bad idea for desktop users.

    We would certainly have HEAT problems, which i am truly afraid of. I do not think haswell will support enough for overclocking. i never over clock my self but i am sure INTEL will change this concept on its new generations.

    Even laptops running in high temperature can be a issue.

    How many of us are satisfied with the intel built in Graphics processor?
  • clyman - Tuesday, November 26, 2013 - link

    So far, it meets my needs just fine. I am sure it would meet the needs of all my customers. I did put a fluid filled cooler on the processor, but that was only needed while running OCCT. I will add a video card should i ever need one. Reply
  • clyman - Tuesday, November 26, 2013 - link

    I have the ASUS Z87-PRO mobo and was hoping someone had a few answers here for me, haven't seen anything related though. My problem is that no matter what I do, the multiplier will not go above 39 and I cannot find out why. Is that due to having 1600 MHZ memory?

    Another issue is that when I update AI Suite 3 from the original on the supplied CD, it will not recognize my WIFI Engine adapter, however it finds it with the original. ASUS techs have been useless on both of these points as they say have no information regarding overclocking and no one has a clue about the WIFI Engine. I have been given all kinds of advice, all fruitless. I can't get them to understand it simply will not recognize the device on the updated version. I think it is a bad update, they want to RMA it.

    Any help on these issues would be appreciated.
  • LoCk3d - Friday, December 20, 2013 - link

    A problem encountered someone USB Charger + function? I do not detect the device, I enabled ERP in bios but still does not work. Help me please ! Reply

Log in

Don't have an account? Sign up now