SilverStone Sugo SG08 Mini-ITX Case Review
by Dustin Sklavos on May 13, 2013 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- Mini ITX
- SilverStone
In and Around the SilverStone Sugo SG08
If you review computer hardware for long enough, your relationship with aluminum becomes a fairly complicated one. Review cases and you start learning all kinds of crazy things about building materials, eventually developing your own preferences. I'm pleased to say that this is one thing SilverStone continues to do very, very right.
There isn't anything especially outlandish about using a brushed aluminum fascia with an SECC steel chassis and shroud, but SilverStone opts to use thick material in the construction of the Sugo SG08. The front fascia is 10mm aluminum while the external shroud is exactly the right thickness of steel to be flexible enough during reassembly without being chintzy or overly fiddly. SilverStone's aesthetic with the SG08 is tame and effective, with a completely flat, unventilated front followed by a veritable mountain of ventilation on the top and sides. Interestingly, there's virtually no ventilation on the rear of the case; I suspect this is a deliberate choice to channel air as directly down to the CPU as possible.
Instead of thumbscrews, the SG08 has three standard screws that hold the single piece shroud in place. Remove that, and you're left looking at one of SilverStone's classic puzzle boxes.
.jpg)
While the interior of the SG08 is fairly intimidating at first, there's always a logic to SilverStone's designs. Like a good sandwich, a "stacking order" must be adhered to. At the top of the case are the intake fan bracket and the slimline optical drive tray. Remove those and you have access to the motherboard tray itself and the storage drive cage. Remove the drive cage and you're left with the preinstalled power supply. It should come as no surprise that interior real estate is at an absolute premium, yet what's perplexing is that SilverStone opted to install the reset button on the back of the case. Leaving it in the front where it typically resides, even recessed, would've been much more ideal, as you now have front panel headers crossing essentially the entirety of the interior.
_thumb.jpg)
_thumb.jpg)
_thumb.jpg)
_thumb.jpg)
_thumb.jpg)
_thumb.jpg)
There aren't really a lot of surprises when it comes to the Sugo SG08. I like the aesthetic overall; it's simple but effective and won't look out of place. It's easy to be intimidated by the internal layout and you can tell almost immediately that closing up is going to be a pain, but when you get down to an enclosure this size, a lot of sacrifices are going to be made. Could the design of the SG08 be simpler? Probably, but how much so I'm not really certain.
Facebook
Twitter
RSS
50 Comments
View All Comments
gandergray - Monday, May 13, 2013 - link
The NCase M1 looks like it is well designed. It may become a top choice for enthusiasts who are building small form factor performance oriented computers.Mr Perfect - Monday, May 13, 2013 - link
Any idea if the included PSU is Haswell compatible?Also, side note here, but didn't there used to be a post title box?
karasaj - Monday, May 13, 2013 - link
I would be astounded if it wasn't.DanNeely - Monday, May 13, 2013 - link
A lot of current PSUs aren't. Haswell is bringing ultra low power sleep states from mobile computing to the desktop. This potentially drops 12V current draw to levels much lower than was possible with current chips, and a lot of PSUs have minimum loads higher than what it can drop to (to make things more fun; this number isn't normally published). The expectation is that most LGA1150 mobos will ship with the deep sleep states disabled in UEFI.rburnham - Monday, May 13, 2013 - link
This is a pretty neat little case. I am using a Bitfenix Prodigy case, and the one problem I ran into with that is the same one that is mentioned here regarding video card fan noise. In both cases, the fan points outward, with air being pushed through the holes in the side panel. My Radeon 6850 in the Prodigy is louder at full load than I prefer.I love the idea of a mini ITX setup. I plan to build on mini ITX boards going forward. I have yet to find the perfect case, but the Prodigy is pretty good and the SG08 seems like a great candidate.
KLC - Monday, May 13, 2013 - link
This isn't a PC case, with all of the ventilation it's more like a PC doily. I'm still looking for the best case for my next build which will be mini ITX. It will be Haswell and will run integrated graphics so I have no need for a big, long shoebox that can fit a monster GPU. It could have an optical disk but doesn't have to. It will have an OS SSD and be connected to a home server for storage. I want something small and quiet. Still looking.jtd871 - Monday, May 13, 2013 - link
KLC,You should check out Thin-Mini-ITX or NUC (both Intel "standards") builds for what you describe. As lots of Haswell SKUs will be soldered onto the mobo, I suspect Intel will produce a variety of 'embedded'-style products to keep their "standards" going.
However, given Intel's penchant for squeezing every last $ out of their processors, you may be better served by going with one of these very small form factors on low-TDP Ivy Bridge.
KLC - Monday, May 13, 2013 - link
NUC is intriguing, but like you said, Intel is squeezing its customers hard on that one. I forgot to add a third qualification, it needs to accept standard sized parts so I can purchase anything on the open market. You're right, I may end up with an Ivy Bridge CPU after looking at what Haswell offers.lordmocha - Monday, May 13, 2013 - link
This is my case! I have an Asus P8Z77-I Deluxe, Asus Direct CU II 660, 2.5" SSD, 2.5" HDD, Corsair H60 Cooler with 2 Noctua 120mm.The case is dead silent with the nocuta fans and the direct cu ii. The cable management can be annoying and buying a modular psu to replace it is nice but then you'll have a wasted psu..
I think the M1 Ncase looks great and plan to migrate to that when it comes out - support their kickstarter guys cause what they are managing to do is awesome!
lopri - Monday, May 13, 2013 - link
Excellent review very clear writing. Thank you for valuable evaluation I was looking to give another shot at mini ITX build.