Component Selection and Build Quality

The skeleton of the Genesis, Corsair's Obsidian 800D follows in the footsteps of Corsair’s other Obsidian cases. It may only be a full-tower ATX case, but there are few words to describe it other than “beastly.” The 800D is built out of a mix of aluminum and copious amounts of steel, making it heavy and strong. And did we mention it’s big? Among the 800D’s more spacious accommodations is a backplane-driven 3.5” HDD hot-swap cage that orients the hard drives along the length of the case rather than the width. Origin of course puts all of this space to good use; the case’s 5 5.25” bays are all filled with drives, card readers, water reservoirs, and fan controls, while the internals house the liquid cooling setup and components, while still leaving plenty of room to allow for neat & tidy cable routing.

Once inside of the 800D, it’s hard to miss Origin’s “Cryogenic” liquid cooling loop that occupies much of the internal volume. With upwards of 1200W of heat to absorb and expel, Origin has outfit every single fan mount with a radiator setup in a push-pull configuration. Altogether there’s 1 140mm radiator at the bottom intake, another 140mm radiator at the rear exhaust, and another massive 3x120mm radiator at the top exhaust that has been reversed to serve as another intake. This entire loop is then hooked up a coolant reservoir, and of course the blocks that cover both the CPU and the GPUs. On that note the fact that Origin was able to get blocks for the Titan in time for its launch is something of a marvel on its own; EK Water Blocks apparently put those blocks together on a very short turnaround.

All of that cooling hardware is of course necessary if you want to cool three overclocked Titans and a heavily overclocked CPU at the same time on a single loop. The CPU itself, an Intel Core i7-3970X, has been massively overclocked from 3.5GHz to 4.9GHz (ed: Origin’s factory overclocking service doesn’t guarantee any specific clockspeed, but rather a range of 4.5GHz to 5.2GHz depending on what the CPU will do). This required 1.485v to achieve, making liquid cooling an absolute necessity for this Genesis system, as power consumption (and heat output) by our reckoning more than doubles to over 300W. A voltage over 1.4v is unusual for a SNB-E processor, but our in-house overclocking guru, Dr. Ian Cutress, tells us that even a voltage this high is safe due to the use of water cooling.

The other half of the cooling is of course for the Titan video cards in this system. As a crème de le crème system Origin has also overclocked these GPUs – something that’s easy to get away with since the liquid cooling will keep temperatures well into the safe zone – pushing them from 837MHz to 952MHz for a 115MHz (14%) core overclock, while the memory clockspeed has been increased by 400MHz (7%) from 6GHz to 6.4GHz. With temperatures held under 70C due to the water cooling, the speed of these cards is ultimately held back by what the GPUs can clock to on stock voltages, along with NVIDIA’s 106% (265W) TDP limit.

Moving on to the Genesis’ storage system (practically the only thing not liquid cooled), it is composed of a pair of 120GB Corsair Neutron GTX SSDs organized in RAID-0, and a Western Digital Caviar Black 1TB for higher capacity storage. The use of 2 120GB SSDs instead of a 240GB drive is something of an odd choice; RAID-0 improves raw read/write performance much better than a denser SSD, so the Genesis can push more than 600MB/sec sequential read/writes. But because this is an X79 platform, this means we’re using Intel’s RSTe drivers that don’t support TRIM in RAID. So maintaining drive performance is reliant on LAMD’s garbage collection routines.

Rounding out the system, Origin throws in a Corsair AX1200i as the system’s PSU, and the optical drive is a 14x LG Blu-Ray/DVD burner. Origin also throws in a few accessories, split between functionality and sheer looks. On the functionality side, the top and rear fans are hooked up to a 4 channel Lamptron analog fan controller mounted into one of the 5.25” bays, allowing those fans to be turned up and down as necessary. As for looks, along with the blue tubing for water cooling, the case is also equipped with remote controlled multi-colored (RGB) case lighting system, allowing the inside of the case to be lit-up in practically any of the major primary/secondary/tertiary RGB colors. Meanwhile on the outside, our sample system also comes done in one of Origin's most intricate paint jobs, their aptly named "shreader blue".


"Shredder Blue" paint job; the scratch was our idea

Taken in altogether, sometimes I forget just how well built a good OEM/boutique system can be. Not unlike Anand, I’ve typically always built my own PCs; so even with the occasional repair jobs for friends I rarely see a truly well built system. Origin takes full advantage of the 800D case, and for the most part the only cables you’ll ever see without very close examination are the PCIe power cables for the Titan cards themselves. Every cable has been neatly tucked away, and the liquid cooling tubing cut such that there’s no more slack than is necessary for any of the bends. The build quality is of course greatly helped by the solid feeling of the 800D case itself, which being composed mostly of steel is extremely durable and clearly won’t be getting loose or otherwise falling apart anytime soon.

With that said, this Genesis is clearly a set it and forget it computer. The water cooling system and tight cabling means that modifying the case or otherwise expanding it beyond adding hard drives is difficult at best. Even adding RAM would require at least unmounting a radiator to access some of the DIMM slots, while much more than that would require draining the system. Of course with 3 Titans occupying all of the available expansion slots there’s not much more you could do anyhow. Ultimately the Genesis is a complete system meant to live out its life as-is – the 70lb+ weight of the system means that owners won’t want to move it anyhow – with the only real work left being the periodic refill of the reservoir.

Finally, Origin offers a few different warranties with the Genesis. All of the warranty options involve lifetime labor and free 24/7 support; the difference is how long the parts are warrantied for, and whether shipping is included. The base warranty is 1 year on parts and 45 days on shipping, followed by full 1 year ($70), 2 year ($170), and 3 year ($270) warranties. Frankly given the sheer weight of the computer any option that includes shipping should more than pay for itself if something does happen. Coupled with the fact that this is an open loop water cooling system, there’s a very strong incentive for grabbing an extended warranty.

Origin's Genesis Application and Futuremark Performance
Comments Locked

63 Comments

View All Comments

  • sticks435 - Wednesday, April 24, 2013 - link

    I agree with some other replies, they should have waited and used the 900D and also used thicker rads. That's the reason the fans have to be turned up so high. Those look like 35mm rads, which probably have a high FPI count (20-30) is my guess. If they had used thick 60mm rads, they could have turned the fans down much lower or only used 1 set and got the same or better temps at lower noise. Dual loops would have also helped, but at that point you might as well do it yourself lol.
  • rohini - Wednesday, April 24, 2013 - link

    oh God!
    What the hell will you do with such a config? You're wasting power nothing else. Even a single Titan is more than sufficient for all the latest games let alone the 3 way SLI.
  • Silma - Thursday, April 25, 2013 - link

    For $9k I'm not expecting a 51dB loud computer but rather about 35dB.
    I have a loud computer with otherwise perfect specs and boy I am looking forward to the next one which will be silent as a priority.
    Also 240GB SSD is absolutely not enough, for the price I'm expecting 480GB at the very least.

    Otherwise it looks like a great PC.
  • ChuckyDB - Thursday, April 25, 2013 - link

    Honestly, the cooling is clearly poor for that price.
    That crazy overclock sure is heating up the water, but not like those power hungry Titans.
    I have seen on a forum a dude with 2 Titans on water at around 40C.
    This build, with the cards being at 66C, that means the water is quite hot. No wonder the cpu is going over 80. For a build of this magnitude, it is quite sad.
    For cooling that CPU, I would have taken 2 radiators because of that overclock, and 2 radiators for each GPU to keep that water temperature down. That's 8 radiators total. 5 isn't enough for a single loop.
    Personnaly, I would have either:
    1) Made a double loop, that way the gpus could have heated the water all they wanted on their side and the cpu would have had more breathing space.
    2) Or, if I'm not mistaken, that looks like some Koolance quick disconnect plugs around the gpus. http://koolance.com/help-quick-disconnect-shutoff-...
    That means we could easily add a radbox on the back and get 3 more radiators in that system. http://koolance.com/radiator-mounting-bracket-with...
    That would give a much better thermal performance, and mabey give the chance to keep the fans a low speed at all time. Sure it looks ugly, but someone who can do it should in my opinion.
  • dishayu - Friday, April 26, 2013 - link

    This system has more frame buffer than RAM. :|
  • chazh - Friday, April 26, 2013 - link

    this is 8K stuff. beastly mainly. it must be targeted the enthusiast gaming user.
    with those triple titans it seem the motherboard is not quite match.
    otherwise, maybe maximus v extreme will be a wise choice.
    and without a discrete sound card..well i feel something missing in this rig.
  • wshawn - Saturday, April 27, 2013 - link

    Let me buy a server and a couple of I7-3xxx systems and a decent laptop. I'll probably still have money left over. There isn't $9k worth of anything here.

    "These aren't the droids you're looking for. Move along."
  • Conficio - Sunday, April 28, 2013 - link

    +Ryan are you susing a DSLR type camera? If so you can reduce the glare and reflections on the cases by buying a polarization filter and using it accordingly. Would make great reviews even better!
    Thanks for your hard work.
  • fuzz111111 - Tuesday, April 30, 2013 - link

    Are you sure it was the CPU holding some games back? Nvidia cards, without a patch, run at PCIE 2.0 on X79, and this apparently bottlenecks SLI setups:
    https://forums.geforce.com/default/topic/516811/ge...
  • UltraTech79 - Tuesday, April 30, 2013 - link

    Really? $9000 and they put fucking TITANs in there?

    Morons.

Log in

Don't have an account? Sign up now