Nanoxia Deep Silence 1 Case Review: You Asked For It, You Got It
by Dustin Sklavos on November 27, 2012 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- quiet
- ATX
- Nanoxia
Testing Methodology
For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| ATX Test Configuration | |
| CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
| Motherboard | Gigabyte GA-Z68MX-UD2H-B3 |
| Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
| CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z68MX-UD2H-B3 motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
Facebook
Twitter
RSS
75 Comments
View All Comments
Dustin Sklavos - Tuesday, November 27, 2012 - link
I think there's a reasonable chance the R4 would be much more competitive, either with Nanoxia's fans or with a pair of 140mm be quiet! fans on the intake.The issue the R4 runs into, for me at least, is that it has virtually no clearance in the top for a radiator. What they need to do is what SilverStone did with the Temjin TJ04-E; shift the mounts towards the left side of the case to clear the motherboard.
ImSpartacus - Tuesday, November 27, 2012 - link
You guys not only keep your review samples, but you give them to your friends!? I thought it was good form to give away review samples if you have no long term use for them (except in a test bed or something).I feel like I misinterpreted this comment. Could you clarify the policy on what happens to review samples after a review goes up?
Grok42 - Thursday, November 29, 2012 - link
My company reviews products completely unrelated to computers. We footnote what we did with each sample at the bottom of the review. 50% of the equipment we send back at the request of the manufacturer. Of the other 50% we give away about 40% to our readers. I will say that giving them away takes a lot of time and expense. This is why 10% ends up going to internal staff or in a broom closet. I will say that when you review a lot of equipment you completely lose any sense of cost in a weird way so I wouldn't worry too much about it influencing a reviewers review. You still put yourself in the place of a customer when evaluating value but in your mind that $500 piece of equipment is worth $0 since you have 40 similar ones lying around collecting dust.Grok42 - Thursday, November 29, 2012 - link
Gunmetal finish?! Did I miss that in the review? I see they have white and Silver too but I think the Gunmetal is the best. The contrast of color makes it look a bit less German. I didn't think I'd be interested in owning a case like this but I have to admit I want one now. Certainly will keep it in mind for my next server.dawp - Tuesday, November 27, 2012 - link
I have a couple of fans (the fx-1250) that are are dead silent on low and are quite on high, they seem to be good fans but one interesting marketing ploys is that they will run submerged in water. if you look on youtube you can find several vids of them doing that.I got them at crazypc
dawp - Tuesday, November 27, 2012 - link
no edit: the model is fx12-1250SilentRunning - Tuesday, November 27, 2012 - link
This is a case that appeals to me on many levels. But what it appears to lack is any ventilation for the upper half of the front. I always put hot swap bays in and some ventilation is a must.FRUNOBULAX - Tuesday, November 27, 2012 - link
After so many rigs for which I paid pros to assemble, the Nanoxia DS1 was my choice for the first system to build from scratch with my own bare hands (figuratively, of course; but I did indeed not need my screwdriver often). While I did experience most of the issues mentioned (except the sticky I/O hinge at the top), I found none of them difficult to overcome, and the end result is sheer beauty. The combination of price and performance, I was simply wowed.What then really made the case an outstanding experience as a customer was the result of an inquiry I had sent them (some newbie question on audio headers and power switch connectors). I mailed it off on Sunday night from their website. I received the most friendly, competent and comprehensive answer I have yet received (in such combination) from a manufacturer or vendor, on Monday, 9:18 am.
Should I ever need anything in the future that is also available Nanoxia, you bet they'll be my first choice.
(Let me mention I'm German, yet I hold myself to have no tendency to fawn, or favor German products for nationalist considerations)
stratosrally - Tuesday, November 27, 2012 - link
Go to http://www.nanoxia-world.com/ to see more details about the DS2 (and the DS1). Seems to be a misconception here that the DS2 will be the improved version of the DS1 - it's actually a simplified and smaller case.It's a midtower, has 7 expansion slots, 165mm CPU clearance, no chimney up top (just 2 fan mounts), a single large HDD cage, and USB/audio on top that is not hidden. It seems to me that the main item of interest is that it will accept a 240/280mm radiator mounted to a bracket behind the 3.5" bays - or an additional pair of fans.
BTW - sure seems to me that all 3 HDD bays are removable on the DS1, Dustin.
araczynski - Tuesday, November 27, 2012 - link
can't say i'm impressed, not sure why everyone's still using those ancient drive cages/sleds. especially in a case that focuses on efficiency. a smarter solution would be 4 independent vertical rails, just wide/thick enough to be rigid.