Assembling the SilverStone FT03 Mini

As I stressed over and over again in the previous section, assembly of the SilverStone FT03 Mini is a very specific process and you really do have to follow the instruction manual to the letter. With that said, however, I was surprised at just how easily the build came together. There were places I struggled with the FT03, but the Mini was a remarkably simple affair for a Mini-ITC case, all things considered.

When you get started, you want to tear down the case completely per the instructions, because you'll be putting it right back together the same way. The motherboard tray includes the standoffs needed for Mini-ITX, and the board itself goes in easily enough. I also cabled the motherboard at this juncture, but wasn't able to pre-install power cables; our test PSU wasn't modular, although SilverStone is actually going to make a modular SFX power supply available in the near future that should be ideal for cases like this one.

The next step is installing the power supply, which suspends from the top of the case. Since it's an SFX power supply the weight isn't a major issue (and the frame of the case can definitely handle it), but SilverStone seems to have been a bit miserly in the number of screws they included with the FT03 Mini. There are five points to screw in the PSU, but there were only enough screws available to do the four corners. You can see the specific way the power cables are supposed to tuck into the enclosure, though, and this was a good time to get them connected where possible.

Where things do get tricky is the optical drive tray and associated 3.5" and 2.5" cages. There's an additional 2.5" cage mounted to the motherboard tray that can be removed but we opted not to use it, instead employing the "stacked" trays for the 3.5" and 2.5" drives that sit under the optical drive tray. The problem is that it's never 100% clear how these trays come together, but the key is to look for the three notches that the 3.5" tray uses to slide into the bottom of the 2.5" tray. Once you've installed a slimline drive (or not), you can replace the optical drive tray. Mount the 2.5" tray to the bottom of the optical drive tray, then mount the 3.5" tray to the bottom of the 2.5" drive tray using the notches. Everything screws into place. Take care to orient the drives properly to make cabling as easy as possible.

Finally, installing expansion cards is actually one of the easiest parts. The case is designed to accept the expansion cards last, and I was able to squeeze our Zotac GeForce GTS 450 Eco into the FT03 Mini without too much trouble. I will say that I'm still not a fan of having to remove a cover from the expansion slots before removing the slats from the slots themselves to install the card, but I'm also not sure if there's any other way to really handle it, especially with a case like this one.

With all the doors snapped back on in the proper order, the FT03 Mini is ready to go. There's even a small notch under the case's I/O for routing the power cable out the top of the case. It might seem a little sloppy to have all of the cabling spilling out from a single point in the top of the case, but that's how the original FT03 worked and as I mentioned before, you'll already know if the FT03 Mini interests you just by looking at it. That it comes together pretty easily is almost secondary to that fact.

In and Around the SilverStone FT03 Mini Testing Methodology
POST A COMMENT

67 Comments

View All Comments

  • ikjadoon - Wednesday, May 23, 2012 - link

    http://www.maingear.com/custom/desktops/potenza/ga...

    This might help...but it's just one shot. :(
    Reply
  • terragb - Thursday, May 24, 2012 - link

    They are using a CPU water cooler in that shot which makes it look like there is much more space than there is with an air cooler. Reply
  • terragb - Thursday, May 24, 2012 - link

    Hey friends,

    So I know I'm a bit late to the party but I'm actually using the FT03-Mini right now with an i7-3770 and a GTX 680.

    For the record, assembly with a 680 becomes a completely different situation. Yes, there is physically enough room inside the case for the 680 but actually getting it in place is very difficult. I had to follow a completely different assembly order than recommended and actually had to unscrew the front grill/port cover/mounting bracket from the GPU to squeeze it in and then screw the front grill back in place with it lodged inside the case.

    I have pictures of the build that I need to find time to upload but I'll try and answer questions if anyone has any.
    Reply
  • mcbowler - Friday, May 25, 2012 - link

    So how do you like the set up? This seams ideal to me. Reply
  • terragb - Tuesday, May 29, 2012 - link

    I'm really happy with it. I really like the unique vertical orientation of the case. I'm still seeing how hot the video card runs since its definitely a little airflow starved given the GPU intake fan is only a few millimeters from the side panel of the case. Reply
  • ggathagan - Saturday, May 26, 2012 - link

    That's odd.
    Is the 680 a reference-based design or does it have a custom cooler like the MSI Twin Frozr?

    I used an EVGA GTX670, which is the same size as their 680 as both are reference design. I didn't have to do anything to the GPU.

    Yes, it's tight, but you can get the GPU in after everything else is installed and running.
    I did some testing with the built-in graphics before installing the 670.
    When I installed the card, I didn't have to do any more than take off the panel with the optical drive slot.
    And it didn't take any kind of forcing.
    That GPU size struck me as almost being made for the case.
    Reply
  • terragb - Tuesday, May 29, 2012 - link

    Its an allegedly reference Galaxy GTX 680. Honestly if it were only a few millimeters shorter it would have fit in without all the effort. Reply
  • Salem - Friday, June 15, 2012 - link

    I'm about to order everything, but when it comes to CPU cooler, I just realized there doesn't appear to be any room for the radiator from the Corsair H60 on the bottom while having a 10" video card like the GTX680 or 670. Does this sound right to you? How are you cooling your CPU?

    I have a spare Noctua C14, but there's no way that'll work in this thing.
    Reply
  • methudman6 - Friday, May 25, 2012 - link

    Where the heck can I buy this in the US? I can find only one Canadian retailer online called Sundial Micro. Reply
  • ggathagan - Saturday, May 26, 2012 - link

    Sundial is where my friend bought his.
    They're in California, not Canada.
    CA as domain name is Canada. As an address, it's California
    Got it quick, and the whole process was trouble-free.
    Reply

Log in

Don't have an account? Sign up now