SilverStone Grandia GD07 Review: Centering and Serving Your Media
by Dustin Sklavos on April 29, 2012 1:00 AM EST- Posted in
- Cases/Cooling/PSUs
- HTPC
- SilverStone
Testing Methodology
For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise. Again, note that while the GD07 can technically fit a full-size ATX motherboard, it's not tall enough to allow for our testbed's tower cooler. Because of the discrepancies that would make for in testing, plus the fact that media center cases are often mini-ITX designs, we have chosen to use our mini-ITX testbed rather than going with a specialized (e.g. not something you can compare directly to our other cases) ATX build.
| Mini-ITX Test Configuration | |
| CPU |
Intel Core i3-2120 (65W TDP) |
| Motherboard | Zotac Z68ITX-A-E |
| Graphics Card |
Intel HD 2000 IGP Zotac GeForce GTS 450 Eco (dedicated) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
| Accessories | Corsair Link |
| CPU Cooler | SilverStone NT07-1156 with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i3-2120.
- Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply and NT07-1156 heatsink/fan combo.
Facebook
Twitter
RSS
37 Comments
View All Comments
randinspace - Monday, April 30, 2012 - link
Dustin, I enjoyed the review, and in particular think you absolutely hit the nail on the head with your conclusion that the system has a lot of potential. I'm left wondering if it has a bit too much potential in place of realized excellence since I would personally have appreciated better cabling options, a fan controller that actually worked, and a straight out dedicated hot swap bay, but the headroom (and accompanying theoretical lack of expense from such inclusions) must only make it more attractive to boutiques like the very Puget Systems mentioned in passing for providing the i3 used in the review.I bring them up mostly since I recall reading a case evaluation they did last year, though unfortunately not the case, in which they mentioned that because of some of the design choices that were made in order to make it "toolless" they didn't trust it to survive shipping with a fully installed system in it. I personally find Puget to be a little too conservative in various ways, but considering that and their willingness to make their own modifications to cases I can at least imagine how a toolless version of the GD07 with grilles on the fans might be an unappealing prospect to an outfit like them. Then again it's not like they actually have a product line the GD07 seems to beg inclusion in (yet?).
As to the "controversy" you alluded to at the start, I don't expressly have a problem with the fact that you used the mini-ITX testbed instead of the (micro) ATX one with a different cooler. However, with the present lack of apples to apples comparisons in the charts, I think the review would have been better served with additional anecdotal comparisons, or even testing out additional fan configurations like some people have been clamoring for. Pulling the fans and maybe even a drive or two out of your own GD05 and then taking the noise and thermal readings again (or even doing noise readings on your GD05 as it usually runs for the aforementioned anecdotal comparison) for instance would have been absolutely brilliant. Then again if you give in to a dog begging for food from the table even once...
Hulk - Monday, April 30, 2012 - link
17" depth is simply too much for most entertainment centers once you figure in stiff HDMI cables. I'm using the GD04 which Anandtech rightly criticized for the loud fans. All you have to do is reconfigure the power leads to the fans so they are running off the 5V rail and voila, it's quiet. Takes about 1 minute and costs nothing. And the cooling of the three 120's is fine for a low power HTPC. In fact I'm running mine that way with a C2D at 3.0GHz no problem with the stock cpu cooler.PhoenixEnigma - Tuesday, May 1, 2012 - link
Agreed on the depth - my GD04 is about as deep as I'd want a media center case to be. 17" is ridiculous, IMO. It's at the point I'd be setting it on its side (tower case style) beside everything else, which sort of defeats the point.One tip - you can get around the HDMI cable (and most other cables, for that matter) issue with angled connectors, or possibly Redmere cables.
zlandar - Monday, April 30, 2012 - link
I have a Grandia GD06. Not sure what the point is of making a case large enough to support ATX boards. As the reviewer pointed out, a major problem with this case style is the lack of height to support a tower-type cooler. There is a 18mm of additional height compared to the GD06 I have, but most tower coolers require 150mm+ which this case is short by 12mm. You can go with a low-profile cooler like a Gemini 2 but the performance will never match a cheap tower like a Hyper 212+.Depending on your HTPC usage you can use a stock cooler and be happy. I use my HTPC for commercial skipping (DVRMStoolbox and showanalyzer) and for transcoding to my iPad (Airvideo) which will take as much cpu as you have. My i3-550 runs fine with a slight overclock to 3.6GHz.
Would also prefer these type of cases come with a fan controller.
Death666Angel - Wednesday, May 2, 2012 - link
I had not problem with my Silverstone LC10B-E. It could fit a tower CPU heatsink just fine and was pretty quiet. You seem to think there are really only about 3 options, which is ludicrous. Tons of CPU heatsinks of various designs fit in those ATX desktop cases quite easily and can cool even overclocked quad cores. My i3 530 ran with the aforementioned tower cooler (cheap Arctic Cooling 64 or something) at 4.5GHz. When I used a Lian Li Cube (V351-B) I had a Noctua NH-C12P, which is just under 12cm with the standard fan (you could always use slims) ,I had my i7 860 running at 3.5GHz just fine. :-)So don't be so narrow minded. Lots of options to choose from in every height and cooling segment. :D
mcnabney - Monday, April 30, 2012 - link
The purpose of this box is to hold an ATX-sized board which provides the extended number of slots and drive connectors to completely populate the case as a home/media server. It has made some mistakes along the way.1. It should have been built 'up' instead of 'out'. It is just too deep. I had to modify my entertainment center for a similar design four years ago. You would have thought that the engineers would have corrected that issue by now.
2. By being too thin you noticed that it wouldn't hold many CPU coolers. This also eliminates the ability to silently cool a CPU - a colossal mistake. Living room PCs shouldn't be making noise.... at all. Small HTPC cases can do it, why not a larger one which should have more options.
3. The drive cage design is stupid. If they are going to provide groups of 5.25" drives they should put them in groups of 3 and also include 3to5 adapters to allow their use in holding 3.5" drives.
4. The best design for the cage would include a thin area across the top that is designed to hold the two 2.5" SSDs AND a slim DVD/BD drive. This would allow the rest of the space to be dedicated 3.5" drive space for storage.
5. There may be ventilation issues for the hard disks. Have you tried filling the case completely with drives (and put them in an array so that activity spins them all) and checking the drive temps? The board looks adequately cooled, but the drive cage looks like a pit of dead air.
mmsmsy - Monday, April 30, 2012 - link
I don't know how PC enclosures could stay pretty much the same for so long when they can be totally reinvented to be less noisy, have less wasted space, be much better ventilated and be much, much, much cheaper. This is getting frustrating since I can't buy literally anything neither to my PC nor a PC to the living room that wouldn't be a complete waste of money, because every single one of them is basically the same and begs to improve it's design. There's only so much to do about it as to build one myself... if I had any skills in bending and cutting metal. Ridiculous...xpeacemaker - Monday, April 30, 2012 - link
Thanks for the review -- I was excited to see a review of this Silverstone's latest product. I own a GD04 and love the look and quality of it. My biggest gripe for the case is that it's obviously cramped and a nightmare to do maintenance on.As time went on, my need for hard drive space has increased in priority, yet physical room inside the case is not available (GD04). In addition, I have a sound card that I would love to add to take over the primary responsibilities of sound output, but I can't because with a 5770 in there, there just isn't any room for it.
I would love to see how this case stacks up compared to the GD04 in detail (since this is a newer model). I am most curious to know, what can I fit in here more comfortably that I couldn't do before? How much hardware can I actually stuff in here without modifying the case? How many hard drives were you able to actually install and wire up completely?
I would have liked to see what you meant by the clearance issues you encountered with the 2.5" drive install.
Sorry for the critical feedback. All that being said, I do appreciate your review.
Stabgotham - Monday, April 30, 2012 - link
Yes, please answer all of these questions. These are the exact questions coming to my mind as well. I'm in the market for an HTPC case, but I really need it to store the physical hard drives (5 x 3.5" HDD's).I'd also really like to see some future reviews of some of the Lian-Li HTPC cases as comparison.
zlandar - Tuesday, May 1, 2012 - link
I keep my hard drives in a separate Sans Digital enclosure. I use four 2TB drives in a RAID 5 connected to my HTPC through eSATA.