Fusion E-350 Review: ASUS E35M1-I Deluxe, ECS HDC-I and Zotac FUSION350-A-E
by Ian Cutress on July 14, 2011 11:00 AM ESTOn the outside, this Zotac Fusion board mimics the view I see in almost all of Zotac's product range - mini-ITX, jam-packed full of features, and for a little price premium. Some of this is true - the FUSION350-A-E has a Cooler Master designed passive cooler, SO-DIMM memory to improve space on the board, and a Wifi card with a pair of antenna. For the most part, however, I've found this board has underperformed. In terms of performance, it's nothing spectacular (or worse than the rest at times), and doesn't offer anything significantly different. It needs a fresh injection of BIOS and software, as well as more robust controllers to become a more desirable product.
Visual Inspection
On the front of it, looking at the Zotac board and seeing such a small cooler compared to the ASUS board can be a bit puzzling. On show are the obvious copper heatpipes, and a Cooler Master logo, showing the joining of the two companies to produce the passive heatsink. Along the top sports a USB 3.0 header, a CPU fan header (a chipset requirement, even if it is a passive solution), and the two SO-DIMM memory slots.
Along the right hand side is the 24-pin power connector, the clear CMOS jumper, a 4-pin system fan header and the front panel connectors. Nothing too out of the ordinary here, though there is space to put the SATA connectors here rather than above the open ended PCIe x4 slot.
The open ended PCIe x4 slot is essentially what a PCIe x16 slot is when it is in x4 mode. So there is scope to add some GPUs here. Above this are the four SATA 6 Gbps connectors and the mini-PCIe wifi card, which is hooked into the antenna holders on the I/O panel automatically. The board also sports a COM header, a USB 2.0 header, a SPDIF out header, and the front panel audio header, all in the corner around the PCIe x4 and the I/O panel.
Nothing too different on the I/O panel compared to other models, except the USB 3.0 ports powered by a VIA controller are directly below a legacy PS2 port. This motherboard supports HDMI, DisplayPort and DVI from the onboard connectors (VGA requires a converter). Alongside four USB 2.0 ports is the eSATA 3 Gbps, a gigabit Ethernet port, 8-channel HD audio and an optical SPDIF output.
Facebook
Twitter
RSS
67 Comments
View All Comments
ET - Saturday, July 16, 2011 - link
Here are a few links to E-350 reviews using a desktop PSU. Not a comprehensive list by any means:http://www.guru3d.com/article/amd-brazos-platform-...
http://www.overclockersclub.com/reviews/sapphire_f...
http://www.xbitlabs.com/articles/mainboards/displa...
http://www.eteknix.com/motherboards/jetway-nc85-e3...
http://www.tweaktown.com/reviews/4093/asus_e35m1_i...
And of course Anandtech's first review of the platform:
http://www.anandtech.com/show/4134/the-brazos-revi...
ET - Friday, July 15, 2011 - link
In the conclusion you say about the ECS: "Having 33% free of anything is usually a good idea, so when it comes part of the package with very little increase in power consumption, it is a good thing. As a result, all the benchmarks and all the games had much, much higher scores than the other boards we tested."Unfortunately these gaming performance figures don't appear in the article. This looks like an oversight that needs to be corrected.
Mitalca - Friday, July 15, 2011 - link
I second that.Through the review there's a lot of times when Ian talks about the marvell the ECS did with the 33% OC. Then why you didn't show the results?
One of the bigest flaws in this review, that make a lot of people suspect of a way-too-much-biased review.
Testing with a 580 is ridiculous, even if you want to "provide a plausible maximum ceiling". I spend $500 and I only get 50% more frames. What about a U$ 50-100 gpu?? If the CPU and the memory are by far the bottleneck, we should see similar results.
And, once you show the huge benefits that overclocking does to the iGPU, why not try it with the dGPU?
ET - Saturday, July 16, 2011 - link
The main thing I would like to see added to the discrete GPU test is an AMD GPU. The CPU usage of NVIDIA and AMD drivers are different, so results may be different.I don't think that a discrete GPU is worth using with the E-350 in any case, and the test with the GeForce 580 pretty much proved that. It's just too CPU limited.
xorbit - Friday, July 15, 2011 - link
This review is a steaming pile. At least it lends credibility that Anandtech might not be biased, just woefully incompetent.An HTPC review without HTPC benchmarks and coupling the chips with impropper PSU/GPUs.
silverblue - Friday, July 15, 2011 - link
Without wanting to start a huge squabble, if you guys think you could do better...lestr - Friday, July 15, 2011 - link
Tom's already did: Daily Hardware 7/6. 8 boards with more relevant tests though somewhat incomplete.My big question is: WHAT is AMD afraid of? SUCCESS? AMD fanboy but when they could really kick a** they give us another "almost".
Another question: Does the PCIe slot support anything other than graphics? Can I stuff a Hauppauge 2250 or a Ceton card in it? This is totally ignored on almost ALL current ITX boards. You're about as likely to win the Kentucky Derby with a 3-legged horse as playing any games on this platform. What's the point?
The E450 (1.65 / 1333 / HD 6320) is due out any time. Standards on this platform should include 6 audio outs (hello Asus!), mPCIe, fp USB3.. how about DUAL channel memory? What's a few more watts anyway? Is 35W APU too many? RAID?
I wish AMD would pull out all the stops and do this little thing right.. entice the partners as well. If they can't do anything else but bury Atom/NV ... AMD needs to win something sometime.. why not NOW?
Any comments, Ian?
mino - Friday, July 15, 2011 - link
Brazos is sigle channle.There are 35W Llano E2 series APU's on the way.
Brazos is SOLD OUT for 3 quarters allready ... talk about AMD being afraid ...
medi01 - Sunday, July 17, 2011 - link
Idiot detected.Wander7 - Friday, July 15, 2011 - link
Just by looking at the two heatsinks and not doing any measurements, it looks like the Asus' heatsink is suffering from air stagnation because the fins are too close together....