Once Again The Card They Beg You To Overclock

One of the 5970’s unique attributes was that while at default clocks and voltages it was designed to meet a 300W TDP, it was designed for much more. AMD’s design called for it to be able to handle 400W, the amount of power needed to operate the card as if it were a true dual-GPU 5870. In practice this fell a bit short due to VRM temperatures, but for most games this was a workable solution.

In AMD’s case it has paid off well enough that with the 6990 they are returning with the same philosophy, differing only in implementation details.  AMD’s engineers have gone and built a card that can run its GPU at 6970-like GPU clocks (880MHz), you just have to do some overclocking to get there. And while AMD’s legal department will tell you that no overclock is guaranteed and that doing so voids any warranty, the design and the binning of GPUs virtually ensures every card can hit 6970 core clocks.

AMD refers to the 6990 as a 450W card. At default clocks it has a rated TDP of 375W but the cooler itself is designed to take 450W, which is why AMD went with so many design changes such as the dual-exhaust system and the exotic thermal compound. The result is that the card can generally keep itself cool at 6970 speeds, and in fact does a better job of this than the 5970 did at 5870 speeds. The catch here is that you will need sufficient cooling to deal with the heat the card dumps in to the case, 225W+ to be precise. Thus while the 6990 is already a card with specialized cooling requirements, the 6990 when overclocked is even more so. With FurMark our numbers point to our card drawing more than 500W, so 6990 overclocking is not for the faint of heart.

With the 5970 AMD enabled overclocking by producing a quick & dirty utility to bump the card’s voltage up to 5870 voltages, which then could be used with Overdrive to achieve the desired clocks. This certainly worked but it wasn’t smooth and it wasn’t consistent - not every vendor used AMD’s utility (particularly if they had their own in-house overclocking utility), and if you did use AMD’s utility then you had to set the voltage and do overclocking on every boot. AMD is not about to include voltage controls in the Catalyst Overdrive controls, so they’ve gone for a better way.


The 5970's ATI Overvolt Tool

Do you recall the BIOS selection switch on the 6900 series cards? On those cards, it was to allow users to safely flash new BIOSes to their cards while having a fallback BIOS to work from. The 6990 takes this concept and repurposes it to fit the 6990’s unique overclocking needs. The switch is still there, but instead of identical BIOSes the switch controls which performance BIOS is used. Position 2, the default position, is a write-protected BIOS that runs the 6990 at its default core clock of 830MHz and default core voltage of 1.12v. Position 1 is a write-enabled BIOS that runs the 6990 at the same core speeds and voltages as the 6970: 880MHz core clock and 1.175v core voltage; meanwhile memory clocks remain unchanged at sub-6970 speeds of 5GHz. AMD calls it the AUSUM switch (Antilles Unlocking Switch for Uber Mode); ignore the name, focus on the fact that the switch is what controls the core voltage on the 6990.


6950/6970 BIOS Switch

From a usability standpoint, the benefit of using the BIOS switch for this is that it’s much more consistent across vendors and it doesn’t require any software interaction. Just flip the switch and you’re done. However we would still count on seeing some vendors taking things a step further and offering fine-tuned voltage control for the card.

Along with the increase in the core clock and the voltage, AMD’s documentation also lists the PowerTune limit as being increased for uber mode. AMD tells us that the limit here is 450W (540W with +20% PT), however in our testing we were unable to hit that limit. Every test up to and including FurMark ran unthrottled, and we peg power consumption there at over 500W. If indeed there isn’t a PowerTune limit this is good news for extreme overclockers, but it means if you use uber mode PowerTune won’t be there to save your bacon if you push too hard.

Radeon HD 6990 BIOS Switch
Position Core Clock/Voltage PowerTune Limit Write-Protected
1 880Mhz/1.175v None No
2 (Default) 830MHz/1.12v 375W Yes

As far as additional overclocking is concerned we did not push our sample beyond uber clockspeeds. In uber mode we were already hitting GPU temperatures of 94C in Furmark, which is as high as we’re willing to go. Better cooling of course would allow easier overclocking, and with a an overdrive limit of 1.2GHz in uber mode, the card should vanish in a puff of smoke well before Overdrive becomes a limit.


Radeon HD 6990 Overdrive Limits

Of course all of this talk of overclocking cannot be held without saying something about power consumption. With 2 8pin PCIe power sockets the 6990 is already drawing the full 150W per 8pin line the PCIe specification calls for; uber mode exceeds this, potentially by quite a bit. AMD has engineered the 6990 to pull most excess power from the PCIe power sockets and not the slot itself (since the slot is the weakest link), so a notably overbuilt power supply would be necessary. AMD hasn’t provided any official guidance here, but a well-built power supply offering 20A (240W) per 8pin line with an independent rail for each line would seem to be the minimum to get away with uber mode.

Ultimately however, as we’ll see the 6990OC doesn’t have nearly as large a performance bump to it as the 5970OC did. Thanks to the much higher default clocks, the 6990OC’s core clock is only 6% faster and the memory clock is the same, versus 17% faster on the core clock and 20% faster on the memory clock for the 5970. As a result you get much better performance out of the box, but unlike the 5970 flipping the magic switch doesn’t significantly increase the card’s performance this time around. So unlike the 5970 if you want to significantly improve performance over stock, you’ll have to do some equally significant custom overclocking on the 6990.

Finally, in a close examination of a minor detail, unlike on the 6950/6970 it’s clear that AMD doesn’t intend for this switch to be easily accessible. The switch on the 6990 is slightly recessed, not by enough to make it hard to hit but enough that you’ll never accidentally hit it. Flipping the switch would need to be a conscientious action, which makes sense given the fact that doing so would void the card’s warranty.

Update: After publication of this article there's been some slight confusion on the matter of the AWSUM switch and the warranty. AMD's official guidance is that overclocking the card voids the warranty, which means that AWSUM/uber mode is warranty breaking. Technically speaking just flipping the switch doesn't break the warranty - it's operating the card that does - but retail cards will come with a sticker over the switch warning users of the potential danger of overclocking and that it violates the warranty. So breaking the sticker to flip the switch will for all practical purposes violate the warranty. Specific policies may differ by partner, however.

Meet The 6990, Cont PCI-Express Compliance: Does It Even Matter?
Comments Locked

130 Comments

View All Comments

  • Spazweasel - Tuesday, March 8, 2011 - link

    I've always viewed single-card dual-GPU cards as more of a packaging stunt than a product.

    They invariably are clocked a little lower than the single-GPU cards they re based upon, and short of a liquid cooling system are extremely noisy (unavoidable when you have twice as much heat that has to be dissipated by the same sized cooler as the single-GPU card). They also tend to not be a bargain price-wise; compare a dual-GPU card versus two of the single-GPU cards with the same GPU.

    Personally, I would much rather have discrete GPUs and be able to cool them without the noise. I'll spend a little more for a full-sized case and a motherboard with the necessary layout (two slots between PCI-16x slots) rather than deal with the compromises of the extra-dense packaging. If someone else needs quad SLI or quad Crossfire, well, fine... to each their own. But if dual GPUs is the goal, I truly don't see any advantage of a dual-GPU card over dual single-GPU cards, and plenty of disadvantages.

    Like I said... more of a stunt than a product. Cool that it exists, but less useful than advertised except for extremely narrow niches.
  • mino - Tuesday, March 8, 2011 - link

    Even -2- years since the release of the original Crysis, “but can it run Crysis?” is still an important question, and for -3.5- years the answer was “no.”

    Umm, you sure bout both those time values?
    :)

    Nice review, BTW.
  • MrSpadge - Tuesday, March 8, 2011 - link

    "With a 375W TDP the 6990 should consume less power than 2x200W 6950CF, but in practice the 6950CF setup consumes 21W less. Part of this comes down to the greater CPU load the 6990 can create by allowing for higher framerates, but this doesn’t completely explain the disparity."

    If it hasn't been mentioned before: guys, this is simple. The TDP for the HD6950 is just for the PowerTune limit. The "power draw under gaming" is specified at ~150 W, which is just what you'll find during gaming gaming tests.

    Furthermore Cayman is run at lower voltage (1.10 V) and clocks and with less units on HD6950, so it's only natural for 2 of these to consume less power than a HD6990. Summing it up one would expect 1.10^2/1.12^2 * 800/830 * 22/24 = 85,2% the power consumption of a Cayman on HD6990.

    MrS
  • mino - Tuesday, March 8, 2011 - link

    You shall not hit them so hard next time. :)

    Numbers tend to hurt one's ego badly if properly thrown.
  • geok1ng - Tuesday, March 8, 2011 - link

    The article points that the 6990 runs much closer to 6950CF than 6970CF.

    I assume that the author is talking about 2GB 6950, that can be shader unlocked, in a process much safer than flashing the card with a 6970 BIOS.

    It would be interesting to see CF numbers for unlocked 6950s.

    As it stands the 6990 is not a great product: it requires an expensive PSU, a big case full of fans, at price ponit higher than similar CF setups.

    Considering that there are ZERO enthuasiast mobos thah wont accept CF, the 6990 becomes a very hard sell.

    Even more troubling is the lack of a DL-DVI adapter in the bundle, scaring way 30" owners, precisely the group of buyers most interested in this video card.

    Why should a 30" step away from a 580m or SLI 580s, if the 6990 the same expensive PSU, the same BIG case full of fans and a DL-DVI adapter costs more than teh price gap to a SLI mobo?
  • Thanny - Tuesday, March 8, 2011 - link

    This card looks very much like the XFX 4GB 5970 card. The GPU position and cooling setup is identical.

    I'd be very interested to see a performance comparison with that card, which operates at 5870 clock speeds and has the same amount of graphics memory (which is not "frame buffer", for those who keep misusing that term).
  • JumpingJack - Wednesday, March 9, 2011 - link

    I (which is not "frame buffer", for those who keep misusing that term).


    :) Yep, I wished they would actually make it right.

    The frame buffer is the amount of memory to store the pixel and color depth info for a renderable frame of data, whereas graphics memory (or VRAM) is the total memory available for the card which consequently holds the frame buffer, command buffer, textures, etc etc. The frame buffer is just a small portion of the VRAM set aside and is the output target for the GPU. The frame buffer size is the same for every modern video card on the planet at fixed (same) resolution. I.e. a 1900x1200 res with 32 bit color depth has a frame buffer of ~9.2 MB (1900x1200x32 / 8), if double or tripled buffered, multiply by 2 or 3.

    Most every techno site misapplies the term "frame buffer", Anandtech, PCPer (big abuser), Techreport ... most everyone.
  • Hrel - Wednesday, March 9, 2011 - link

    Anyone wanting to play at resolutions above 1080p should just buy two GTX560's for 500 bucks. Why waste the extra 200? There's no such thing as future proofing at these levels.
  • wellortech - Wednesday, March 9, 2011 - link

    If the 560s are as noisy as the 570, I think I would rather try a pair of 6950s.
  • HangFire - Wednesday, March 9, 2011 - link

    And you can't even bring yourself to mention Linux (non) support?

    You do realize there are high end Linux workstation users, with CAD, custom software, and OpenCL development projects that need this information?

Log in

Don't have an account? Sign up now