AMD's Radeon HD 6990: The New Single Card King
by Ryan Smith on March 8, 2011 12:01 AM EST- Posted in
- AMD
- Radeon HD 6990
- GPUs
The launch drivers for the 6990 will be a preview version of Catalyst 11.4, which have been made available today and the final version launching sometime in April. Compared to the earlier drivers we’ve been using performance in most of our games is up by at least a few percent, particularly in CrossFire. For launching a dual-GPU card like the 6990, the timing couldn’t be better.
Along with these performance improvements AMD is also throwing a few new features in to the Catalyst Control Center, making it the first time they’ve touched it since the introduction of the new design in January. Chief among these features – and also timed to launch with the 6990 today - is 5x1 portrait Eyefinity mode. Previously AMD has supported 3x1 and 3x2, but never anything wider than 3 monitors (even on the Eyefinity 6 series).
The 6990 is of course perfectly suited for the task as it's able to drive 4 + 1 monitors without any miniDP MST hubs, and indeed the rendering capabilities of this card are wasted a good deal of the time only driving one monitor. Other cards will also support 5x1P, but only E6 cards can work without a MST hub at the moment. Notably, in spite of requiring one fewer monitor than 3x2 Eyefinity this is easily the most expensive option for Eyefinty yet, as portrait modes require monitors with wide vertical viewing angles to avoid color washout – you’d be hard pressed to build a suitable setup with cheap TN monitors like you can the landscape modes.
The other big change for power users is that AMD is adding a software update feature to the Catalyst Control Center, which will allow users to check for driver updates from within the CCC. It will also have an automatic update feature, which will check for driver updates every 2 weeks. At this point there seems to be some confusion over at AMD over whether this will be enabled by default or not – our drivers have it enabled by default, while we were initially told it would be disabled. From AMD’s perspective having the auto update feature enabled improves the user experience by helping to get users on newer drivers that resolve bugs in similarly new games, but at the same time I could easily see this backfiring with users by being one more piece of software nagging for an update every month.
Finally, AMD is undergoing a rebranding (again), this time for the Catalyst Control Center. If you use an AMD CPU + AMD consumer GPU, the Catalyst Control Center is now the AMD VISION Engine Control Center. If you use an Intel CPU + AMD consumer GPU it’s still the Catalyst Control Center. If you use a professional GPU (regardless of CPU), it’s the Catalyst Pro Control Center.
The Test
Due to the timing of this launch we haven’t had an opportunity to do in-depth testing of Eyefinity configurations. We will be updating this article with Eyefinity performance data in the next day. In the meantime we have our usual collection of single monitor tests.
| CPU: | Intel Core i7-920 @ 3.33GHz |
| Motherboard: | Asus Rampage II Extreme |
| Chipset Drivers: | Intel 9.1.1.1015 (Intel) |
| Hard Disk: | OCZ Summit (120GB) |
| Memory: | Patriot Viper DDR3-1333 3 x 2GB (7-7-7-20) |
| Video Cards: |
AMD Radeon HD 6990 AMD Radeon HD 6970 AMD Radeon HD 6950 2GB AMD Radeon HD 6870 AMD Radeon HD 6850 AMD Radeon HD 5970 AMD Radeon HD 5870 AMD Radeon HD 5850 AMD Radeon HD 5770 AMD Radeon HD 4870X2 AMD Radeon HD 4870 NVIDIA GeForce GTX 580 NVIDIA GeForce GTX 570 NVIDIA GeForce GTX 560 Ti NVIDIA GeForce GTX 480 NVIDIA GeForce GTX 470 NVIDIA GeForce GTX 460 1GB NVIDIA GeForce GTX 460 768MB NVIDIA GeForce GTS 450 NVIDIA GeForce GTX 295 NVIDIA GeForce GTX 285 NVIDIA GeForce GTX 260 Core 216 |
| Video Drivers: |
NVIDIA ForceWare 262.99 NVIDIA ForceWare 266.56 Beta NVIDIA ForceWare 266.58 AMD Catalyst 10.10e AMD Catalyst 11.1a Hotfix AMD Catalyst 11.4 Preview |
| OS: | Windows 7 Ultimate 64-bit |
Facebook
Twitter
RSS
130 Comments
View All Comments
iamezza - Tuesday, March 8, 2011 - link
This could make for an extremely valuable article for gamers on a budget. When does lack of PCIe bandwidth become an issue for running SLI/crossfire?Testing 580SLI at 2 x 8 and 2 x 16 modes would be a good place to start....
therealnickdanger - Tuesday, March 8, 2011 - link
It will be curious to see what impact the bandwidth will have... then again, even with the restriction, the current Sandy Bridge systems still dominate the previous chips.In reality, 16/16 or 8/8 really doesn't have much impact. The difference even at 2560x1600 with all the fixins in even the most demanding games is <1%. Unless AT's new test system will feature six displays and 4K+ resolutions, I'm not sure SNB-E is worth waiting so long for (yes, that could be perceived as a challenge!)
In any case, I'm looking forward to it! Thanks for the article!
shaggart5446 - Tuesday, March 8, 2011 - link
i hope u said the same thing when ur friend nvidia release their 590 card i also do hope u say the exact words that the 590 dont make any sence since a pair of 560 or 570 can give u the same performance as the 590 i cant wait to see ur article on the 590 ill be waiting for anand tfor this because we all know that the 590 are going to be down clockClownPuncher - Tuesday, March 8, 2011 - link
With cards designed specifically with multi monitor gaming in mind, you may want to include those resolutions. Buying this card for 1920x1200 would make zero sense.7Enigma - Wednesday, March 9, 2011 - link
I think it was good to have both. The number of people buying this card will likely have 30" displays, but I'm sure some (competetive FPS for example) will want extremely fluid display even in busy scenes, as well as the person that doesn't yet have the cash to upgrade to a big screen but plans to in the near future.I would also argue that there are likely vastly more people playing on large single-screen displays than eyefinity folks so this does make more sense. And honestly when some of the games are averaging in the sub 80-100 fps range, those minimum framerates approach questionable playability depending on type of game.
So basically as crazy as it is to say this, the graphical power isn't quite there yet to use Eyefinity at high detail settings in more recent and demanding games.
Nentor - Tuesday, March 8, 2011 - link
"With but a trio of exceptions, the 6990 doesn’t make sense compared to a pair of cards in Crossfire."This product is not meant to make any sense from a financial, performance or even practical standpoint.
It IS the fastest videocard and that is that.
I was watching a video last night on youtube of a chainsaw powered by a Buick's V8 engine (hG5sTLY0-V8). It goes through a tree trunk in a blink of an eye, but it had to be lifted by TWO men.
Sure is cool though.
Squuiid - Sunday, March 13, 2011 - link
It makes complete sense if you want SLI in a small form factor, mATX and such. (as do I).PCIe slots are at a premium, and so is space on a mATX board/case.
However, I think I'm going to wait and see what the 590 looks like...
Fhistleb - Tuesday, March 8, 2011 - link
I didn't even think that was possible. Though with what this is pushing out its a little expected I suppose.stangflyer - Tuesday, March 8, 2011 - link
I would like to see the 6990 and 5970 comparison in crysis and metro at eyefinity and single monitor res but with the 5970 at default clocks and close to 5870 clocks. When I am playing these games I have my 5970 at 850 core and 1150 memory and it runs all day without any throttling.The 5970 is handicapped at the default speeds as everyone can run at or real close to 5870 speeds. The core is easy at 850 but you may need to back down memory to 1150 or 1175.
Would love to see the true difference in the 5970 and 6990 this way.
The framebuffer will be the big difference at eyefinity res. with any aa applied.
stangflyer - Tuesday, March 8, 2011 - link
One thing I do like about the dual gpu amd cards is that I play a few games that use physx.. (I have a 5970) I have a 250gts in the second pcie slot. both my slots are 2x16. This way I have a powerfull gpu and physx! I play my games at 5040x1050 and a single card just don't cut it. I did use nvidia surround for 2 months but like my eyefinity setup better. To go crossfire and then have physx you need a motherboard that doesn't knock your pcie slot down to 8x with 3 cards which are few and expensive and also a case that has space for that 3rd card like a coolermaster haf 932X. I have a haf 932 (not X) and I could not go 3 cards unless the 3rd card is single slot.On a side note as to why I am sticking with my 5970 till the 28nm show up is that I like the way the cooler is set up. With the fan on the end I have my 250gts below it with about a 3/8 inch below it. BUT the 250gts is only about 7.5-8 inches long and does not cover the fan at all because the fan is at the end. I have a 120mm fan at the bottom of my haf 932 case that blows straight up into the 5970 fan.
If I used a 6990 the 250gts would cover the 6990 fan.
My choices would be then to sell the 250gts and get a single slot card. (450gts probably)
I think I am just going to stay with what I have for now.
Maybe! LOL!