The Test

For the launch of the Radeon HD 6900 series, AMD supplied us with a 6900-enabled version of the Catalyst 10.11 driver, version 8.79.6.2RC2. This is older than the Catalyst 10.12 preview released Monday, which was 8.8xx.

Otherwise our test setup has not significantly changed from the GTX 570 launch last week. For our existing AMD cards we’re still using the Catalyst 10.10e, while for NVIDIA it’s a mix of 262.99 and 263.09. Note that we do not have a 2nd GTX 570 yet for GTX 570 SLI comparisons; given the equality between the 570 and 480, the GTX 480 in SLI is a reasonable stand-in.

Finally, all tests were done with the default driver settings unless otherwise noted.

CPU: Intel Core i7-920 @ 3.33GHz
Motherboard: Asus Rampage II Extreme
Chipset Drivers: Intel 9.1.1.1015 (Intel)
Hard Disk: OCZ Summit (120GB)
Memory: Patriot Viper DDR3-1333 3 x 2GB (7-7-7-20)
Video Cards: AMD Radeon HD 6970
AMD Radeon HD 6950
AMD Radeon HD 6870
AMD Radeon HD 6850
AMD Radeon HD 5970
AMD Radeon HD 5870
AMD Radeon HD 5850
AMD Radeon HD 5770
AMD Radeon HD 4870
NVIDIA GeForce GTX 580
NVIDIA GeForce GTX 570
NVIDIA GeForce GTX 480
NVIDIA GeForce GTX 470
NVIDIA GeForce GTX 460 1GB
NVIDIA GeForce GTX 460 768MB
NVIDIA GeForce GTS 450
NVIDIA GeForce GTX 285
NVIDIA GeForce GTX 260 Core 216
Video Drivers: NVIDIA ForceWare 262.99
NVIDIA ForceWare 263.09
AMD Catalyst 10.10e
AMD Catalyst 8.79.6.2RC2
OS: Windows 7 Ultimate 64-bit
Meet the 6970 & 6950 Crysis: Warhead
Comments Locked

168 Comments

View All Comments

  • cyrusfox - Wednesday, December 15, 2010 - link

    You should totally be able to do a 4X1 display, 2 DP and 2 DVI, as long as one of those DP dells also has a DVI input. That would get rid of the need for your usb-vga adapter.
  • gimmeagdlaugh - Wednesday, December 15, 2010 - link

    Not sure why AMD 6970 has green bar,
    while NV 580 has red bar...?
  • medi01 - Wednesday, December 15, 2010 - link

    Also wondering. Did nVidia marketing guys called again?
  • Ryan Smith - Wednesday, December 15, 2010 - link

    I normally use green for new products. That's all there is to it.
  • JimmiG - Wednesday, December 15, 2010 - link

    Still don't like the idea of Powertune. Games with a high power load are the ones that fully utilize many parts of the GPU at the same time, while less power hungry games only utilize parts of it. So technically, the specifications are *wrong* as printed in the table on page one.

    The 6970 does *not* have 1536 stream processors at 880 MHz. Sure, it may have 1536 stream processors, and it may run at up to 880 MHz.. But not at the same time!

    So if you fully utilize all 1536 processors, maybe it's a 700 MHz GPU.. or to put it another way, if you want the GPU to run at 880 MHz, you may only utilize, say 1200 stream processors.
  • cyrusfox - Wednesday, December 15, 2010 - link

    I think Anand did a pretty good job of explaining at how it reasonably power throttles the card. Also as 3rd party board vendors will probably make work-arounds for people who abhor getting anything but the best performance(even at the cost of efficiency). I really don't think this is much of an issue, but a good development that is probably being driven by Fusion for Ontario, Zacate, and llano. Also only Metro 2033 triggered any reduction(850Mhz from 880Mhz). So your statement of a crippled GPU only holds for Furmark, nothing got handicapped to 700Mhz. Games are trying to efficiently use all the GPU has to offer, so I don't believe we will see many games at all trigger the use of powertune throttling.
  • JimmiG - Wednesday, December 15, 2010 - link

    Perhaps, but there's no telling what kind of load future DX11 games, combined with faster CPUs will put on the GPU. Programs like Furmark don't do anything unusual, they don't increase GPU clocks or voltages or anything like that - they just tell the GPU - "Draw this on the screen as fast as you can".

    It's the same dilemma overclockers face - Do I keep this higher overclock that causes the system to crash with stress tests but works fine with games and benchmarks? Or do I back down a few steps to guarantee 100% stability. IMO, no overclock is valid unless the system can last through the most rigorous stress tests without crashes, errors or thermal protection kicking in.

    Also, having a card that throttles with games available today tells me that it's running way to close to the thermal limit. Overclocking in this case would have to be defined as simply disabling the protection to make the GPU always work at the advertised speed.
    It's a lazy solution, what they should have done is go back to the drawing board until the GPU hits the desired performance target while staying within the thermal envelope. Prescott showed that you can't just keep adding stuff without any considerations for thermals or power usage.
  • AnnihilatorX - Wednesday, December 15, 2010 - link

    Didn't you see you can increase the throttle threshold by 20% in Catalyst Control Centre. This means 300W until it throttles, which in a sense disables the PowerTune.
  • Mr Perfect - Thursday, December 16, 2010 - link

    On page eight Ryan mentions that Metro 2033 DID get throttled to 700MHz. The 850MHz number was reached by averaging the amount of time Metro was at 880MHz with the time it ran at 700MHz.

    Which is a prime example of why I hate averages in reviews. If you have a significantly better "best case", you can get away with a particularly bad "worst case" and end up smelling like roses.
  • fausto412 - Wednesday, December 15, 2010 - link

    CPU's have been doing this for a while...and you are allowed to turn the feature off. AMD is giving you a range to go over.

    It will cut down on RMA's, Extend Reliability.

Log in

Don't have an account? Sign up now