We received our first Core i7 920 D0 stepping from ASRock a few days ago and have been testing it thoroughly on their X58 SuperComputer Motherboard outfitted with four GTX 260-216 video cards. This new stepping certainly shows promise as initial clocking, voltage levels, and memory speeds were improved for the most part over our best C0 stepping. However, the differences were not exciting enough for us to immediately whip out the credit card and go hunt down a D0 stepping processor. In the middle of our testing, ASRock provided an updated BIOS tuned with the D0 stepping in mind and the results changed enough for us to seek a retail processor. Our ES sample was good, not as good as some hand picked samples we noticed at various forums back in March, but we wanted a retail processor.

We called up our good friends at TankGuys and they were able to hook us up (after our credit card cleared) with two D0 stepping 920 processors. Ben was able to overnight the first unit in time for us to test over the weekend and our initial results have just been terrific to date. Unfortunately, our ASRock X58 board (yes, this board makes for a very good multi-GPU platform) was tied up in testing for an upcoming Workstation review. So looking around the lab, we grabbed our trusty DFI LanParty UT X58-T3eH8 and updated it with the latest magical mystical BIOS from Oskar, Jarry, & Company. This particular BIOS is very D0 stepping friendly along with incorporating a few changeable settings like Round Trip Latency (RTL) that allows us to clock our Corsair Dominator GT memory kit a little higher than the other X58 motherboards.

The first test results just blew us away and we wanted to share one particular result today. We are still testing and will have a full article up in the near future featuring a variety of motherboards and cooling choices, but at this moment, the D0 920 stepping provides real and tangible benefits for the overclocking community over the previous C0 steppings. There is no difference in application benchmarks between the two processors at stock or like overclocked settings, nothing drastic has changed like cache levels or the IMC design. Rather this is a "standard continuous process improvement" update as Intel officially informed us. These improvements have enabled us to achieve higher overclocks at like or lower voltages, higher memory speeds at like or lower voltages, and as a result, our CPU, PWM, and case temperatures are down while overclocked numbers are up. Until we finish up our testing, the screenshot below is one example (not even our best) of our test results with the Core i7 920 D0 (3845B027 lot code) processor.

We enabled Turbo mode on all four cores for a final 21x CPU multiplier, set Bclk to 205, memory ratio to 2:10, Core VID at 1.345V, VTT to 1.37V, IOH to 1.19V, and VDimm at 1.69V. This resulted in a final CPU speed of 4.309 GHz, memory speed at 2052 with 7-8-7-20 1T timings, and it is 24/7 stable. We actually could reduce Core VID to 1.30V, VTT to 1.34V, and VDimm to 1.67V and pass our OCCT/Prime 95 tests. However, at the reduced voltage rates our video encoding tests with RipBot264 or HandBrake would fail along with our trusted Crysis WarHead and PCMark Vantage x64 loop testing. We think we can reduce the voltages slightly from their current settings and still pass our benchmark test suite, but for now we feel safe with our results.

The question that has not been answered yet is how our C0 processors steppings faired. First off, none of the C0 steppings we have would operate at these particular voltage settings, in fact two of them failed to POST. Our best C0 sample is requiring 1.425V on Core Vid, 1.250V IOH, 1.475V VTT, and 1.71V VDimm to just make it into Vista Ultimate 64 and we still have not dialed in application stability yet. Once we complete the C0 testing, expect to hear back from us on this new/old processor.

We just passed the eight hour test mark (multi-tasking tests, OCCT, PCMark Vantage x64 loops) with the above setup. Once again, we set our CPU multiplier to 21x for all cores, Bclk at 210, 2:10 memory ratio, and voltages set to 1.376V on Core Vid, 1.37V VTT, 1.26V IOH, along with 1.69V on VDimm. This results in a 4.41GHz clock speed and DDR3-2100 memory speed at 7-8-7-20 1T timings.

We will be back shortly with results on the ASRock X58 SuperComputer board with a new performance level BIOS as our workstation testing with it is now complete.



View All Comments

  • Beno - Saturday, April 11, 2009 - link

    no way you're getting those temps with freezone elite.
    or the lan party show low temps.

    a friend had a freezone elite and barely keeping up with the heat.
  • Beno - Saturday, April 11, 2009 - link

    edit: those are idle temps right? :banghead: Reply
  • orionmgomg - Thursday, April 09, 2009 - link

    I have been playing with the vcore - and I have always needed it to be above 1.35 to post with any OC with CO steping- It shows 1.368 Vcoe in CPUz for a stable 3.6Ghz OC, (I forgot the exact BIOS Voltage I settled on...) I am not able to POST with lower Vcore - but your hitting 4+ on air with 1.31 Vcore? Please advise.

    Also, IOH Voltage? New to the X58 any insite on voltages "peramitors" for the new voltage options with the X58s.

  • SirKronan - Thursday, April 09, 2009 - link

    Thank you! You i7 OC'ers continue to give me hope. My C0 processor sits in its box, motherboard on the shelf as I drool, waiting for my RAM to arrive ... Oh that I had Amazon prime BEFORE I placed the order!

    Appreciate this a lot guys.
  • DrNip - Wednesday, April 08, 2009 - link

    msgclb will you please roll back your BIOS to the original to see if it will post with the D0 and the DFI LP UT X58-T3eH8. I have this setup and don't have a C0 to update my BIOS and can't seem to get my mobo to post. Many think it is because of the BIOS needing updated. Thanks. Reply
  • msgclb - Wednesday, April 08, 2009 - link

    I finally got a Core i7 920 D0 from TankGuys that I've installed in my DFI LanParty UT X58-T3eH8. What I now need is that 03/18/2009 BIOS that you say is the 'latest magical mystical BIOS from Oskar, Jarry, & Company'. Reply
  • sleepeeg3 - Wednesday, April 08, 2009 - link

    D0 is a cosmetic change. Nothing more.
  • thebeastie - Tuesday, April 07, 2009 - link

    I want it faster!

  • thelastknight - Tuesday, April 07, 2009 - link

    So can you answer the question on what specifically you were using to cool this new proc? 4.3G's is definately a new high for air if so.
  • sparkuss - Tuesday, April 07, 2009 - link

    This article now says (UPDATED). There isn't any bolding or such, so anyone notice what is new? Reply

Log in

Don't have an account? Sign up now