PAR2 Multithreaded Archive Recovery Performance

Par2 is an application used for reconstructing downloaded archives. It can generate parity data from a given archive and later use it to recover the archive

Chuchusoft took the source code of par2cmdline 0.4 and parallelized it using Intel’s Threading Building Blocks 2.1. The result is a version of par2cmdline that can spawn multiple threads to repair par2 archives. For this test we took a 708MB archive, corrupted nearly 60MB of it, and used the multithreaded par2cmdline to recover it. The scores reported are the repair and recover time in seconds.

Data Recovery - par2cmdline 0.4 Multithreaded

Microsoft Excel 2007

Excel can be a very powerful mathematical tool. In this benchmark we're running a Monte Carlo simulation on a very large spreadsheet of stock pricing data.

Microsoft Excel 2007 SP1 - Monte Carlo Simulation

The same is true for our Excel Monte Carlo simulation - where there's an Intel optimization, the performance is predictable.

Sony Vegas Pro 8: Blu-ray Disc Creation

Although technically a test simulating the creation of a Blu-ray disc, the majority of the time in our Sony Vegas Pro benchmark is spend encoding the 25Mbps MPEG-2 video stream and not actually creating the Blu-ray disc itself.

Sony Vegas Pro 8 - Blu-ray Disc Image Creation (25Mbps MPEG-2)

More of the same here - the 965 BE is faster than any LGA-775 Intel CPU here, but compared to i7 it's noticeably slower.

Sorenson Squeeze: FLV Creation

Another video related benchmark, we're using Sorenson Squeeze to convert regular videos into Flash videos for use on websites.

Sorenson Squeeze Pro 5 - Flash Video Creation

I'm running out of ways to say that the standings remain unchanged.

WinRAR - Archive Creation

Our WinRAR test simply takes 300MB of files and compresses them into a single RAR archive using the application's default settings. We're not doing anything exotic here, just looking at the impact of CPU performance on creating an archive:

WinRAR 3.8 Compression - 300MB Archive

The standings remain unchanged.

3D Rendering Performance Gaming Performance
Comments Locked

54 Comments

View All Comments

  • brybir - Thursday, August 13, 2009 - link

    I did notice on newegg that AMD is releasing some of its Phenom II's with lower TDP.

    They have a Phenom II 945 that was rated at 125WTDP now with the same processor just rated at 95W TDP.

    I figure they will goose the clock speed a bit more if they can and continue to work on getting their power consumption lowered on the rest of their line so by the time their new processors come out the Phenom II's can pull up low power budget duty.
  • Taft12 - Thursday, August 13, 2009 - link

    I was going to mention this new part from AMD as well (945 95W edition). Anand you would do well to draw attention to it as well where you talk about AMD's current product lineup. This is a more interesting and notable introduction to me than this 140W behemoth.

    I was surprised to see the 965 only consumes 3W more at load than the 955BE however. Yes it draws the highest power on the chart, but only just barely.
  • werfu - Thursday, August 13, 2009 - link

    What AMD needs is a way to improve performance per clock, that's it, either K11 or something new. There's no way they'll be able to scale much past the 4Ghz point. Imagine the boost they would get, if they could provide 10% more clock efficiency, at the clock they are currently that would be a huge boost. They also need to improve the IMC. Going for 4 memory stick with AMD for now is a no go if you want to have high ram speed. Memory bandwidth is definitely a huge Intel advantage. And something like Hyperthread could be nice too.
  • TheHolyLancer - Thursday, August 13, 2009 - link

    uncore? isnt this HTT?

  • JumpingJack - Sunday, September 21, 2014 - link

    No, uncore is not HTT....
  • medi01 - Thursday, August 13, 2009 - link

    "The problem with the $245 price point that AMD’s flagship sells at is one of positioning. It is dangerously close to the $284 price of a Core i7 920, which is generally a faster chip."

    Sorry, but shouldn't you also include motherboard price into calculation?
  • C'DaleRider - Thursday, August 13, 2009 - link

    Well, really depends upon where you buy your parts from, doesn't it?

    Given that I have a MicroCenter and Fry's handy, the price for Intel's Core i7 cpu is $200. Combine that with an inexpensive X58 motherboard, like the MSI X58M, that has gotten quite good reviews for what it is, retails for $170.

    That gives a $370 price for mb and cpu to move to i7....cost of DDR3 memory is a wash due to both platforms requiring it.

    Of course, for those that depend upon Newegg's pricing for cpus, I feel for you....getting ripped off and all. Horrible how the 'Egg gouges on cpu prices these days.
  • mohindar - Thursday, August 13, 2009 - link

    How you can fit this processor onto socket LGA775, as mentioned in the final page...
  • mohindar - Thursday, August 13, 2009 - link

    Sorry, wrong comment.
  • Ben90 - Thursday, August 13, 2009 - link

    the SYS Mark 2007 Chart has the i7 920 @ 2.8 ghz... dont know if its on purpose or a typo

Log in

Don't have an account? Sign up now