AMD Black Edition Memory Profiles: One Click Memory Overclocking

There’s another little overclocking improvement that AMD implemented in software: Black Edition Memory Profiles (BEMP).


My Corsair memory can run at DDR3-1600 9-9-9-24, AMD's database knows this

If you have a motherboard with an AOD3 compatible BIOS (yes, there is such a thing) and you have a DDR3 memory module that has an AMD Black Edition Memory Profile, you can click one button and your system will overclock its memory to the settings that AMD and the memory vendor guarantee their platform at.

The memory/participating vendors list is as follows:

Manufacturer Memory Module(s)
Corsair CM3X2G1600C9DHX
Kingston KHX11000D3LLK2/2G
KHX12800D3K2/2G
Mushkin 991629
OCZ OCZ3AMD18002G

 

Yep, it’s not very long. But the effect is pretty neat. The AOD3 utility connects to AMD’s online database and finds your memory. It retrieves what settings AMD and the memory vendor agree will work and then applies them to your system. A simple reboot later and you have an overclocked un-core and DDR3 memory. The table below shows you what will happen:

Rated DDR3 Speed 1333MHz 1600MHz
NB Frequency 2200MHz 2400MHz
NB Voltage 1.200V 1.300V

 

The memory timings and voltages are also properly set. Unfortunately with my Gigabyte 790FX board there’s a bug where instead of setting the BEMP compliant Corsair memory to 1.75V it sets it to 1.70V which isn’t stable. AMD is clearly still working out bugs in the system, but thankfully it’s software so those bugs can be worked out.


These Corsair modules support BEMP

Additionally, you can always create your own profiles to avoid mishaps like this one. What sort of performance boost can a single click yield? The graph below shows you:

The average increase in performance was only 1.3%, mostly due to the fact that some numbers went down. The problem is that DDR3-1333 (my default speed) at CL7 is lower latency than DDR3-1600 at CL9; applications that can’t use the added bandwidth are penalized by the longer memory access latency. That being said, some applications did show performance boosts from 1 - 5%. Is it enough for me to specifically buy memory that has a Black Edition Memory Profile? No, but it’s a nice convenience if you happen to have some.

The Software Answer to Intel’s Turbo Mode Overclocking – Adventures in Frustration
Comments Locked

65 Comments

View All Comments

  • erple2 - Thursday, April 23, 2009 - link

    But I think that's just it. The number of apps that use more than 2 cores is at quite a dearth, particularly given the 2 years since the 4 core processors started coming out in force.

    So that's just it. How many apps does one use that takes advantage of more than 2 cores? Personally, I have 2 - a compiler and an MP3 ripper. And the MP3 ripper is only marginally speedier with 2x as many cores.

    So the point still stands from the Grandparent - Why do we need these 4 core behemoths (well, 4 cores with hyperthreading) when there are still so few applications that take advantage of those cores?
  • JimmiG - Thursday, April 23, 2009 - link

    The BIOS updates situation is pretty sad. When I bought my M3A32-MVP Deluxe (790FX) board and a cheap lower-end Phenom X4, I was hoping that the board would allow me to use future 45nm Phenom CPUs without problems. That won't happen. Even though the board is technically compatible even with the 955, Asus will never release a BIOS update for this board. Asus likes to abandon its customers once the product is more than 6 months old.

    It's not only Asus's fault, though. AMD has been changing sockets like crazy for the last few years. S939/S754, AM2, AM2+, AM3.. Meanwhile Intel only switched sockets once with the move to i7.
  • slashbinslashbash - Thursday, April 23, 2009 - link

    I agree, the BIOS situation is horrible. What is even worse is what you have to do to update a BIOS to use a newer processor. I will give an example, which I know is kind of extreme but it shows what's wrong with the situation.

    I bought an ASUS P5B a couple of years ago when CompUSA was going out of business. It was a good board for a cheap price. I didn't have any use for it at the time, as I had a good AMD S939 system running, but socked it away for future use. Couple of years later, I get a Celeron 430 + ECS mobo deal at Fry's for like $60. I put the CPU in and..... it doesn't even beep at me. I had to go and buy an ancient CPU (Pentium 630) just to get to the point where I could do the friggin' BIOS update to be able to run the newer Celeron. This, to me, is unacceptable. I'm not asking for full compatibility, just enough smarts to realize that this is a working processor plugged in, so can't we just run it at some minimum specs and pop up a "Please Update BIOS" message on the screen, and allow that BIOS update to run?

    I totally understand CPU-mobo mismatches if the newer CPU requires a lower voltage or something like that. But, if the CPU is compatible, it ought to run in some minimal state necessary to at least load a BIOS update. Ideally, it would run some microkernel with networking that could automatically FTP the latest BIOS from the manufacturer; but that's probably too much to ask.
  • spunlex - Thursday, April 23, 2009 - link

    Some motherboards do. My abit ip-35 pro ran my q9450 at 2.2Ghz, under the wrong name until I flashed the bios. So it is possible it seems to depend on the effort the board manufacturer is willing to make.
  • strikeback03 - Thursday, April 23, 2009 - link

    Just because a board uses Socket 775 doesn't necessarily mean it can use all S775 processors, my P965 board doesn't list compatibility with any 1333FSB processors.
  • Roland00 - Thursday, April 23, 2009 - link

    AMD
    Socket 939 June 2004
    AM2 May 2006
    AM2+ Nov 2007
    AM3 February 2009

    Intel
    473 Nov 00
    478 Aug 01
    775 June 2004
    1366 Nov 08

    Now intel may recently have been not releasing new sockets as quickly as AMD, but during the Pentium 4 days from 473 to 478 to 775 they were releasing new sockets as quickly as AMD did during the AM2 era. And while you had the same socket 775 for 4 years it wasn't guaranteed that the newer cpus will work on your motherboard (see nvidia chipsets which wouldn't allow you to upgrade from a Pentium 4 to a Pentium d or a 65nm part to a 45 nm part). How is that different than AM2+ processors being compatible with AM2 boards if the bios maker just released a stupid bios.
  • JarredWalton - Thursday, April 23, 2009 - link

    Let's not forget for socket 775 you had:

    Pentium 4 Northwood, Prescott - I don't *think* there was any compatibility issue here, though I'm sure some boards didn't support new Prescott chips, and of course there were new FSB speeds that required a new board/chipset

    Pentium D Smithfield - yes, another chipset/board upgrade was needed.

    Pentium D Presler - sadly, many boards didn't support this update either, since it used a 1066FSB.

    Conroe/Allendale - definitely needs new board/chipset, but mostly compatible with all new "Core" CPUs.

    Kentsfield - many boards wouldn't support quad core, so you needed to upgrade.

    Wolfdale/Yorkfield - yet again, many need an updated board.

    Or we could just list chipsets:
    865/875 - adds 800FSB
    910/915/920 - PCI-E and DDR2 support. Prescott also.
    945/955 - 1066FSB and Pentium D
    965/975 - Initial Core 2 chipsets; Core 2 Quad not supported on all boards
    P35/X38 - adds support for 1333FSB, initial DDR3 support starts
    P45 - Generally needed for Wolfdale/Yorkfield support
    X48 - adds official 1600FSB (only needed for Q9770)

    So while socket 775 has been around "forever", we have had no less than six chipset families in that time - and that's just the Intel chipsets. NVIDIA would add quite a few more to the mix. Naturally, AMD wasn't without fault - there were 939 boards that wouldn't work with dual-core chips, and later AM2 boards that don't work with Phenom. Now we have AM2+ that won't work with AM3 chips.

    All this goes back to my general attitude of never purchasing a motherboard for its "future proof" capabilities. Get a board because it has what you want/need right now, and when it's time to upgrade then reevaluate your needs.
  • swaaye - Sunday, July 5, 2009 - link

    My 'ol P965 board can technically run the latest Wolfdale CPU. You have to overclock the FSB to 1600, but that's no big deal really cuz I run a Conroe past that anyway lol. Gigabyte keeps things up to date as long as there isn't some serious hardware level incompatibility.

    Some 945 boards can run the latest stuff too as long as it's 800 FSB.

    Really, the sockets change because the CPU maker figured out that the older spec didn't do the trick for some reason. I find it curious that people think that sockets should last for many CPU generations, as if the socket has little to do in the grand scheme of things.
  • crimson117 - Thursday, April 23, 2009 - link

    Ditto... I got burned buying socket 939 x2 4400+ right when the it came out (July 2005), expecting to have a drop-in CPU upgrade in the next year or two. Boy was I pissed when it was replaced by Socket AM2 in May 2006, just 10 months later. (and also pissed that nothing much faster than the 4400+ was ever released on 939).

    Do they really get so much benefit from changing sockets that losing compatibility is worth it?
  • JarredWalton - Thursday, April 23, 2009 - link

    I think honestly that a large percentage of chipset/mobo updates are to help companies make money and not for any serious benefit. It's usually at best a 2-5% boost in performance for stuff like new memory technology, tweaked chipset, etc.

Log in

Don't have an account? Sign up now