Simulating a Used Drive

Since SSD performance degrades over time, it’s important to not only look at how well these drives perform new - but also the worst they’d perform over their lifetime. In order to do so we’d need a repeatable way of “seasoning” a drive to reduce its performance to the worst it could possibly get. The most realistic worst-case scenario is one where every single block on the drive is full of data. If a secure erase wipes all LBAs, that’s the best place to start. To simulate a well seasoned drive I first secure erased the drive.

After the secure erase, I used iometer to write one contiguous file across the disk - filling up the entire drive with 128KB blocks. In the case of the 80GB Intel X25-M, that’s 74.5GB of data on the drive before I run a single benchmark. The spare area is left untouched.

Next, I take my test image and I restore it onto the partition with a sector by sector copy. The sequential file write made sure that data is stored in every page of the SSD, the test image restore adds a twist of randomness (and realism) to the data.

There are other ways to produce a drive in its well-used state, but this ends up being the most consistent and repeatable. To confirm that my little simulation does indeed produce a realistically worn drive I ran PCMark on three different drives: 1) a freshly secure-erased Intel X25-M, 2) an Intel X25-M setup using the method I just described and 3) the Intel X25-M used in my CPU testbed that has been through hundreds of SYSMark runs.

The benchmark of choice is PCMark Vantage; it simulates the real world better than most drive benchmarks. The results are below:

Intel X25-M State PCMark Vantage Overall Test PCMark Vantage HDD Test
Fresh Secure Erase 11902 29879
Simulated Used Drive 11536 23252
Actual Testbed Used Drive 11140 23438

 

The secure erased system loses about 3% of its overall performance and 22% of its hard drive specific performance compared to my testbed drive. The seasoning method I described above produces a drive with nearly identical drops in performance.

The method appears to be sound.

Now that we have a way of simulating a used drive, let’s see how the contestants fared.

Restoring Your Drive to Peak Performance New vs Used SSD Performance
Comments Locked

250 Comments

View All Comments

Log in

Don't have an account? Sign up now