Sequential Read/Write Performance

To measure sequential read and write performance I created an iometer test script to read and write 2MB files to the drives. The writes are 100% sequential and are performed on an unpartitioned drive for 3 minutes.

Performance is reported in MB/s, higher numbers are better.

The sequential read performance of the latest generation of SSDs is nothing short of amazing. The OCZ Vertex pulls through with 250MB/s, over twice the speed of the VelociRaptor and 2.5x the speed of the Samsung SLC drive that OCZ used to sell for $1000.

Looking at write performance we see things change a bit. The OCZ Summit and Intel X25-E are the only two drives that can outperform the VelociRaptor, and they do so handsomely. The rest of the drives fall below even the 7200 RPM Caviar SE16. They are by no means slow, they just don't destroy the fastest hard drives as they do in other tests.

While the X25-E should perform the way it does, the OCZ Summit uses MLC flash yet it performs like an SLC drive. This is a very important benchmark as it shows the sort of performance Samsung has optimized for with its controller. This drive is designed to shatter bandwidth barriers, but what about latency?

The Test Random Read/Write Performance
Comments Locked

250 Comments

View All Comments

  • Natfly - Wednesday, March 18, 2009 - link

  • DangerMouse4269 - Tuesday, April 13, 2010 - link

    Nicely written. Even a very out of practice Comp Eng understood that.
  • geekforhire - Monday, June 14, 2010 - link

    I have just replaced the hard drive in this 3 year old Dell Inspiron 9400 notebook computer with a new and very quick OCZ SSD, manually configured the partition with a 1024 offset, freshly installed the OS, freshly downloaded all of the latest and greatest drivers from Dell, and applied all currently available OS updates from Msft.

    The problem is that when the machine resumes from Standby, it will /reliably/ (4 out of 4 attempts) produce a BSOD 0xF4 after the power button is pressed to resume the machine from standby.

    Here's the sequence to recreate the problem:

    0) Machine is booted normally into Windows, and log in to an account which has administrative privs.
    1) Click on Start -> Shut Down -> Standby.
    2) See display turn black, disk I/O light flashes then stops, then the power indicator light begins to flash on and off slowly.
    3) Wait until the power light has made 2 slow flashes.
    4) Press the power button.
    5) See the Dell Bios splash screen, then disappear
    6) Boom: See the BSOD 0xF4

    The values reported after the STOP are:
    (0x00000003, 0x865b3020, 0x865b3194, 0x805d2954)

    Note that I've been in contact with OCZ before about this SSD+computer, because the previous BSOD that was produced was 0x77. Their recommendation was to create the partition with an offset with a 64 interval, and to reflash the SSD with their modern firmware. This was done, the OS was reinstalled as described, and now I'm getting a different BSOD code. Another mention was a question whether the notebook computer uses a SATA2 controller (definitely compatible) or SATA1 (which may have troubles).

    I've run Spinrite on the SSD, and there are lots of ECC errors being reported. I've been in contact with Spinrite, and they chalk this up to the SSD being chatty (which they like), but since SSD's are new and magnetic disks are common, they want to stay focussed on magnetic disks.

    When the machine boots back up, the OS reports that a serious error has occurred, and asks that a problem report be submitted, which I do. Then an attractive but somewhat generic page is displayed with common causes (Aging or failing hard disks, large file transfers from secondary media to local hd, loss of power to a hard drive, hard disk intensive processes (eg: antivirus scanners), recently installed hardware that might have compatibility and performance problems)

    Has anyone else encountered this kind of problem, and do you have any suggestions?
  • angavar - Thursday, September 9, 2010 - link

    As a medical student I can appreciate a well researched and analytical article when I see it. This is by far the best computer hardware review I have ever read! Thank-you for your time and effort in producing what is clearly a thoroughly researched and detailed analysis.
  • mac021 - Wednesday, October 17, 2012 - link

    Thank you for the lesson and helping me understand SSD drives. May I just ask for your advice...

    For everyday use designing and generating prototypes for websites and running typical office s/w like word and excel for long documentations while listening to music or just having some video play in the background, then the occasional gaming of, say Star Craft 2 and Dead Space 3, and lets assume I do this on a 5 hours a day average for 365 days in a year, how long before I need to replace an OCZ Vertex/Summit SSD? And does format/reinstall help in prolonging the life of an SSD just as it does for my old hard drives (from a computer that's 6 years old and counting)? Or there's no stopping the SSD's death after reaching 10,000 times of being erased and rewritten on? I'm not one who keeps upgrading or buying new computer systems for every new thing that comes out, i'm more of a keeper and maintainer for as long as the system servers my needs... but when I make a purchase, I make sure it will be enough to last me another 6-12 years IF possible! Which is why I'm still considering SATA for my next purchase late this year or early next year (and I'm only buying a new PC just because I made a mistake buying a foxconn motherboard that can't support anything higher than XP, not even Vista... weird, anyway I found that out too late).

    Also, would you know of a motherboard that supports SSD, Windows 8, Nvidea, third gen i5/i7, and up to 64GB ram?

    Thanks so much!
  • windows10 - Wednesday, November 30, 2016 - link

    This article is meaningfull, interesting. thank you for sharing
  • susanbones - Tuesday, September 12, 2017 - link

    I was wondered to these many responses here.

Log in

Don't have an account? Sign up now