Cooler Master Silent Pro 500W - Overview


We already reviewed the Cooler Master Silent Pro 500W, but we felt it would be a good inclusion for this roundup. This is the third Enhance manufactured power supply, and it looks very similar to the BFG unit since it also uses a 140mm fan. The difference between the units is that Cooler Master provides a cable management system, so you can remove any extra peripheral or PCI-E cable harnesses. Cooler Master also places rubber frame around the front and rear of the PSU to isolate the power supply from the chassis and dampen noise. Of course, this is only slightly effective since you still have to use screws to secure the power supply to the chassis.


The Cooler Master Silent Pro look slightly different than the other Enhance units in this roundup. For one, the heatsinks are larger and there are thin copper plates between the components and the heatsinks (the color of the material actually looks more like brass and copper, but that's beside the point). There are also more components on the PCB, including two Mequon Chemi-Con capacitors in the primary instead of one. Once again, Su'scon and Teapo capacitors are used in the secondary.

BFG - Performance Cooler Master - Performance
Comments Locked

62 Comments

View All Comments

  • Christoph Katzer - Friday, February 20, 2009 - link

    You can find the review here
    http://www.anandtech.com/casecoolingpsus/showdoc.a...">http://www.anandtech.com/casecoolingpsus/showdoc.a...

    There are tons of others in the Cases/Cooling/PSUs section you might want to check out.
  • Nickel020 - Saturday, February 21, 2009 - link

    There are reviews there, but it would be good if you could include PSUs you already reviewed in the conclusion to say how they measure up to the currently reviewed units.
    Most people just don't know enough about PSUs to judge how good that PSU in the single review is compared to the ones in the round-up.
  • kilkennycat - Friday, February 20, 2009 - link

    No details on whether the SATA power connectors are right-angle or straight. For each power supply it would be very useful to detail the distribution of right-angle vs straight.. even to the extent of picturing or sketching the cables. In many of the mid-sized or uATX cases in which these power supplies might be used, the hard-disks may overhang the motherboard components or might bump into the rear of a video card. Remember that the SATA hard-disk power-port is much closer to the motherboard and its mounted components than the 4-pin Molex on PATA units. A right-angle SATA power connector might make all the difference between a comfortable fit and having to purchase a 4-pin Molex to right-angle SATA power adapter. I have run into this problem several times with computer cases where the hard-disks are mounted cross-wise and with little clearance between the rear of the hard-disk and the side-cover. Also my latest experience of this problem was on a recent uATX build that required 3-disk storage. The clearance space between one of the hard-disks and the motherboard memory DIMMS required a right-angle SATA power-connector. I had to satisfy that requirement with a 4-pin Molex to right-angle SATA power adapter.... If I had known in advance how many right-angle SATA power connectors came with the power-supply, I could have ordered the adapter in advance.....
  • Christoph Katzer - Friday, February 20, 2009 - link

    Quickly done, Akasa has the only angled SATA connectors and I Don't see that too often either...
  • kilkennycat - Sunday, February 22, 2009 - link

    Thanks for the reply.

    The Corsair HX520W Modular Power Supply has 2 modular SATA cables, each with one right-angle and one straight connector - a reasonable compromise.

    Btw, the fact the Corsair HX520W was entirely missed from your 500-550W roundup is rather odd, with its high quality (HardOCP Review Gold Star, Dec 2007), 2-year-production quality history (now up to over 400 customer reviews on Newegg - 5 stars, uniquely unusual for a power-supply) It also has triple 18A max 12V outputs --- unlike those less expensive to manufacture with only one 12V rail and umpteem amps on that rail. The single-12V high-wattage power-supplies totally ignore Intel's SAFETY recommendation of a maximum of 20A per 12V output. An internal quasi-short - dendrite growth, fine metallic bits, loose wire-clippings etc - involving the 12V rail and with one of these 40-50amp 12V current power-supplies can potentially turn your PC instantly into a very handy radiant heater/fire-source.
  • strikeback03 - Monday, February 23, 2009 - link

    Are you talking about this roundup? The Corsair is in there.
  • kilkennycat - Tuesday, February 24, 2009 - link

    Oops !!! MANY APOLOGIES to both you and Christopher. I was speed-reading the Introductory page and read the following :- "We have four units manufactured by Enhance, four more from Seasonic, two by Sirtec, one Enermax, and one Topower. " I did not realize that Christopher was referring there to the original power-supply OEMs and not the retail labels. It would have been nice to have a list of the actual retail model numbers of the 12 power-supplies on the intro page. As it was, I only read the first few reviews and quit before I got down as far as the Corsair..... Again, many apologies. Long day, late night reading, insufficient reading stamina....
  • Nickel020 - Friday, February 20, 2009 - link

    First off, great job on the performance review part! The graphs are great and much easier to understand than the usual screenshots from the measuring software.
    I'm a little disappointed by the acoustics part though. dB measuremeents are pretty much useless since they don't really reflect subjective sound perception. PSUs with "more" dBs will often be considered quieter, in fact, dB measurements don't reflect the ranking of PSUs that you will find on silentpcreview.com
    Measurements in Sone would be much better, but I guess the testing equipment is somewhat expensive :(
    Since you're also from Germany, wouldn't some kind of cooperation with PCGH or even c't be possible?
    Something else that I'm missing here is a Be Quiet! unit, but I think they're pretty similar to the Tagans, are they not?

    That's all :)

    Thanks again for the article!
  • Nickel020 - Saturday, February 21, 2009 - link

    One more comment:
    What happened to the fan speed/load curves?

    Those were really useful fo judging acoustics. If you know the fan that was used in there then you can judge the subjective noise at a certain RPM pretty well.
  • philosofool - Friday, February 20, 2009 - link

    I bookmarked this article because I want to have it around next time I'm shopping for computer parts. Unlike processors and similar components, where every extra dollar spent usually comes with a little more perforamnce, PSUs are an area where price and quality come apart. I want a stable, cool, QUIET PSU, and I want to pay as little as possible to have that. Every dollar I save getting a PSU that will do just what I need is another dollar I can spend on a video card. This article is going to help me build a better machine.

Log in

Don't have an account? Sign up now