Antec Earthwatts 430W


The Antec Earthwatts 430W comes in plain grey and is equipped with an 80mm fan at the back of the power supply. Even though this power supply is an older model, we felt that we should include it again in our roundup because it is still available and is generally well regarded. The label provides the typical information we find on power supplies, with the expected figures for a 430W maximum output. Two 12V rails of 17A each are enough for most users, and the combined 12V power of 360W is quite acceptable. 360W combined equates to 15A for rail when both are "fully" loaded. We would be hesitant to try to use this PSU with one of the top-end graphics cards, but if you're using a power supply with a single 6-pin PCI-E connector you should be fine.


The inside looks familiar to other Seasonic-made power supplies, since Seasonic rarely changes their basic internal design. Of course, that doesn't mean the power supplies themselves are actually the same. There are several differences, and we expect this unit will be at a slight disadvantage. Antec uses an 80mm exhaust fan located at the rear of the power supply, but the heatsink design would normally use a 120mm intake fan. We expect this unit to be slightly warmer and/or noisier than similar designs that use a single 120mm fan. Nippon Chemi-Con manufactures the primary capacitor.

Other than the main 24-pin ATX power cable, the cable harnesses are sleeveless. Antec has taken a very simple approach in terms of appearance, and the only concession to keeping the cables tidy is the use of cable ties spaced over the length of the cables. The length of the harnesses is average, with the last Molex connector just 80cm from the power supply. The main connectors are all on 50cm cables. The quantity of connectors could have been better, but a normal midrange PC shouldn't require more than what Antec provides. There is only one 6-pin PEG connector, which makes sense considering the overall wattage and target market.

Index Antec Earthwatts 430W - Performance
Comments Locked

39 Comments

View All Comments

  • 7Enigma - Wednesday, December 31, 2008 - link

    That is a heck of a lot of work for this article and we appreciate it immensely! Between this article and the upcoming mid-range builders guide (I'm begging...please get it out asap) you have reaffirmed for me this is the #1 site.

    Thanks again.
  • TheDoc9 - Wednesday, December 31, 2008 - link

    The breakdown of the cable connectors and the build quality descriptions were helpful. The power noise charts look useful as well.
  • mino - Monday, January 12, 2009 - link

    Copy that, one of the best PSU roundups around.
  • magreen - Wednesday, December 31, 2008 - link

    We definitely appreciate the roundup. It addresses our needs as consumers. I wish you'd add more info about the Antec Earthwatts 430 though... it's one of the most popular PSUs on the forums here and always shows up for cheap in the hot deals section, often bundled with an Antec case. Wish you'd give us more details on its efficiency, ripple, and your overall take. I don't think you actually said anything about its performance at all. Thanks!
  • OddJensen - Monday, January 5, 2009 - link

    Isn't there a Delta made version of the 430 as well?
  • Christoph Katzer - Monday, January 5, 2009 - link

    Yes which we didn't have.
  • Christoph Katzer - Wednesday, December 31, 2008 - link

    http://www.anandtech.com/casecoolingpsus/showdoc.a...">http://www.anandtech.com/casecoolingpsus/showdoc.a...

    Here's the original review from a year ago. Even though I didn't mention it in the conclusion I think you have a great comparison with the respective graphics towards the end. :)
  • donjuancarlos - Wednesday, December 31, 2008 - link

    Thanks for this article. I am one of those who does modest OCing and no SLI, and this article was pertinent for me.
  • eetnoyer - Wednesday, December 31, 2008 - link

    No temperatures at load? I would think that temps at 100% load for each unit shouldn't be too much. Just as a worst-case thing.

Log in

Don't have an account? Sign up now