Crysis Performance

Simply because it is Crysis, we must take a look at performance. And in this case, R700 performed right on point with 4870 in CrossFire.

Crysis


Click to Enlarge

Unfortunately, CrossFire leaves a lot to be desired in terms of multi-GPU performance scaling under Crysis. SLI scales much better, but the fact that R700 performs identically to 4870 in CrossFire means that it is at least significantly faster than a single GTX 280. Which isn't shabby.

Age of Conan Performance The Elder Scrolls IV: Oblivion Performance
POST A COMMENT

56 Comments

View All Comments

  • gigahertz20 - Monday, July 14, 2008 - link

    AMD needs to get on the ball with their drivers, they still don't even have the 4850 and 4870 listed on their site under video card drivers.

    http://ati.amd.com/support/driver.html">http://ati.amd.com/support/driver.html

    Seems like all their effort was put into just releasing the hardware to sell and make money, and not putting as much time into perfecting the drivers as they should be.
    Reply
  • docmilo - Wednesday, July 16, 2008 - link

    This hotfix is a new set of drivers for the 4800 series. I installed them last night on my 4850 and when I run the Overdrive I reach 700mhz on the gpu stable.
    Reply
  • docmilo - Wednesday, July 16, 2008 - link

    Well the link didn't work. Here's the address:

    http://support.ati.com/ics/support/default.asp?dep...">http://support.ati.com/ics/support/defa...mp;task=...
    Reply
  • Lerianis - Monday, July 14, 2008 - link

    They probably haven't released a new driver for these cards yet and expect you to use the driver they include on the disk with the card. Wait until next month, they will most likely finally have a driver on their website for these cards. Reply
  • alzg22 - Monday, July 14, 2008 - link

    They do have drivers, Catalyst 8.6 introduced support for the 4800 series. It's just not listed under the driver finder, probably. Reply
  • bob4432 - Monday, July 14, 2008 - link

    i think they are referring to a driver that changes the fan speed so you don't cook the 4850/4870s.... Reply
  • KikassAssassin - Monday, July 14, 2008 - link

    You can do that now by creating an Overdrive profile in the control center, and editing the profile's file (Documents/username/AppData/Local/ATI/ACE/profilename.xml) in Notepad. There's a line in there for fan speed that you can edit. I set mine to 40% (up from the default 20%) and idle temps on my 4870 dropped from about 75C to 45C, and load temps dropped from about 95C to about 65C. 40% fan speed was right about at the upper limit I could set it to before the fan noise became annoying (the thing seriously sounds like a freaking jet engine at max speed).

    It'd be nice if they'd add an option to change the fan speed in the control center, though.
    Reply
  • sc3252 - Monday, July 14, 2008 - link

    This card is hot for a $500 video card. I cant wait to pick one up. Two questions I have. Does it actually share the memory or is it separate? Did they fix the stutter associated with Crossfire? Reply
  • DerekWilson - Monday, July 14, 2008 - link

    oh yeah, and we're going to wait until the card actually comes out to look at things like micro-stutter etc... Reply
  • DerekWilson - Monday, July 14, 2008 - link

    memory is not shared. shared framebuffer won't come out for a while yet apparently ...

    each GPU has a separate 512MB framebuffer.
    Reply

Log in

Don't have an account? Sign up now