For a bright-eyed teenager in 1976 that had high hopes of becoming a journalist one day, the satirical film Network was a revelation suggesting maybe choosing another profession would be a wise move. (Ed: Look at where that got you.)  After years of intense investigative coverage of Watergate and the resulting rise in credibility of the journalistic profession, it seemed the right - maybe even honorable - field of study during the college years... until that fateful New Year’s Day in 1976.

In 1976, the country was celebrating its bicentennial, trying to put Watergate and the Vietnam War out of our minds, and looking forward to an election that would chart a new direction in American politics. (These subjects sound familiar 32 years later.) Top films of that year really did represent what we were going through, and to some degree what we would become in the near future. 

Rocky found us in love with the underdog who never gave up. All the President’s Men gave us a short synopsis of the Watergate scandal from the perspective of the journalistic team (Bernstein/Woodward) that broke the story and proved that journalists were sexy, provided you resembled a young Robert Redford. The Bad News Bears allowed us to take a humorous look at sports obsessed parents realizing that winning at any cost had taken the joy out of playing the game for many kids (kids who would become today’s Soccer Moms and Dads).

I enjoyed many other movies that year with my friends, which more or less fit in with our very sarcastic yet humorous personalities.  Some were dark like Taxi Driver, Marathon Man, The Omen, Obsession, and Carrie, while others were on the lighter side such as Silent Movie, The Pink Panther Strikes Again, Silver Streak, and Mother, Jugs & Speed. Of course, we also had the breakout science fiction films, Logan’s Run and Futureworld. (Told you we were sarcastic.) All told, it was a decent year for film, and some thirty years later we still have Rocky, Pink Panther, and King Kong remakes.

However, there was one film that year that left a lasting impression on us; that film was the aforementioned and critically acclaimed Network. What All the President’s Men did to glorify the journalistic profession; Network succeeded in displaying the dark and seedy side of media. In retrospect, it also provided a fairly accurate glimpse of where TV/Print media was headed along with society. Sensationalism - some would say yellow journalism - sells and is what a large cross-section of society enjoys, whether they openly admit it or not. 

In Network, Peter Finch played the aging news anchor, Howard Beale, who at one point in the film makes an impassioned speech that resulted in an extremely popular catch phrase of the time. He persuaded his watching audience to step outside and shout, “I’m mad as hell, and I’m not going to take this anymore!”  This phrase struck a chord with mainstream America during that year and with us now.

It has been a couple of rough weeks for the motherboard team. Our best laid plans have been thwarted for a variety of reasons, most of which have us shouting the above phrase, and we are sure some of you feel the same way.  Since the news and review sections are fairly quiet over the weekend, we thought it would be a good time to discuss those items that put a burr under our saddle - to address issues that our readership is having with the technology and companies that we cover on a periodic basis. Believe it or not, we rarely get to rant (and for very good reasons as you will see), but sometimes it's necessary to say what one thinks.  So here is Rant Session #1 for your weekend enjoyment.

 
AMD 780G Goes Boom
Comments Locked

81 Comments

View All Comments

  • Lashek - Wednesday, April 23, 2008 - link

    Reviewer Product Review

    Manufacturer Response:Those are unusual issues, especially the CPU multiplier adjusting. We do have a new BIOS that has just been released (www.xfxforce.com) also feel free to contact myself at Neweggsupport@xfxforce.com or the XFX Support staff at www.xfxforce.com / 800-880-3225 so we can help out
    SUPPORTWindows Vista32/64 Realtek Audio (R1.90) support files for product MB-N790-IUL9 have recently been updated. (Friday, April 18, 2008)SUPPORTWindows XP32/64 Realtek Audio (R1.90) support files for product MB-N790-IUL9 have recently been updated. (Friday, April 18, 2008)SUPPORT790i SLI Bios Update Nvidia (P04) support files for product MB-N790-IUL9 have recently been updated. (Monday, April 21, 2008)SUPPORT790i SLI Bios Update XFX (P04) support files for product MB-N790-IUL9 have recently been updated. (Monday, April 21, 2008)HELP DESKXFX reply to ALL messages via the ticket system. We send automated emails to advise if we have new information available, due to the nature of email we cannot guarantee delivery of and so recommend that you log in regularly.HELP DESKXFX reply to ALL messages via the ticket system, but Due to unprecedented demand of our support, we are currently experiencing longer waiting times than normal. Please allow upto 48 Hours for an initial response. Alternatively please use our LIVE HELP system, this is available from the drop down box next to your registered product. Thank you for patience, regards XFX SUPPORT TEAM



  • Lashek - Wednesday, April 23, 2008 - link

    Reviewer Product Review
    Lashek Tech Level: somewhat high Ownership: 1 month to 1 year This user purchased this item from Newegg.com 4/15/2008 5:41:49 AM memory problems

    Pros: superior porformace ,and bios menus 4 u overclockers .and easy setup

    Cons: a) CPU multiplier likes to changes at will, causing an inability to POST after changing BIOS options. (Problem is likely linked to bad NVIDIA base code). b) Poor memory read performance above 475FSB unless you enable “P1” and “P2” which NVIDIA refuses to document operation of or provide information about. c) EVGA/XFX (NVIDIA reference design) lacks support for tRFC tuning - high density DDR3 configurations often refuse to work unless the module SPDs are tuned from the manufacturer. (This makes them needlessly slow in low-density configurations.) d) The chipset does not do a very good job of balancing read vs. write priorities with respect to memory access - copy scores lower than X38/X48. e) Regardless of what NVIDIA says, we think PCI-E 2.0 (and 1.x) implementation is still better on Intel’s Express chipsets - give us SLI on Intel to prove it!!! f) Possible problem with NVIDIA reference design: sustained overclocked operation at >~1.9V for VDIMM may cause critical failu

    Other Thoughts: buy asus striker Extreme board instead! Manufacturer Response:Those are unusual issues, especially the CPU multiplier adjusting. We do have a new BIOS that has just been released (www.xfxforce.com) also feel free to contact myself at Neweggsupport@xfxforce.com or the XFX Support staff at www.xfxforce.com / 800-880-3225 so we can help out
  • recneps77 - Friday, April 11, 2008 - link

    So was the Gigabyte stable @ stock?
    Because I learned of all this AFTER my cpu had shipped..
    its a 9750, 125W.
    The board is back ordered, so I can cancel it if need be, but its gonna cost me a 'restocking' fee to exchange the cpu (such a rip).

    Can anyone confirm this for me?
    Gigabyte's site lists all of the B3's under supported, except the 9850 says 'unofficially supported'
  • bobaboo - Sunday, April 13, 2008 - link

    it will run it just fine
  • Visual - Thursday, April 10, 2008 - link

    [quote](4/9/08 Update - We will post an update to this article on 4/10/08 that addresses problems/concerns raised in this story, working with Gigabyte / ASRock on 9850BE certification tonight)[/quote]
    I have been waiting anxiously for the update since yesterday... If I'm not hallucinating this text used to say the update will come on 4/9 and it now says 4/10, and the day is almost over...

    I'm starting to wonder, maybe the update is up somewhere, linked between the 3.14-th and sqrt(-1) page of the article and I just didn't notice it...

    LOL yeah, I know I'm not helping any, and I apologize for being so impatient. Of course, take your time and do things the proper way instead of rushing them.
  • amdmobo - Thursday, April 10, 2008 - link

    Hi, you are not alone. I have been waiting the update since 2 days ago. Yeah, they delayed the date I guess.
  • kzi - Thursday, April 10, 2008 - link

    I'd like to run such a 780g board with two monitors attached to it.
    So I hope you don't forget to look how good the display quality is in such a configuration.
  • insider - Thursday, April 10, 2008 - link

    "check gigabytes website the 9850 is now supported on their cpu list for 780g platform.Bios f3"


    can somebody tell me please whether it's safe to run a Phenom 9850 on this MoBo or not ???
  • Sb1 - Thursday, April 10, 2008 - link

    I appreciate Gary and AnandTech for publishing this article.
    When there are problems I think it's good that they get disclosed. It helps the consumers make more informed decisions and in turn shows manufacturers that they need to address the issue or issues. If they do not then people can take their business elsewhere. Because most people don't have time to read up on multiple forums, even if they are into technology. If they handle it correctly and fess up, it may still p**s you off but you can give them the benifit of the doubt because you know that there are problems in most everything. It's how it is handled that make up peoples real opionions over time of a company.

    I was thinking of purchasing that Gigabyte 780G based motherboard and build it for a friend and possibly for myself once I sell two other PC's. Don't know if he wanted the newest 125w quad cores, but if he did and there were problems I probably would of not bought anything from Gigabyte once I found out on forums that they did not properly update their website for CPU support on this and the 680i based ones I luckily came across in the last few days. Now I am going to look elsewhere. I just bought an Abit IP35 Pro and was seriously considering a Gigabyte board, told my friend to get one for his Q6600 last summer and he did.
  • duron266 - Thursday, April 10, 2008 - link

    click to view

Log in

Don't have an account? Sign up now