The Core 2 Quad Q9300: Benchmarked

When Intel launched the Core 2 Quad Q6600 it was an instant hit in the enthusiast community. You didn't have to give up much in clock speed over an equivalently priced dual core (only 266MHz), but you got four very fast cores to do with what you will. When Intel unveiled its 45nm quad core QX9650 we were excited, but what we really wanted was the Q6600's successor.

We knew from looking at Intel's roadmaps that its successor would be the Q9300, priced at $266 (identical to the Q6600, at least on paper) this would be the new Q6600. We had 45nm quad core chips on hand, but we couldn't simulate the Q9300, the table below explains why:


  Clock Speed L2 Cache Size FSB
Intel Core 2 Quad Q9450 2.66GHz 12MB 1333MHz
Intel Core 2 Quad Q9300 2.50GHz 6MB 1333MHz
Intel Core 2 Quad Q6600 2.40GHz 8MB 1066MHz

 

While all of the other 45nm quad core CPUs have 12MB of L2 cache on chip (6MB L2 per pair of cores x 2 pairs of cores = 12MB), the Q9300 only has 6MB (3MB L2 per pair of cores x 2 pair = 6MB). The 6MB is also less than the 8MB on the Q6600, but the Q9300 runs 100MHz faster, has a 1333MHz FSB (vs. 1066MHz) and all of the minor architectural tweaks present in Penryn. The question then becomes, is the Q9300 any faster at all than the Q6600?


The new Intel Core 2 Quad Q9300

Thankfully we can finally find out. The Q9300 just started shipping and you can now buy them from Newegg, but as we mentioned before they carry a 12% price premium due to limited supply. Assuming that the pricing issues get fixed next quarter, let's see how the Q9300 behaves as a Q6600 successor:

The 7.4% average performance increase over the Q6600 isn't bad at all, especially if we're looking at price-parity. The Q9300 sell becomes even easier when you look at power data:


  System Idle Power System Load Power
Intel Core 2 Quad Q9300 113W 154W
Intel Core 2 Quad Q6600 136W 210W

 

The Q9300 can be noticeably faster than the Q6600 depending on the benchmark, and it does so while consuming significantly less power. We'd say that makes a pretty good successor to the first affordable quad core CPU.

Intel's 45nm CPUs: High Prices and Limited Availability, When Will it End? Wolfy, How Fast Art Thou?
Comments Locked

65 Comments

View All Comments

  • chizow - Thursday, March 27, 2008 - link

    I kinda agree with the others about this being a massive fluff piece. The following take on clock speeds really emphasizes the bias built into this article, about Phenom's clock speeds and potential performance:

    quote:

    AMD told some members of the press that there was nothing special about these 3.0GHz Phenoms that were demoed, which begs the question - what happened?

    There's nothing particularly magical about the 3.0GHz number, but the problem is this:


    and on the very next page:

    quote:

    We aimed for 3.0GHz and while we could get into Windows and run some benchmarks, we couldn't get it 100% stable. In our opinion it's highly unlikely we'll see AMD release a 3.0GHz Phenom on 65nm this year. It may be possible on 45nm but it's still too early to tell if that'll be this year or not.


    There isn't anything special about 3GHz, AMD just can't get this hot turd to run that fast, period.
  • pomaikai - Thursday, March 27, 2008 - link

    Just bought a phenom for an upgrade. It is the old stepping, but the person I got it for will never do virtualization or overclock. I couldnt pass up an OEM Phenom 9600 for $132.
  • Dribble - Thursday, March 27, 2008 - link

    I agree Q9300 is no Q6600 replacement because the whole point of the Q6600 was you could over clock it to get a real high performance part. Because the Q9300 uses the 333 fsb trying to get over clocks similar to even the Q6600 requires a much higher fsb. Particularly as the max fsb for a quad is significantly lower then for dual's, you'll max out most motherboards before you even reach the max possible Q6600 speeds.
  • coldpower27 - Thursday, March 27, 2008 - link

    Q9300 is a reaplcement if your not an overclocker it has better stock perfomrance and to most of intel's OEM's it is, so overall it is a better. From both a stock performance and energy consumption standpoint.

    If your trying to overclock you will likely need at least the Q9450.
  • 7Enigma - Thursday, March 27, 2008 - link

    I have been waiting to build a system now for a couple months and I really wanted to use the 9450 due to the 12mb cache compared to the Q9300. The newegg out of stock price, however, is listed at $380!!!

    My price sweetspot for a CPU has always been around $300 since I only upgrade systems every 3-4 years so am willing to spend more on the cpu than other components.

    Anand, do you happen to have a comparison between the 9450 and 9300 (preferably at the same clock speed?) to see exactly how much that doubling of L2 cache helps in different situations. I primarily game, but always multitask and have other programs running so would really like to know if that extra 6mb is helpful (especially in the next 3 years).

    Thanks.
  • archcommus - Thursday, March 27, 2008 - link

    My situation exactly. I was hoping to build a new system first week of May with a 9450, due to wanting a quad-core 45nm part with the best cache/price ratio, but it doesn't look like it will be affordable by that time (I'm willing to pay $316, not more though). So I too am curious if the 9300 will fit the bill (also planning to keep for 3-4 years).
  • DigitalFreak - Thursday, March 27, 2008 - link

    AMD still make stinky stinky. Pew!
  • formulav8 - Friday, March 28, 2008 - link

    Grow up. Intel doesn't like you.
  • Proteusza - Thursday, March 27, 2008 - link

    Is it all possible for you guys to release the replay which you used to test performance? I want to compare my system to these, because I'm considering upgrading to Phenom. Pity MSI hasnt released a BIOS update for my motherboard that allows it to use Phenom CPUs, so I might be waiting a while (its a K9N SLI Platinum, in future I will just buy Asus).

    Note to anyone who plays Supreme Commander with a multicore CPU - there is a tool that improves performance by allocating threads to CPUs better. It is specific to SupCom, which tends to have one CPU with 100% usage, and the rest with 20%. The tool automatically adjusts the affinity. Go to forums.gaspowered.com and look in around for a thread related to Core Maximizer.
  • michal1980 - Thursday, March 27, 2008 - link

    Ok amd is doing better. The Q6600 has been out for what? over a year now. And its still owning AMD's baby. And to top that off, I though the whole 'pure' quad core technology was supposd to be better then the lets slap 2 dual cores into one package method of Intel.

    Its nice Amd can FINALLY start to play with the big boys... But the way this article was written is just garbage, A year late and a dollar short.

    As for price the q6600 is dropping all over the place... Frys had it for 180 yesterday, Microcenter has it for 200.

    So why is this article written in such postive light for AMD? A nice paycheck for the author. The conclusion is clear... Intel OWNS AMD. The price difference on the market is 0. The ability to overclock the q6600 is as easy as switching the bus to 1333mhz, and the ownage will grow.

    So yes amd made an improvemnt over the crap they had. However their current cream of the crop is owned by the 1+ year old stuff.

    Its like getting into the hotest club right before they close... Wow you got in... But its time to go.

Log in

Don't have an account? Sign up now