Test Setup



There's not too much to say about the test platform except it's fast. We are utilizing Vista 64-bit SP1 as our OS of choice now. We are still in the process of comparing our NVIDIA-based setup to the Intel X48 for future drive articles. However, performance differences between the two platforms are within 1% of each other with single drives. Native Command Queuing is enabled for all drives and the drive is formatted before each test run along with the prefetch folder being cleared. We run each benchmark five times and throw out the high and low test scores, then average the remainder for our results.

Quick Tests

We are providing PCMark Vantage results today along with initial acoustic and thermal results. The details about the PCMark Vantage HD suite tests and how results are determined can be located here. Our acoustic tests measure the decibel levels while the system is at idle and under load while running the Hard Disk test suite within PCMark Vantage. We take measurements at a distance of 5mm from the rear and front of the drive in a separate enclosure. The test room has a base acoustical level of 20dB(A).

Our thermal tests utilize sensor readings via the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) capability of the drives as reported by utilizing the Active SMART 2.6 utility. We also utilize thermal sensors and infrared measurement devices to verify our utility results. We test our drives in an enclosed case environment. Our base temperature level in the room at the time of testing is 24C.



The WD 640GB drive generates an excellent score in the PCMark Vantage tests that simulate real-world performance patterns utilizing a variety of actual applications. The Samsung F1 750GB drive sports a 32MB buffer while the WD 640GB "gets by" with a 16MB buffer that has been highly tuned for random seeks and small sequential block sizes. The WD 640GB drive leads in all PCMark Vantage categories except the Windows Defender and Media Center applications where the Samsung exhibits exceptional results. These scores reflect our own off-line application benchmark testing, where we saw similar results because the 32MB buffer greatly assists in the read performance of large data block sizes accessed in sequential order.

The one area that really disappointed us with the WD 320GB drive was its pitiful random access times at 16.4ms. After a lengthy conversation with Western Digital, we now understand why the drive performed so poorly in this test. This also explains the good but not great application results in general. Granted, the drive still performs well, but the initial specifications lead us to believe that performance should have been greatly improved over previous generation drives. Western Digital explained the single platter 320GB drive is aimed at the entry-level market where thermals and acoustics are critical for mass acceptance of the drive by the OEM and retail customers.

WD sacrificed a small amount of performance on the 320GB drive to meet these goals. This was by design and is not an indication of the performance potential of their new technology. In fact, these same 320GB platters will be used in single-sided form eventually for the 160GB drives. According to statistics, the 160GB drives have quickly replaced the 80GB products to become the new "sweet spot" in the general market. As the capacities increase, the typical user for these products normally expects a balance between performance, thermals, and acoustics. With that in mind, WD tuned the 640GB drive for additional performance at the expense of acoustics.

As far as acoustic testing, this drive posted excellent results, although thermals were higher than we expected considering the Samsung drive is carrying an additional platter and set of heads. Even during heavy seeks, noise levels remained muted, and at idle the drive's acoustical footprint was almost silent. The numbers suggest that the 640GB is very close to the 320GB drive in acoustics. In most ways it is, but we could definitely hear a difference in the seek operations between the two drives. The Samsung F1 offered similar acoustics to the WD SE16 640GB drive but during seeks the drive had a slightly heavier tone that showed up in the recordings.

In our first application tests (additional results are coming soon), the drive has performed slightly better than the Samsung F1 in areas such as program loading, gaming, and digital image manipulation. The WD drive is slightly slower in our Nero Recode 2 benchmark and at streaming multi-gigabyte files. This is due to the differences in buffer sizes at this point as far as we can determine. However, the differences between both drives are minor and are something that the majority of users would never notice. This drive excels in providing excellent acoustics and performance while thermal management is acceptable for this capacity range.

Just how well this drive compares to the latest competition in the 750GB range is something we will answer in the near future. Even at this point in testing, the WD Caviar SE16 640GB drive already has our tentative recommendation for users looking for a larger capacity drive for a gaming or audio/video/digital image workstation. The drive is very good, but we need to pound on it for the next several days under varying conditions along with additional analysis before we can give it our full recommendation.

Index
POST A COMMENT

40 Comments

View All Comments

  • Noya - Saturday, March 22, 2008 - link

    So you're decoding video and unRAR'ing large files on a single hard disk at the same time?

    That will definitely shorten the life of a hard drive and possibly lead to corrupted data. You shouldn't read and write multiple giant data files at the same time on a single drive.

    You need multiple separate physical hard disks for that. I do similar stuff (gaming/downloading/video encoding) at the same time but I have three hard disks and nearly always read from one and write to the other...it's 5x faster than doing it on one disk.
    Reply
  • Johnniewalker - Thursday, March 27, 2008 - link

    lol

    You sound like the teenage salesperson at fry's spewing FUD to sell multiple HDs to someone.

    Just enough truth in your statement to convince someone who doesn't know better, but mostly bs.

    Adding an additional HD would be very smart. 3 HD's are not going to be 5 times faster than one, but might approach 3 times faster. The size of files is not going to affect hd life, nor corrupt data.

    How many server admins had/have servers with a single hd (sometimes mirrored, sometimes not), with hundreds of users that were reading and writing 'large' files on a single hd at the same time. I remember a novell 3.11 server we had with a single 2.1gig hd that ran for 400+ days without a reboot until we shut it down. We had 250 users on that system and we were a mfg company that ran 3 shifts/ 24/7. HD's have only gotten more reliable since then.
    Reply
  • GarfieldtheCat - Friday, March 21, 2008 - link

    Gary,

    You note that the 750Gig Samsung uses 333Gig/platters, and they are just short stroked.

    Everything I have read/seen is that this drive uses a 3x250 design. I have seen various HDtune and HDtach results that show a significant lower STR then the 1 Terabyte Samsung, which would seem to indicate lower density platters.

    Did you run HDtune on the WD 640Gig and Samsung? If the Samsung is a 2 platter drive, it should have a similar STR profile (the max STR should be the same), and the STR average should even be higher then the WD is the drive is indeed short-stroked, since the min STR should be higher then the WD.

    Reply
  • bradley - Saturday, March 22, 2008 - link

    I own the Samsung HD753LJ, and it benches very much like any other 250 platter drive. Great drive, but I'm pretty sure this is a 3x250 platter design. Information to the contrary might have originated from a poorly worded review at Tom's Hardware. Reply
  • blaster5k - Friday, March 21, 2008 - link

    I was thinking the same thing. The 750GB is a 250GB platter drive I thought, so it's not really an apples to apples to comparison. The 1TB drive would be a much better comparison. Reply
  • GarfieldtheCat - Friday, March 21, 2008 - link

    GAry,

    I found one of the threads that shows STR rates.

    http://www.xtremesystems.org/forums/showthread.php...">http://www.xtremesystems.org/forums/showthread.php...

    The WD 320Gig shows (max STR/min STR) 113/58
    The 1 Terabyte Samsung was 117/55
    The 750Gig Samsung was 96/47
    Someone even had a Samsung 320Gig, and it was 114/58

    All the 330/333 Gig/platter drives show ~113-117 Max, 55-58 Min which is pretty different from the 96 Max, 47 Min of the 750Gig.

    Reply
  • tayhimself - Friday, March 21, 2008 - link

    This is great info, thanks for sharing. Reply
  • DigitalFreak - Friday, March 21, 2008 - link

    Western Digital? Eeewwww. Aside from the Raptors, every WD drive I've owned has died a premature death. My Seagates, Samsungs and Hitachis, on the other hand, are still humming along. Reply
  • Griswold - Tuesday, March 25, 2008 - link

    Yet another tool implying that his vastly limited sample size qualifies him to draw a conclusion on whole brands.

    Just for the record, I like my two 3 year old Samsungs still as much as I like the 6400AAKS I bought a couple weeks ago - despite of what all the monkeys say about Samsungs allegedly fubar QC.
    Reply
  • strikeback03 - Monday, March 24, 2008 - link

    I also avoided WD for a while after a few of my roommates together had 4 WD drives die over about a 2 month period. I have used a few recently though without problems.

    I purchased 2 Samsung HD501LJ drives based on the good reviews here. I have had to RMA one of them twice as it sprung bad sectors. Samsung service was fine and the third seems OK, but it is not encouraging to have a replacement drive from RMA start clicking immediately upon trying to format.
    Reply

Log in

Don't have an account? Sign up now